XX518A1KAM12 - SCHNEIDER ELECTRIC / TELEMECANIQUE

Schneider Electric Brand

Ultrasonic Sensors

File 9006

CONTENTS

Description Page

Selection / Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370

Specifications / Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371

Ultrasonic Sensors

12, 18, and 30 mm Plastic Tubular

370 10/02

Ultrasonic Sensors

12, 18, and 30 mm Plastic Tubular/ DC

Features:

• PNP or NPN output

• Housing: Plastic

• Self-teach on 30 mm version

• Mounting nuts included

Output

Mode

Circuit

Type

Voltage

Range

Connection

Type

Load Current

Maximum

Ultrasonic

Frequency

Catalog

Number

12 mm Diameter – Nominal Sensing Range 2" (51 mm)

N.O. PNP/NPN 12-24 Vdc 4 pin Nano 100 mA 500 kHz XX512A1KAM8

18 mm Diameter – Nominal Sensing Range 5.98" (152 mm)

N.O. PNP/NPN 12-24 Vdc 4 pin Micro 100 mA 500 kHz XX518A1KAM12

30 mm Diameter – Nominal Sensing Range 3.2" (1 m)

N.O. PNP/NPN 12-24 Vdc 4 pin Micro 100 mA 200 kHz XX630A1KAM12

Operation

During set up and operation of the XX ultrasonic sensor continually and accurately measures the elapsed

time of every pulse echo reception after each pulse transmission. The transmitted pulse starts a clock to

the distance traveled to the object of surface and back to the sensor, using a D=TVs/2, D= Distance from

the sensor to the object; T = Elapsed time between the pulse transmission and its echo reception, Vs =

the Velocity of sound, approximately 1100 feet per second.

While the sensor is in operation, the calculated distance (D) between the sensor and the object is

compared to the distances associated with the fixed window limits. These limits are shown in the

illustration above as Dwi and Dwo. If D is within these limits, an output is generated. The output remains

on until the echo does not return or it returns from outside the window limits.

Normally open operation diagrams shown below for all the XX Ultrasonic ranges.

12 mm 18 mm

30 mm

Dimensions

8 mm x 1 mm

2.29 in.

58 mm

12 mm

0.47 in.

1.5 in.

38 mm

1.95 in.

50 mm

Sensing face

12 mm x 1 mm

12 mm

12mmx1mm

18 mm x 1 m

2.55 in.

65 mm

2.01 in.

51 mm

0.71 in.

18 mm

2.91 in.

74 mm

Sensing face

18 mm

1.11 in.

28 mm

1.37 in.

35 mm

M30 x 1.5 mm-6g

0.79 in.

20 mm

3.73 in.

95 mm 3.33 in.

85 mm

30 mm

thread

M12X1

thread

M18X1

thread

M30X1.5

SHADED AREA

REPRESENTS THE

FIXED SENSING

WINDOW

PULSE Dwo

Dwi

ECHO

OBJECT

Near Limit Far Limit

Orange LED is ON

when an object is

not sensed.

Amber LED is ON

when an object is

sensed Deadband

Amber

LED

Erratic operation

within this range

Sensing Field

ON OFF

V+

BLK

(sink)

WHT

(source)

V+

BLK

(sink)

WHT

(source)

OFF Orange

LED

Small objects are

best sensed about

38.1 mm (1.5")

Far Limit

50.8 mm (2.00")

Near Limit

6.3 mm (0.25")

6.4 mm

(0.25")

0.0 mm

(0.0")

Deadband

Amber

LED

Erratic operation

within this range

Fixed Sensing

Window

V+

BLK

(sink)

WHT

(source)

OFF OFF

V+

BLK

(sink)

WHT

(source)

V+

BLK

(sink)

WHT

(source)

Amber LED is ON

when an object is

within window

Green LED is ON

when power is

applied

Far Limit

152.4 mm

(6.00")

Near Limit

25.4 mm

(1.00")

19.1 mm

(0.75")

0.0 mm

(0.0")

Deadband

Erratic operation

within this range

Window

Sensing Range

Red

Green Off

Yellow

LED

Multicolor

LED

Setup

Pushbutton

Connector

Multicolor LED

Red

WHT

PNP

Red LED is On when

black-wire PNP is active

BLK

PNP

WHT

PNP

BLK

PNP

WHT

PNP

BLK

PNP

WHT

PNP

BLK

PNP

Black-wire PNP is N.O.

White-wire PNP is N.C.

