EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High performance SMD LED with Reflector 93-22SDRSYGC/S530-A3/TR8 Features Package in 12mm tape on 7" diameter reels. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA std. package. IC compatible. Pb-free. The product itself will remain within RoHS compliant version. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Indicator and backlight for audio and video equipment. Indicator and backlight for battery driven equipment. Small indicator for outdoor applications. Indicator and backlight in office equipment. Flat backlight for LED, switches and symbol. General use. Device Selection Guide Chip Type Material Emitted Color SDR AlGaInP Dark Red Lens Color Water Clear SYG AlGaInP Brilliant Yellow Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 1 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Package Dimensions SDR SYG For reflow soldering (propose) Note: The tolerances unless mentioned is 0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 2 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Absolute Maximum Ratings @Ta=25 Parameter Symbol Rating Unit Reverse Voltage VR 5 V 25 mA Forward Current SDR IF SYG Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +100 ESD 2000 V 60 mW 60 mA Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current (Duty 1/10 @ 1KHz) Soldering Temperature SDR Pd SYG SDR IFP SYG Tsol Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 3 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Electro-Optical Characteristics @ Ta=25 Parameter Symbol Luminous Intensity IV Peak Wavelength p Dominant Wavelength d Spectrum Radiation Bandwidth Forward Voltage VF Min. Typ. Max. SDR 17 41 ----- SYG 11 17 ----- SDR ----- 650 ----- SYG ----- 575 ----- SDR ----- 639 ----- SYG ----- 573 ----- SDR ----- 20 ----- SYG ----- 20 ----- SDR ----- 2.0 2.4 SYG ----- 2.0 2.4 Unit Condition mcd IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA Viewing Angle 21/2 ----- 130 ----- deg IF=20mA Reverse Current IR ----- ----- 10 A VR=5V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 4 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Typical Electro-Optical Characteristics Curves(SDR) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 5 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Typical Electro-Optical Characteristics Curves(SYG) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 6 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 7 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Carrier Tape Dimensions: Loaded quantity per reel 1000 PCS/reel Note: Tolerances Unless Dimension 0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Desiccant Rev. 1 Label Page: 8 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5 sec. Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 6 Min. Rev. 1 Page: 9 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 10 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 93-22SDRSYGC/S530-A3/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-932-034 prepared date: 19-Aug-2005 Rev. 1 Page: 11 of 11 Prepared by: Venis Wu