▲
97 Series
15
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
All dimensions in inches (millimeters in parenthesis)
Accessories
MS3057-A Cable Clamp
MS3057-C Waterproof Cable Clamp
Standard MS3057 cable clamps have a dual clamping action to provide a balanced,
positive hold on the wires and greatly reduce moisture transmission. This cable clamp
accepts MS3420 bushings. MS3420 bushings can be nested to reduce the inside
diameter to more closely match the diameter of the cable or wire bundle.
Standard MS3057-C waterproof cable clamp with
mechanical strain relief for use with threaded
endbells. Internal neoprene gland and compression
ring will seal a broad range of round cable diameters
as listed below. For reduction of cable diameters,
order the appropriate MS3420A bushing in table.
NEOPRENE
SEALING
GLAND
METAL
COMPRESSION
DISC
CABLE
CLAMP
SHELL WIRE DIAMETER INCHES (mm) OPTIONAL BUSHINGS
SIZE PART NUMBER MAX. MIN. PART NUMBER MAX. WIRE DIA. (mm)
10SL MS3057-4C .312 (7.93) .188 (4.80) MS3420-4A .219 (5.56)
14S MS3057-6C .438 (11.12) .281 (7.10) MS3420-6A .312 (7.93)
MS3420-4A .219 (5.56)
16/16S MS3057-8C .530 (13.48) .312 (7.90) MS3420-8A .438 (11.10)
MS3420-6A .312 (7.93)
18 MS3057-10C .625 (15.87) .375 (9.50) MS3420-10A .438 (11.10)
MS3420-6A .312 (7.93)
20/22 MS3057-12C .750 (19.00) .500 (12.70) MS3420-12A .540 (13.74)
MS3420-8A .438 (11.10)
24/28 MS3057-16C .940 (23.80) .625 (15.90) MS3420-16A .750 (19.00)
MS3420-12A .540 (13.74)
MS3420-8A .438 (11.10)
32 MS3057-20C 1.25 (31.75) - MS3420-20A .938 (23.80)
MS3420-16A .750 (19.00)
MS3420-12A .540 (13.74)
36 MS3057-24C 1.38 (35.00) 1.00 (25.40) MS3420-24A 1.12 (28.50)
MS3420-18A .938 (23.80)
MS3420-16A .750 (19.00)
40 MS3057-28C 1.62 (41.25) 1.25 (31.80) MS3420-28A 1.25 (31.75)
MS3420-20A .940 (23.80)
MS3420-16A .750 (19.00)
STANDARD CLAMP
ALUMINUM W/ MAXIMUM
SHELL THREAD LOW COST ALUMINUM W/ STAINLESS STEEL CABLE DIAMETER
SIZE 2B CAST ZINC BRASS SCREWS SCREWS INCH (mm)
8S 1/2-24UNEF 97-3057-1003 MS3057-3A M85049/41-3A .220 (5.58)
10S/10SL 5/8-24UNEF 97-3057-1004 MS3057-4A M85049/41-4A .312 (7.92)
12/12S/12SL 5/8-24UNEF 97-3057-1004 MS3057-4A M85049/41-4A .312 (7.92)
14/14S 3/4-20UNEF 97-3057-1007 MS3057-6A M85049/41-6A .438 (11.13)
16/16S 7/8-20UNEF 97-3057-1008 MS3057-8A M85049/41-8A .562 (14.27)
18 1-20UNEF 97-3057-1010 MS3057-10A M85049/41-10A .625 (15.88)
20/22 1 3/16-18UNEF 97-3057-1012 MS3057-12A M85049/41-12A .750 (19.0)
24/28 1 7/16-18UNEF 97-3057-1016 MS3057-16A M85049/41-16A .938 (23.83)
32 1 3/4-18UNS 97-3057-1020 MS3057-20A M85049/41-20A 1.250 (31.75)
36 2-18UNS 97-3057-1024 MS3057-24A M85049/41-24A 1.375 (34.92)
40 2 1/4UNS-16 - MS3057-28A M85049/41-28A 1.625 (41.28)
STANDARD CLAMP AND TELESCOPIC BUSHING
LOW COST
ZINC WITH BUSHING BUSHING ID
BUSHING INCLUDED INCH (mm)
97-3057-1003-1 MS3420-3 0.130 (3.3)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1007-1 MS3420-6 0.312 (7.9)
97-3057-1008-1 MS3420-8 0.437 (11.1)
97-3057-1010-1 MS3420-10 0.562 (14.3)
97-3057-1012-1 MS3420-12 0.625 (15.9)
97-3057-1016-1 MS3420-16, -12 0.625 (15.9)
97-3057-1020-1 MS3420-20, -16 0.750 (19.0)
97-3057-1024-1 MS3420-24, -20 0.937 (23.8)
- - - -
▲
97 Series
16
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
SHELL SIZE INCHES (mm) (mm)
INCHES
CABLE CLAMP
PART NUMBER
