SM30 Series 30 mm Barrel Sensor
Opposed-Mode Infrared Photoelectric Sensors for Especially Demanding Applications
Printed in USA Apr 2013 P/N 03541 Rev. E
• Stainless steel or plastic barrel models
• Very high excess gain; 150 m (500 ft) sensing range; 880 nm Infrared LED
• Positive sealing eliminates even capillary leakage; lens is quad-ring sealed; exceeds
NEMA 6P (IP67) ratings – ideal for equipment wash-down environments
• EZ-BEAM® technology provides reliable sensing without the need for adjustment
• Modulation frequency “A” is standard; frequencies “B” and “C” also available for
preventing crosstalk in multiple-sensor applications (emitter and opposed receiver
frequencies must match)
• AC- and DC-operated receiver models available; emitters feature Universal voltage
• Range for all models: 150 m (500 ft). See page 3 for performance curves.
* Any emitter and receiver shown here can be used together, if they have the same modulation frequency.
** Standard 2 m (6.5 ft) cable and integral QD models are listed. A model with a QD connector requires a mating cable; see page 4. To order the 9 m (30 ft) cable: add
suffix “W/30” following the Frequency suffix of any cable model (e.g., SM30PRLBW/30).
† AC models with QD require SM30CC model cables; see page 4.
Modulation Frequency* Housing Cable** Supply
Power Output Type
A B C
Emitter Models
SMA30PEL SMA30PELB SMA30PELC Plastic 2 m (6.5') 2-wire Cable
Universal:
12 to 240V ac,
10 to 30V dc
–
SMA30PELQD SMA30PELQDB SMA30PELQDC 3-pin Mini-style QD
†
SMA30SEL SMA30SELB SMA30SELC Stainless
Steel
2 m (6.5') 3-wire Cable
SMA30SELQD SMA30SELQDB SMA30SELQDC 3-pin Mini-style QD
†
DC Receivers
SM30PRL SM30PRLB SM30PRLC Plastic 2 m (6.5') 4-wire Cable
10 to 30V dc Bi-Modal™
NPN or PNP
SM30PRLQD SM30PRLQDB SM30PRLQDC 4-pin Mini-style QD
SM30SRL SM30SRLB SM30SRLC Stainless
Steel
2 m (6.5') 4-wire Cable
SM30SRLQD SM30SRLQDB SM30SRLQDC 4-pin Mini-style QD
AC Receivers
SM2A30PRL SM2A30PRLB SM2A30PRLC Plastic 2 m (6.5') 2-wire Cable
24 to 240V ac
SPST
Solid-state,
L.O.
SM2A30PRLQD SM2A30PRLQDB SM2A30PRLQDC 3-pin Mini-style QD
†
SM2A30SRL SM2A30SRLB SM2A30SRLC Stainless
Steel
2 m (6.5') 3-wire Cable
SM2A30SRLQD SM2A30SRLQDB SM2A30SRLQDC 3-pin Mini-style QD
†
SM2A30PRLNC SM2A30PRLNCB SM2A30PRLNCC Plastic 2 m (6.5') 2-wire Cable
SPST
Solid-state,
D.O.
SM2A30PRLNCQD SM2A30PRLNCQDB SM2A30PRLNCQDC 3-pin Mini-style QD
†
SM2A30SRLNC SM2A30SRLNCB SM2A30SRLNCC Stainless
Steel
2 m (6.5') 3-wire Cable
SM2A30SRLNCQD SM2A30SRLNCQDB SM2A30SRLNCQDC 3-pin Mini-style QD
†
WARNING . . . Not To Be Used for Personnel Protection
Never use these products for personnel protection. Doing so could lead to serious injury or death. These devices do NOT include the self-checking redundant circuitry
necessary to allow their use in personnel safety applications. A device failure or malfunction can cause either an energized or de-energized output condition. Consult your
current Banner Safety Products catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: 763.544.3164
2 P/N 03541 Rev. E
SM30 Series 30 mm Barrel Sensor
Supply Voltage and Current Emitters: 12 to 240V ac (50/60 Hz) or 10-30V dc at 20 mA, 10% maximum ripple
DC Receivers: 10 to 30V dc at 10 mA maximum (exclusive of load); 10% maximum ripple
AC Receivers: 24 to 240V ac (50/60 Hz)
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration DC Receivers: Bi-Modal™ output (PNP sourcing or NPN sinking). Selection of light/dark operate and sourcing or
sinking configuration dependent on hookup.
AC Receivers: SPST solid-state switch; light operate (LO) or dark operate (DO) dependent on model.
Output Rating DC Receivers: 250 mA continuous
Output saturation voltage (PNP & NPN configuration) < 1 volt at 10 mA and < 2 volts at 250 mA
Off-state leakage current < 10 microamps
AC Receivers: Maximum steady-state load capability is 500 mA
Inrush capability: 10 amps for 1 second (non-repeating)
Off-state leakage: current < 1.7 mA rms
On-state voltage drop: < 3.5 volts rms across a 500 mA load; < 5 volts rms across a 15 mA load
Output Protection Circuitry Outputs of dc receivers are short circuit protected
Output Response Time 10 milliseconds on/off
Repeatability “A” frequency models: 1 ms
“B” frequency models: 1.5 ms
“C” frequency models: 2.3 ms
Indicators Internal red LED, visible through the lens or from side of the sensor.
