Lighting Catalog
Outshines the competition
SECONDARY HEADLINE
FLUSH LEFT AND PLACED HERE
Honeywell Halogen Lamps
Borosilicate
glass lens resists
cracking and warpage,
and prevents
distortion and lens
discoloration.
Sealed beam
construction
assures maximum
light output by preventing
contamination
over the life
of the lamp.
Rust resistant
heavy-duty
mounting
hardware.
High-impact
polypropylene
lamp housing.
Simplified
installation -
only one hole
required for
mounting.
Honeywell offers a full line of heavy-duty
halogen off-highway vehicular lamps to
keep equipment moving long after the
sun has set. Because they are designed
for use with agricultural, industrial and
construction equipment, they can
withstand shock, vibration and other
extreme service conditions. Our time-
proven halogen sealed beam lamps
have earned the reputation as one of the
most reliable, heavy duty lighting
products made.
Rectangular Halogen Lamp
4 X 6 RECTANGULAR LAMP
Part # Beam Pattern Voltage/Wattage Current Replacement Beam Part #
71898-50 Wide Flood 12 Vdc, 50 Watts 4 Amp 71017-50
74001-50 Narrow Flood 12 Vdc, 50 Watts 4 Amp 71791-50
71915-50 Trap 12 Vdc, 50 Watts 4 Amp 71792-50
71902-50 Spot 12 Vdc, 50 Watts 4 Amp 71794-50
75237-50 HI-LO Driving 12 Vdc, 35/60 Watts 3/5 Amp 75251-50
72540-50 Wide Flood 24 Vdc, 60 Watts 2.5 Amp 72541-50
75109-50 Narrow Flood 24 Vdc, 60 Watts 2.5 Amp 78856-50
72542-50 Trap 24 Vdc, 60 Watts 2.5 Amp 72543-50
72544-50 Spot 24 Vdc, 60 Watts 2.5 Amp 72545-50
4 X 6 BLUEBRIGHT LAMP
Part # Beam Pattern Voltage/Wattage Current Replacement Beam Part #
87022-22 Flood 12 Vdc, 65 Watts 5.4 Amp 87029-52
87024-22 Trap 12 Vdc, 65 Watts 5.4 Amp 87030-52
87023-22 Spot 12 Vdc, 65 Watts 5.4 Amp 87031-52
3 X 5 RECTANGULAR LAMP
Part # Beam Pattern Voltage/Wattage Current Replacement Beam Part #
73761-50 Wide Flood 12 Vdc, 50 Watts 4 Amp 72408-50
77861-49 Wide Flood w/switch 12 Vdc, 50 Watts 4 Amp 72408-50
73762-50 Narrow Flood 12 Vdc, 50 Watts 4 Amp 72573-50
73763-50 Trap 12 Vdc, 50 Watts 4 Amp 72801-50
73764-50 Spot 12 Vdc, 50 Watts 4 Amp 73804-50
PAR 36 ROUND LAMP
Part # Beam Pattern Voltage/Wattage Current Replacement Beam Part #
73468-50 Wide Flood 12 Vdc, 50 Watts 4 Amp 70510-50*
73469-50 Trap 12 Vdc, 50 Watts 4 Amp 70729-50*
*Honeywell PAR 36 Round Halogen Sealed Beam will replace any 4.5” incandescent or halogen sealed beam
HIGH INTENSITY DISCHARGE
Nominal Voltage 12 Vdc 24 Vdc
Operating Voltage 9-16 Vdc 10-32 Vdc
Startup Amperage 15 Amps @ 9 Vdc 8 Amps @ 14 Vdc
9 Amps @ 16 Vdc 5 Amps @ 32 Vdc
Stabilized Amperage 5 Amps @ 9 Vdc 3.3 Amps @ 14 Vdc
2.7 Amps @ 16 Vdc 1.4 Amps @ 32 Vdc
Startup Time 0.1 to 5 seconds 0.1 to 5 seconds
Part # Beam Pattern Voltage
84760-50 Flood 12 Vdc
88216-50 Trap 12 Vdc
88217-50 Spot 12 Vdc
88735-50 Flood 24 Vdc
88913-50 Trap 24 Vdc
PORTABLE WORK LAMP
Part # Product Beam Pattern Voltage Current Replacement Beam Part #
80508-05 3x5 lamp w/ handle Flood 12 Vdc 4 Amp 72408-50
80509-05 3x5 lamp w/ handle Spot 12 Vdc 4 Amp 73804-50
80413-10 3x5 lamp w/ handle & switch Flood 12 Vdc 4 Amp 72408-50
80510-10 3x5 lamp w/ handle & switch Spot 12 Vdc 4 Amp 73804-50
FLEXBASE WARNING LAMP
Part # Voltage Current Replacement Bulb Part #
85591-50 12 Vdc 2 Amps 1156 (obtain locally)
Portable Work Lamp
Need temporary lighting? The Honeywell Portable Work Lamp is the answer.
This heavy-duty work lamp provides light for any situation. Use it for work, to
replace failed equipment lighting, light dark work areas, or service
equipment. Use it for recreation–take it hunting, fishing or camping.
Whatever the application, the Honeywell Portable Work Lamp will provide
years of reliable service. Simply plug the 15-foot cord into a 12 Vdc
cigarette lighter receptacle, place the base with built-in 80 lb. magnet on a
suitable metal surface, and get to work.
Flexbase Warning Lamp
Here’s the answer to those pesky tree branches or corn stalks. The
Honeywell FlexBase Warning Lamp will bend a full 90° when struck. This
flex action deflects the impact, providing optimum protection to the lamp
and the surface it’s mounted on. The Honeywell FlexBase Warning Lamp
meets SAE J974 requirements for light output, and features high-impact
polycarbonate lenses, aircraft-quality springs and cables, and an easily
replaceable bulb. This lamp is made to replace fixed lamps on agricultural,
industrial, and construction equipment.
