CPC1540 Single-Pole, Normally Open OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Load Voltage Load Current On-Resistance (max) Input Control Current Rating 350 120 25 2 with Integrated Current Limit and Thermal Shutdown Units VP mArms / mADC mA Features * * * * * * * Integrated Active Current-Limit Protection Thermal Shutdown Guaranteed Turn-On: 2mA Input Control Current 350VP Blocking Voltage 3750Vrms Input/Output Isolation Small Surface Mount Package Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable Applications * * * * * * * * * * * * Telphony hook switch VoIP gateways, such as VoIP IP-PBXs Satellite and cable set-top boxes V.92 (and other standard) modems Fax machines Voicemail systems Embedded modems for POS terminals, automated banking, remote metering, vending machines, security, and surveillance Instrumentation Medical equipment--Patient/equipment isolation Aerospace Industrial controls AC/DC Configuration - Control Do Not Use The CPC1540 is a normally open (1-Form-A) Solid State Relay with an integrated current limit feature that can replace electromechanical relays while enhancing the robustness of wireline-interface applications. Designed specifically to target the hook switch telephony market, the CPC1540 has a load voltage rating of 350V. The relay is constructed using a GaAIAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, comprises a photodiode array, switch control with active current limiting circuitry, and MOSFET switches. Active current-limit circuitry in the CPC1540 provides a thermal shutdown feature, offering excellent power-cross immunity for improved survivability in harsh environments. These enhancements greatly improve the robustness of end systems using this device compared to systems using relays without the integrated current limit. In addition, the active current limit circuitry enables the CPC1540 to pass FCC 68.302 and other regulatory voltage surge requirements when adequate overvoltage protection is provided. The CPC1540 relay may be used in both AC and DC applications. Approvals * UL Certified Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN/IEC 60950-1 Certified Component: TUV Certificate: B 10 05 49410 006 Ordering Information Pin Configuration + Control Description 1 6 2 5 3 4 Load Do Not Use Part # CPC1540G CPC1540GS CPC1540GSTR Load Switching Characteristics of Normally Open Devices DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount, Tape & Reel (1000/Reel) + Load Form-A - Load IF 90% Pb DS-CPC1540-R03 e3 10% ILOAD ton www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1540 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output (60 Seconds) Operational Temperature Storage Temperature 1 2 Ratings Units 350 VP 5 V 50 mA 1 A 150 mW 800 mW 3750 Vrms -40 to +85 C -40 to +125 C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 3.33 mW / C Derate linearly 6.67 mW / C Recommended Operating Conditions Parameter Load Current, Continuous Input Control Current Operating Temperature Symbol Configuration AC/DC DC-Only - IL IF - Min 3 -40 Nominal 5 - Max 120 250 10 +85 Units mArms / mADC mADC mA C Electrical Characteristics @ 25C Parameter Output Characteristics Current Limit AC/DC Configuration DC Configuration On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate LED Forward Voltage Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max Units IF=5mA, VL=13V, t=5ms IF=5mA, VL=6.5V, t=5ms ILMT 190 360 225 430 285 570 mA 12 3 - 18.2 4.2 - 25 6.75 1 A IF=5mA, IL=120mA IF=5mA, IL=220mA VL=350V RON ILEAK IF=5mA, IL=100mA ton toff - 0.72 0.3 2 ms IF=0mA, VL=20V CO - 14 - pF IL=100mA IL<1A IF=5mA IF IF VF 0.2 0.9 0.8 0.6 1.24 2 1.4 mA mA V VIN = -5V IR - - 10 A - CI/O - 0.5 - pF www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC1540 PERFORMANCE DATA (@25C Unless Otherwise Noted)* Typical Turn-On Time vs. LED Forward Current (IL=100mA) Typical LED Forward Voltage Drop vs. Temperature 4.5 1.3 1.2 1.1 3.0 TA=85C TA=25C TA=-40C 2.5 2.0 1.5 1.0 TA=25C 0.3 TA=-40C 0.2 0.1 0.5 0.0 -40 -20 0 20 40 60 Temperature (C) 80 100 0.0 0 Typical IF for Switch Operation vs. Temperature (IL=100mA) 1.0 2 4 6 8 LED Forward Current (mA) 10 0 Typical Turn-On Time vs. Temperature (IF=5mA, IL=100mA) 1.4 0.6 0.4 0.2 Turn-Off Time (ms) 0.8 1.0 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 Temperature (C) 80 -40 100 On-Resistance vs. Temperature (IF=5mA, IL=100mA) 25 -20 0 20 40 60 Temperature (C) 80 5 -40 -20 0 20 40 60 Temperature (C) 80 100 18.22 18.20 18.18 18.16 -40 -20 0 20 40 60 Temperature (C) 80 100 Typical Leakage Current vs. Temperature (IF=5mA, IL=100mA, VL=350V) 16 14 12 10 8 6 4 2 0 2 4 6 8 LED Forward Current (mA) Output Capacitance vs. Applied Voltage (IF=0mA, f=1MHz) 100 0.20 18 18.14 0 0.25 Leakage Current (nA) On-Resistance (:) 10 0.30 100 18.24 15 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=100mA) 0.35 On-Resistance vs. LED Current (IL=100mA, TA=25C) 18.26 20 10 0.15 0.0 0.0 2 4 6 8 LED Forward Current (mA) 0.40 1.2 Turn-On Time (ms) LED Forward Current (mA) 3.5 TA=85C 0.4 Turn-Off Time (ms) 1.4 1.0 On-Resistance (:) 0.5 4.0 Turn-On Time (ms) LED Forward Voltage (V) 1.5 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 10 -40 -20 0 20 40 60 Temperature (C) 80 100 Current Limit vs. Temperature (IF=5mA) 300 80 Current Limit (mA) Capacitance (pF) 90 70 60 50 40 30 250 200 20 10 150 0 5 10 15 Applied Voltage (V) 20 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1540 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1540G / CPC1540GS MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1540G / CPC1540GS 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 4 e3 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC1540 MECHANICAL DIMENSIONS CPC1540G 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) CPC1540GS 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) R03 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1540 MECHANICAL DIMENSIONS CPC1540GSTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1540-R03 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012