Emitters: Red “Power ON” indicator LED
DC Receivers: Lights whenever receiver sees its modulated light source
AC Receivers: Lights whenever receiver’s output is conducting
Construction Fully epoxy-encapsulated tubular threaded housing, positive sealed at both ends, quad-ring sealed acrylic lens.
Plastic models: 30 mm diameter thermoplastic polyester housing and jam nuts.
Stainless Steel models: 30 mm diameter 303 stainless steel housing and jam nuts.
Environmental Rating Exceeds NEMA 6P and IEC IP67 standards
Connections PVC-jacketed 2 m or 9 m cables or Mini-style quick-disconnect (QD) fitting are available. QD cables are ordered
separately. See page 4.
Operating Conditions Temperature: -40° to +70° C (-40° to +158° F)
Relative humidity: 90% at 50° C (non-condensing)
Certifications
Specifications
Dimensions
Cabled Models QD Models
Jam Nuts
(2 Provided)
Alignment
Indicator (Receivers)
M30 x 1.5
Thread
102 mm
(4.0")
Jam Nuts
(2 Provided)
Alignment
Indicator (Receivers)
M30 x 1.5
Thread
114 mm
(4.5")
P/N 03541 Rev. E 3
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: 763.544.3164
SM30 Series 30 mm Barrel Sensor
Performance Curves
Hookups
NOTE: AC emitters are not polarity-sensitive when powered by dc voltage. For QD
emitters, use SM30CC model cables listed on page 4 in order to match cable
colors.
*Connect green wire to earth ground whenever a stainless steel model is powered by ac voltage. (Cabled plastic models have no green wire.)
DC Receivers – NPN
Excess Gain Curve Beam Pattern
Emitters – QDEmitters – Cabled AC Receivers – Cabled
DC Receivers – PNP
AC Receivers – QD
NOTE: Where QD hookups only are shown, cabled model hookups are functionally identical.
Light Operate Light OperateDark Operate Dark Operate
bn
bu
gn*
NOTE: The green wire must be connected to
earth ground whenever a model with a stainless
steel housing is powered by ac voltage
10-30V dc or
12-240V ac 10-30V dc or
12-240V ac
rd/bk
rd/wh
gn*
bn
bu 24-240V ac
Load
gn*
NOTE: The green wire must be connected to
earth ground whenever a model with a stainless
steel housing is powered by ac voltage
24-240V ac
rd/bk
Load
rd/wh
gn*
NOTE: The green wire must be connected to
earth ground whenever a model with a stainless
steel housing is powered by ac voltage
10-30V dc
–
+
bu
bn
bk Load
wh
10-30V dc
–
+
bu
bn
bk Load
wh
10-30V dc
–
+
bu
bn
bk Load
wh
10-30V dc
–
+
bu
bn
bk Load
wh
1
10
100
10 m
33 ft
100 m
330 ft
1000 m
3300 ft
1 m
3.3 ft
1000
10000
100000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SM30 Series
Opposed Mode
225 m
750 ft
180 m
600 ft
135 m
450 ft
90 m
300 ft
45 m
150 ft
0
0
500 mm
1000 mm
1500 mm
500 mm
1000 mm
1500 mm
0
20 in
40 in
60 in
20 in
40 in
60 in
DISTANCE
SM30 Series
Opposed Mode
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
SM30 Series 30 mm Barrel Sensor
P/N 03541 Rev. E
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will
repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This
warranty does not cover damage or liability for misuse, abuse, or the improper application of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE
TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE,
TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp.
Quick-Disconnect (QD) Cables
Style Model Length Connector Use with Pinout
3-pin Mini-Style SM30CC-306
SM30CC-312
2 m (6.5')
4 m (12')
Straight
Emitters and
AC receivers
Green
Red/White Red/Black
Male Pinout
4-pin Mini-Style
MBCC-406
MBCC-412
MBCC-430
2 m (6.5')
4 m (12')
9 m (30')
DC receivers
White Black
Blue
Brown
Male Pinout
SMB30A • 30 mm, 12-gauge, stainless steel, right-angle bracket with a curved mounting slot for versatile orientation
• Clearance for M6 (1/4") hardware
SMB30C
• 30 mm split clamp bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting hardware
SMB30MM • 30 mm, 12-gauge, stainless steel, right-angle bracket with curved mounting slots for versatile orientation
• Clearance for M6 (1/4") hardware
SMB30SC
• 30 mm swivel bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting and swivel locking hardware
Mounting Brackets
Apertures
Model Description
APG30S
Kit includes: a thread-on stainless steel housing, a flat
glass lens, two quad-ring seals, plus 3 round and 3
slotted aperture disks