V+ V+ V+

V+

990.6 mm

(39.00")

50.8 mm

(2.00")

0.0 mm

(0.0")

Ultrasonic Sensors

12, 18, and 30 mm Plastic Tubular

DC, AC/DC

371

Ultrasonic Sensors

Specifications

Mechanical

Diameter 12 mm 18 mm 30 mm

Nominal Sensing Range 2" (51 mm) 5.98" (152 mm) 3.21’ (1 m)

Sensing Zone 0.25 - 2.0" (6.4 - 50.8 mm) 1.0 - 6.0" (25.4 - 152.4 mm) 2.0 - 39.0" (51 - 991 mm)

Ultrasonic Cone Angle (see beam plots) 7 ° 10 °

Temperature Range - 4 to + 149 °F (- 20 to + 65 °C) + 32 to + 122 °F (0 to + 50 °C)

Humidity 100 %

Enclosure Rating IP67

Vibration 7 G @ 1 mm (F = 10 to 55 Hz)

Shock 30 G, 11 ms

Repeat Accuracy + / - 0.027" (0.7 mm) + / - 0.034" (0.87 mm)

Maximum Angular Deviation + / - 10 °

Minimum Size Detection 0.1" (2.5 mm) dia. rod

0.04" (1 mm) flat bar 0.06" (1.59 mm) dia. rod

Enclosure Material Case: plastic; Sensing Face: silicon rubber / except 0.47" (12 mm) glass epoxy

LED Indicators LED ring No LED Two LED’s

Electrical

Rated Supply Voltage 12 to 24 Vdc

Voltage Limits (including ripple) 10 to 28 Vdc

Maximum Load Current 100 mA

Voltage Drop; on-state 0.79 V PNP / 0.58 V NPN 0.75 V PNP / 0.67 V NPN 0.75 V PNP / 0.33 V NPN

Residual Current; open state 0.07 uA max. 0.05 uA max.

Current Consumption, no load 20 mA 60 mA 80 mA

Power Up Delay 20 ms 350 ms 720 ms

On / Off Delay 2 ms on / 2 ms off 3 ms on / 3 ms off 25 ms on / 25 ms off

Ultrasonic Frequency 500 kHz

Protection ESD Yes

Overvoltage Yes

Reverse Polarity Yes

Approvals CE

Beam Plots

The beam plots below, were developed from data collected at 20 °C and zero air flow, which defines the

boundaries and shape of the sonic beams shown for the XX ultrasonic sensor range. The boundaries

were established using a 10 cm x 10 cm target positioned parallel to the sensor face, moved in and out

of the sensors operating range.

12 mm 18 mm

30 mm

For additional cable options and lengths see p. 518

Connector Cables

(M8 or S suffix; M12 or D suffix)

XSZCS141 Nano Conn., 4 pin, 2 m, straight

XSZCS151 Nano Conn., 4 pin, 2 m, 90°

XSZCD101Y Micro Conn., 4 pin, 2 m, straight

XSZCD111Y Micro Conn., 4pin, 2 m, 90°

Wiring

Connector M8

12 mm

Connector M12

18 / 30 mm

3 (-)

1 (+)

4 NPN Output

2 PNP Output

43 3 (-)

1 (+)

4 NPN Output

2 PNP Output

BN/1

BU/3

–

BK/4

WH/2

PNP/NPN

010 40 60

-20

-10

0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

-0.5

-0.4

-0.3

-0.2

-0.1

-0.0

0.1

0.2

0.3

0.4

0.5

mm inches

inches

Deadband

20 30 50

0 5 10 15 20 25 30 35

-120

-80

-40

120

0123456789101112

-4

-3

-2

-1

in.

deadband

sonic pattern measured by moving a large flat surface into the beam

110

-400

-300

-200

-100

100

200

300

400

0 4 8 12 16 20 24 28 32 36 40

-10

-8

-6

-4

-2

inches

deadband

30 40 50 60 70 80 90 100

2010

Ultrasonic Sensors

Declaration of Conformity

372 10/02

Ultrasonic Sensors

MANUFACTURER’S DECLARATION OF CONFORMITY

ALL DISTRIBUTION OR REPRODUCTION WITHOUT WRITTEN AUTHORIZATION IS FORBIDDEN. Page 1 of 1

The undersigned, representing the manufacturer Document No: R-MDOC-XX5&6-R1

Company: SQUARE D COMPANY

address: 8001 HWY 64 East

Knightdale, NC 27545-9023

USA

Herewith declares that the product(s)

Product identification: XX512A1KAM8, 12mm cylindrical ultrasonic sensor

XX518A1KAM12, 18mm cylindrical ultrasonic sensor

XX630A1KAM12, 30mm cylindrical ultrasonic sensor

To which this declaration refers are in conformity with the following:

Standards

And/Or

Normative Documents:

Low Voltage Switchgear and Controlgear,

EN60947-1: General rules

EN60947-5-2: Proximity Switches

Subject to installation, maintenance and utilization in accordance with their purpose, regulations, current

standards, manufacturer‘s instructions and industry standards. Meet(s) the provisions of the following EC

Directive(s): (Including all applicable amendments)

reference n° title

73/23/CCE

89/336/CEE

Low-voltage Directive of February 19, 1973 modified by Directive 93/68/EC of July

22, 1993.

Electromagnetic Compatibility Directive of May 3, 1989 modified by Directives

92/31/CEE of April 28, 1992 and 93/68/CEE of July 22, 1993.

The CE marking on the product and/or the packaging signifies that the product is in compliance with the

applicable EU Directives .

Location Date Authorization Signature

Raleigh, NC February 13, 2002 Name: John Gawron

Position: Director, Industrial Control Activity

Signature: