Web Site: www.parallax.com
Forums: forums.parallax.com
Sales: sales@parallax.com
Technical: support@parallax.com
Office: (916) 624-8333
Fax: (916) 624-8003
Sales: (888) 512-1024
Tech Support: (888) 997-8267
Copyright © Parallax Inc. BASIC Stamp HomeWork Board 10-pack (#28158) v2.0 9/7/2011 Page 1 of 4
BASIC Stamp® HomeWork Board™ USB
Single (555-28188) or 10-p ack (#28188)
This economical development platform with a surface-mount BASIC Stamp 2 microcontroller module was
designed with beginners and student budgets in mind; the 10-pack perfect for outfitting a classroom. It is
compatible with
What’s a Microcontroller?
,
Robotics with the Boe-Bot
, and most other Stamps in Class
tutorials. See the Program Overview link at www.parallax.com/education for complete details.
Features
Built-in, surface-mount BASIC Stamp 2
microcontroller
BASIC Stamp I/O pins plus power
connections are brought adjacent to a
2" x 1 3/8" breadboard.
Built-in 220-ohm series resistors
between the I/O pins and breadboard
for a bit of protection in case of wiring
errors
On-board regulator delivers up to
500 mA of current for BS2 and
breadboard circuits
LED connected to the BS2’s EEPROM
clock line shows when a program is
running
Reset button
9 V snap-style battery clip with strain-
relief holes to make it easy to strap the
battery in place for mobile applications
Grounded 0.125 in (3.18 mm) corner
mounting holes, at 3.7 x 2.75 in (9.5 x 7
cm) on centers
4 peel-and-stick rubber PCB feet
included
Application Ideas
BASIC Stamp-related homework
assignments
Dedicated science fair, contest, or
hobby projects
Affordable ‘nodes’ in a BASIC Stamp 2
network
Key Specifications
Power requirements: 9 V battery; BS2
requires 7 mA running, 50 µA in sleep
Communication: USB mini-B to onboard
USB to RS-232 converter
Operating temperature: 32 to 158 °F
(0 to 70 °C)
Dimensions: 3.05 x 4 in
(7.75 x 10.16 cm)
Additional Items Required
USB A to Mini-B cable (#805-00006)
9 V battery
PC running Windows 2K/XP/Vista/7 for
the BASIC Stamp Editor software. USB
drivers are included with the softwar e
installer which is a free download from
www.parallax.com/basicstampsoftware
Copyright © Parallax Inc. BASIC Stamp HomeWork Board 10-pack (#28158) v2.0 9/7/2011 Page 2 of 4
BASIC Stamp HomeWork Board Features
1. 9V Battery Clip: You can use alkaline or rechargeable 9-volt batteries. Disconnect the battery to
turn off power to your board.
2. USB Programming Connector: This is a USB Mini B socket and USB to serial (RS-232) circuitry
for programming and for two-way serial communication between the BASIC Stamp and your
computer. The required USB drivers for Windows were included in the BASIC Stamp Editor
software installer; see the USB Drivers page at www.paralllax.com/usbdrivers for more
information.
3. Voltage regulator: Supplies regulated 5 V, up to 500 milliamps with a 9 V battery. This supplies
the BASIC Stamp and sockets labeled Vdd for circuits you will build on the breadboard area
4. Power header (X3): The sockets labeled (+5)Vdd connect to +5 VDC, (+)Vin connects directly
to the power supplied to the board by the battery clip (+9 VDC typical), and (-)Vss connects to 0
V (ground).
5. Breadboard: The breadboard has metal clips that run underneath the white plastic board in a
horizontal fashion. Each strip connects a 5-socket group, with two groups to each row, separated
by a center trench. Wires or legs of components plugged into the same 5-socket group will be
electrically connected. Components with many legs (such as pushbuttons or ICs), are placed in
the middle of the board so that half of the legs are on the left side and half are on the right side
of the trench. Note: Always disconnect power before building or modifying circuits!
6. I/O Pin Access Header (X4): The BASIC Stamp module's 16 I/O pins, labeled 0 to 15, are
connected to this header, so you can conveniently connect to your breadboard circuits. On this
board, there are 220-ohm resistors placed between the header and the BASIC Stamp I/O pins to
help prevent damage in case of a wiring mistake.
7. Reset Button: The reset button can be used to restart your BASIC Stamp without having to
cycle the power. This saves wear-and-tear on the battery clip for simple program restarts. Some
advanced programming techniques use the reset button and the BASIC Stamp EEPROM as a way
to toggle between different program functions.
Copyright © Parallax Inc. BASIC Stamp HomeWork Board 10-pack (#28158) v2.0 9/7/2011 Page 3 of 4
8. Running Indicator LED: This LED will light up when a BASIC Stamp program is running. It is
not a power indicator LED.
9. BASIC Stamp 2: The components of a BASIC Stamp 2 module are built directly onto the board.
It connects the BASIC Stamp to the programming connector, power, the running indicator LED,
reset button, and I/O pin header.
BASIC Stamp Resets when Connecting USB
When you connect HomeWork Board USB to a PC, the computer’s operating system typically resets the
BASIC Stamp several times as it tries to determine if a new plug-and-play device was just connected.
Disconnecting the board may also cause a reset.
Each time a BASIC Stamp is reset, all program variables are cleared, and the program starts from the
beginning. For tips on writing programs that can save variable values to EEPROM so they are not lost
during resets, see the article “USB Resets BASIC Stamp” in the BASIC Stamp Editor Help file.
Resources and Downloads
BASIC Stamp Editor programming software (free), which contains the Getting Started tutorial,
BASIC Stamp Syntax and Reference Manual
, and
What’s a Microcontroller?
text:
www.parallax.com/basicstampsoftware
The latest version of “Getting Started with Stamps in Class” with HomeWork Board USB support
may be browsed online at www.parallax.com/go/BASICStampStartHelp.
USB Drivers: The BASIC Stamp Editor software contains USB drivers for most Windows systems.
You can also check for the latest version of these driver sat www.parallax.com/usbdrivers.
Information about the BASIC Stamp family of microcontroller modules, including a comparison
chart: www.parallax.com/basicstamp
Free, moderated discussion forums: http://forums.parallax.com
Free educational tutorials and mini-projects for BASIC Stamp 2 programming, and other
resources for students a n d Educators: www.parallax.com/education; education@parallax.com.
“How To—The Basics of Breadboarding” and other YouTube videos: www.parallax.com/go/videos
Free Technical Support: support@parallax.com, or call toll-free in the Continental US:
888-99-STAMP, all others call 916-624-8333.
Copyright © Parallax Inc. BASIC Stamp HomeWork Board 10-pack (#28158) v2.0 9/7/2011 Page 4 of 4
Quick-Start Guide
Step 1
Download and install the latest version
of the free BASIC Stamp Editor
software (v2.5.3 or higher) from:
www.parallax.com/basicstampsoftware
...accepting all defaults. Note: Do not
connect your hardware until you have
followed the directions in Step 2 below.
NOTE: The latest version of “Getting Started with Stamps in Class” with HomeWork Board USB support
may be browsed online at www.parallax.com/go/BASICStampStartHelp.
Step 2
Open the BASIC Stamp Editor Software,
and select BASIC Stamp Help from the
Help menu.
Step 3
Click on the Getting Started link in the
Help file, then follow the directions in
the tutorial for connecting your board
testing your programming connection.
