NEED PRODUCT
GROUP PHOTO
TE Connectivity’s (TE) BUCHANAN WireMate two-piece poke-in
series of products provide designers a three directional solution for
wall mounting a device and improve the overall installation experience
for the novice installer. Wires are routed through an opening in the
wall to TE’s BUCHANAN WireMate connector mounted on a wall plate.
The wires are stripped of insulation and easily poked into the terminal
block device providing a reliable termination without the need for
tooling. Wire extracting is also made easy, with simple levers to release
individual wires. The mating header is surface mount attached to the
PCB in the device to be mounted on the wall. The two-piece combination
allows wall mounting of a device in three dierent directions; into the
wall, along the wall and in a twist or rotating motion.
Benefits
• Installation time-saving with
poke-in termination verses screw
style termination
• Simple lever design for release of one
wire at a time
• Provides flat connector surface reserved
for wire marking (color options available)
• Allows easy wiring for home installation
with tool-less poke-in wire termination
• Achieve a clear point of entry for wire
insertion
• Improve installation experience with three
mating directions
BUCHANAN WireMate
TWO-PIECE POKE-IN
SERIES
Applications
• Thermostats
• Smoke detectors
• Control panels
• Environmental monitors
Electrical
• Current Rating: 5A (18 AWG); 3A (20-24 AWG)
• Voltage Rating: 250 VAC
Mechanical
• 2mm panel thickness
• 18-24 AWG (solid); 18-22 AWG (stranded*)
• 10mm height (from wall plate to PCB)
Specifications
• Product specification: 108-133105
• Application specification: 114-133111 (header)
114-133105 (connector)
• UL E60677
Materials
• Header: LCP (UL-94 V0)
• Connector housing: PBT
• Contact: Cu-alloy, Sn plated
• Operating temperature: -40 to 85˚C
*Submitted to UL
INDUSTRIAL /// BUCHANAN WIREMATE TWO-PIECE POKE-IN SERIES