[og 1 THE DRAWING BS UNFUBLSHED. | commen oy ~ MECHANICAL: RELEASED FOR PUBLICATION IL RRA RESERVED, .725 MAX = .6607:015 a | TOP OF m\ (575 +018 al Suggested Panel Cutout -010 -850 MAX J 4.6. 8 / 100 [ INS ay SOR YNIHD OMMAA 1-ZOoZsgog99| a= WU | ~ ~ -020 #.062(2X) Pt .425 _.| 030 .126(2X) 706 10/100 BASE-T CIRCUIT A\ A\ z a \ \ oO Oo 0 1) 3.5 |7 \ | .050 TYP \ / 100 TYP 350 Pin Designations .050 TYP 9.035(8X) { +350 -250 A -272 MIN. ANODE (+) TYP LED CONFIGURATION FOR BI-COLOR C1=1000pF. 2kV CAPACITOR R1-R4 = 75 OHMS, 1/16 W RESISTORS .040(4X) Suggested PCB Layout (Component Side) - OPERATING TEMPERATURE: FROM 0C - +70C. . THESE PARTS ARE RECOMMENDED FOR WAVE SOLDERING PROCESS, ioe AA DST REVISIONS: 22 | oe DESCRIPTION REVISED PER ECO-11-005140 ECO11-015766 Ce [_zomarit | RK ae [somarzors] EL | LR ry [er | LF | MATERIALS: HOUSING - THERMOPLASTIC PET POLYESTER FLAMMABILITY RATING UL 94V-0. SHIELD - .010 THICK, (26800 BRASS PREPLATED WITH 30pinch SEMI-BRIGHT NICKEL; SOLDER TABS POST-DIPPED WITH 100pinch MIN SAC SOLDER. MOD JACK CONTACTS - .0157" x .018" THICK, PHOSPHOR BRONZE, 5Opinch MIN OVERALL NICKEL UNDERPLATE, WITH SELECT SOyinch MIN HARD GOLD FINISH PLATE. SOLDERTAILS WITH 100pinch MIN MATTE TIN AND/OR SAC SOLDER DIP. LIGHT EMITTING DIODE(LED) - DIFFUSED EPOXY LENS, .020 x .020" CARBON STEEL WIREFRAME LEADS PREPLATED WITH 80uinch SILVER OVER 4Qminch NICKEL UNDERPLATE OVER 40pinch COPPER UNDERPLATE; POST-PLATED WITH 100pinch MIN MATTE TIN AND/OR SAC SOLDER DIP OR PURE TIN SOLDER DIP. RJ&5 JACK CAVITY CONFORMS TQ FCC RULES AND REGULATIONS PART 68, SUB PART F. MAGNETICS: -APPLICATION: 10/100 BASE-T -IMPEDANCE: 100 OHMS -TURNS RATIO (CHIP:CABLE): TX = 1:1, RX = 1:1 -OPEN CIRCUIT INDUCTANCE (OCL}: 350uH MIN @100kHz, 0.1VRMS, 8mADC BIAS FROM 0C TO 70C, TX AND RX -PERFORMANCE @ 25C: INSERTION LOSS (IL): 1.1dB MAX FROM 0.5MHz TO 100MHz RETURN LOSS (RL}: 18dB MIN FROM 0.5MHz TO 30MHz 18-20LOG(f/30)dB MIN FROM 30.1MHz TO 60MHz 12dB MIN FROM 60.1MHz TO 8OMHz CROSSTALK ATTENUATION: 35dB MIN FROM 0.5MHz TO 40MHz 33-20LOG(f/50)dB MIN FROM 40.1MHz TO 100MHz COMMON MODE REJECTION RATIO (CMRR): 30dB MIN FROM 0.5MHz TO 100MHz -ISOLATION VOLTAGE:2250VDC (MAX) FOR 60 SECONDS WITH A RISE TIME OF 500V/SEC, THE 250 OHM LED RESISTORS ARE OPTIONAL, PLEASE SEE CHART FOR PRESENCE OR ABSENCE OF LED RESISTORS. IF THE LED WITHOUT 250 OHM RESISTORS, LED IS DRIVEN WITH CONSTANT CURRENT AT APPROX 20mA. LED COLOR: DOMINANT WAVELENGTH (AD): GREEN 568 nm TYP @ IF=20mA FORWARD VOLTAGE (VF): GREEN 2.2V TYP @ IF=20mA DOMINANT WAVELENGTH (AD): YELLOW 588 nm TYP @ IF=20mA FORWARD VOLTAGE (VF): YELLOW 2.1V TYP @ IF=20mA IF THE LED WITH 250 OHM RESISTORS,LED IS DRIVEN WITH 5V VOLTAGE AND THE MAX OPERATING CURRENT IS 20mA. LED COLOR : DOMINANT WAVELENGTH (AD): GREEN 568 nm TYP @ VF=5V FORWARD CURRENT (IF): GREEN 12 mA TYP @ VF=5V DOMINANT WAVELENGTH (AD): YELLOW 588 nm TYP @ VF=5V FORWARD CURRENT (IF): YELLOW 13 mA TYP @ VF=5V INDICATED CONNECTIONS ARE FOR NIC CONFIGURATION, THE MAGNETICS ARE SYMMETRICAL, AND THEREFORE DOES SUPPORT AUTO-MDI/MDIX. TE CONNECTIVITY LOGO,TE CONNECTIVITY PART NUMBER, DATE CODE, COUNTRY OF ORIGIN AND AGENCY APPROVAL MARKING IN APPROXIMATE LOCATION SHOWN. PREHEAT TEMPERATURE IS 120C TO 160C, 120 SECONDS TO 180 SECONDS, PEAK SOLDERING TEMPERATURE IS 260 C MAX, 10 SECONDS MAX | -145+.010 YES: GREEN YES GREEN YES 666057021 -145,010 YES GREEN NO GREEN NO 566057027 -145+.010 YES GREEN/YELLOW| NO GREEN/YELLOW NO 56605702-6 -1454.010 YES: GREEN YES YELLOW YES 56605702-1 -100,.010 YES GREEN/YELLOW NO IGREEN/YELLOW NO 26605702-6 -145+.010 NO YES GREEN YES 16605702-1 250 OHMS DIMENSION A DECOUPLING CAPACITOR 250 OHMS RESISTOR, LED2 RESISTOR PART NUMBER THIS DRAWING IS A CONTROLLED DOCUMENT. 7 TRENGS .GRZYBOWSKI FAROLE TE TaRNOS TE Connectivity DIMENSIONS: INCHES TOLERANCES UES ERWISE, SPECIFIED: 318 TRRNOS [Wwe 2 FAROLE 1X1 MAG4S(TM), MODULAR JACK, 7N7 SCHEMATIC, 706 SERIES CIRCUIT, SHIELDED, OPTIONAL DECOUPLING CAPACITOR, WITH LEDS 108-2100 PAPPLICATION SPEC Hei ee on lo pic - 1 Pic = 2 Puc a iS Puc oc 4 PLo 2 SIZE | GMIE CODE ORANG RO RESTRICTED TO] +t BS MATERIAL FINISH = A AN ICUSTOMER DRAWING veer A 1|00779\G=6605702 - P= vrs 4% e082 G/11) Lo ed