Honeywell Hour Meters
Do you need to keep track of maintenance hours on your
equipment? Honeywell has the solution, a new line of
economy meters. Contact Honeywell at 217-753-7798 for
dealers in your area.
Hour Meter Part No. 82450 Hour Meter Part No. 82451 Hour Meter Part No. 82452 Hour Meter Part No. 82453
4.45 in
5.12 in
3.5 in
6 in
4.75 in
80 lb
Magnet
15 ft
Power
Cord
Beam Patterns, Tests & Applications
Test Typical Imported Honeywell
Will-fit Competitor (Made In the USA)
96 hour salt spray Bracket and bolt rusted. UNAFFECTED!
per astm b117-73 Inside of lamp fogged
Water immersion Within one minute filled UNAFFECTED!
(5 minute soak with water, rusted
in each of two axes) and corroded
High pressure spray Inside of lamp UNAFFECTED!
(1200 psi for filled with cleaner
one minute, 45º
above and below
horizontal axis)
Dust chamber Dust inside of lamp UNAFFECTED!
(24 hours of
Arizona coarse dust)
450 hour vibration Bracket replaced twice UNAFFECTED!
(5 g’s peak) due to breakage.
Failures also include
burnout at ≤300 hours
14 Vdc steady burn, 360 average hours 940 average
average life of 6 hours
test samples
Standard Beam Patterns Outshines the Competition in Six Standard Tests
Types of Applications
Trap driving
or
implement
lamp
Flood
illuminate
combine
head
Flood
general
illumination
Trap
driving
lamp
Flood
illuminate
loader
bucket
Flood
illuminate
backhoe
bucket
Trap
or Hi-Lo
driving
lamp
Spot row
marker
Flood
work or
implement
lamp
Combine Backhoe Tractor
Flood
50 ft x 30 ft
Trap
25 ft x 100 ft
Spot
1000 ft
4X6 Rectangular Lamp
The Honeywell 4 x 6 Rectangular Lamp can be added to any heavy-duty
equipment to assist in lighting problem areas. The lamp is available in 12
Vdc or 24 Vdc with several different beam patterns.
4X6 BlueBright
The BlueBright from Honeywell offers the new, blue-coating technology
which improves visibility in low light conditions. It produces over 15% more
light output as compared to a conventional halogen. The BlueBright can be
used in any application where the 4 x 6 Halogen would be used.
3X5 Rectangular Lamp
The Honeywell 3 x 5 Rectangular Lamp is a smaller version of the 4 x 6
lamp but still offers the same features. For practical use on smaller
construction or farm equipment.
4.49 in
6.90 in
4.49 in
6.90 in
3.53 in
5.89 in
Also available
with on/off switch
PAR 36 Round Lamp
Honeywell PAR 36 Halogen Work Lamps are well suited for more traditional
agricultural equipment applications. They are virtually the same 4.5 inch
diameter lamps that have been factory-installed on popular makes of
combines and tractors over the years. In fact, Honeywell PAR 36
Replacement Sealed Beams are the perfect choice as heavy-duty
replacements for cab and fender mounted lamps used in that equipment.
High Intensity Discharge Lamps
Honeywells’ High Intensity Discharge Lamps (Xenon) are designed to hold
up to the extreme demands of off-highway construction and agricultural
equipment. HID is significantly more efficient than halogen and produces
more light with less amperage draw. Compared to the average halogen
lamp, Honeywells’ HID lamps provide four times the light output. The
technology allows equipment to operate safer with less load on the
electrical system resulting in optimum alternator and battery life.
Honeywell HID features an internal electronic bulb/igniter/ballast system for
maximum component protection and simplified installation. Simply bolt on,
connect wires, and go.
• Compact Size: 5 in x 5 in x 6 in
• 5000 hour life, up to 6 times greater life expectancy than a
comparable halogen
• Completely sealed from moisture and dirt
• Direct replacement for most add-on incandescent
and halogen lamps
• Isolation mounted to withstand vibration
5.25 in
5.25 in
5 in
6 in 5 in
HID Operating Principal
No Filament
Electrical Discharge (Plasma)
Between Electrodes Creates Light
Micro-Environment of Xenon Gas,
Mercury, & Metal Halide Salts
AFT100474-EN
December 2004
© 2004 Honeywell International Inc.
Find out more
For more information...
Sensing and Control
Honeywell
P.O. Box 19424
Springfield, IL 62794-9424
USA
www.honeywell.com
Warranty/Remedy
Honeywell warrants goods of its manufacture
as being free of defective materials and
faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to
otherwise by Honeywell in writing; please
refer to your order acknowledgement or
consult your local sales office for specific
warranty details. If warranted goods are
returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at
its option, without charge those items it finds
defective. The foregoing is buyer’s sole
remedy and is in lieu of all warranties,
expressed or implied, including those of
merchantability and fitness for a particular
purpose. In no event shall Honeywell be
liable for consequential, special, or
indirect damages.
While we provide application assistance
personally, through our literature and the
Honeywell web site, it is up to the customer
to determine the suitability of the product in
the application.
Specifications may change without notice.
The information we supply is believed to be
accurate and reliable as of this printing.
However, we assume no responsibility for its
use.
Sales and Service
Honeywell serves its customers through a
worldwide network of sales offices and
distributors. For application assistance,
current specifications, pricing or name of the
nearest Authorized Distributor, contact your
local sales office or: INTERNET:
www.honeywell.com/sensing
E-mail: info.sc@honeywell.com
For Hobbs Aftermarket Lighting products
contact us at
Tel: (217) 753-7798
Internet: www.honeywell.com/hobbs