MAX. CABLE OUTSIDE DIAMETER MIN. CABLE OUTSIDE DIAMETER THREAD
CLASS 2B
UNEF
10SL, 12S 9767-12-4 0.219 (5.55) 0.020 (0.51) 5/8-24
14S 9767-14-4 0.219 (5.55) 0.020 (0.51) 3/4-20
14S 9767-14-6 0.344 (8.73) 0.176 (4.47) 3/4-20
16S, 16 9767-16-4 0.219 (5.55) 0.020 (0.51) 7/8-20
16S, 16 9767-16-6 0.344 (8.73) 0.176 (4.47) 7/8-20
16S, 16 9767-16-8 0.438 (11.12) 0.177 (4.50) 7/8-20
18 9767-18-6 0.344 (8.73) 0.176 (4.47) 1-20
18 9767-18-8 0.438 (11.12) 0.177 (4.50) 1-20
18 9767-18-10 0.563 (14.29) 0.292 (7.42) 1-20
20, 22 9767-22-8 0.438 (11.12) 0.177 (4.50) 1-3/16-18
20, 22 9767-22-10 0.563 (14.29) 0.292 (7.42) 1-3/16-18
20, 22 9767-22-12 0.688 (17.46) 0.370 (9.40) 1-3/16-18
24, 28 9767-28-10 0.563 (14.29) 0.292 (7.42) 1-7/16-18
24, 28 9767-28-12 0.688 (17.46) 0.370 (9.40) 1-7/16-18
24, 28 9767-28-16 0.844 (21.43) 0.536 (13.61) 1-7/16-18
32 9767-32-20 1.031 (26.19) 0.590 (14.99) 1-3/4-18
36 9767-36-16 0.844 (21.43) 0.536 (13.61) 2-18
Accessories
9767 Cable Clamps
SHELL
SIZE
FITS IN
CABLE CLAMP
INSIDE
DIAMETER
INSIDE
DIAMETER
1ST BUSHING
PART NUMBER
2ND NESTED
BUSHING
10S/10SL MS3420-4 .220 (5.59) NONE - MS3057-4A
12/12S MS3420-4 .220 (5.59) NONE - MS3057-4A
14/14S MS3420-6 .312 (7.92) NONE - MS3057-6A
16S MS3420-8 .437 (11.10) NONE - MS3057-8A
16 MS3420-8 .437 (11.10) NONE - MS3057-8A
18 MS3420-10 .562 (14.30) NONE - MS3057-10A
20 MS3420-12 .625 (15.90) NONE - MS3057-12A
22 MS3420-12 .625 (15.90) NONE - MS3057-12A
24 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A
28 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A
32 MS3420-20 .937 (23.80) MS3420-16 .750 (19.05) MS3057-20A
36 MS3420-24 1.250 (31.75) MS3420-20 .937 (23.80) MS3057-24A
40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4
For use with Style A cable clamps and AIT/MS Style E/F endbells to eliminate
dust, dirt, and oil from entering the cable clamp. Bushings can be nested, one
inside the other, to reduce the inside diameter to better seal against the cable
jacket. Each bushing will accept the next smallest bushing.
MS3420 Telescoping Bushings
9767 waterproof cable clamp with mechanical strain relief. An
internal neoprene gland seal bushing and compression washer
will seal a broad range of round cable diameters as listed below.
For use with MS3057-C cable clamps (Style C) to reduce the wire sealing
diameter. Bushings can be nested, one inside the other, to progressively
reduce the inside diameter of the cable clamp. The column labeled
"reduction bushings" shows the acceptable nesting options for each clamp.
Call for information.
MS3420-A Reduction Bushings
All dimensions in inches (millimeters in parenthesis)
▲
97 Series
17
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
Metal dust caps are used to protect the contacts when the connectors are left unmated.
Dust caps come with metal chain lanyards.
Dummy receptacles are for front or rear panel mounting. The center of the dummy
receptacle is closed. Dummy receptacles mount on the same centers and have the same
outside dimensions as a 97-3102A receptacle. A version with a clearance hole through the
middle of the connector is also available. Call for ordering information.
Accessories
Gaskets
LOW TEMPERATURE
CONDUCTIVE
SHELL SIZE NON-CONDUCTIVE
8S 10-040450-008 10-040450-08S 10-036675-008
10S/10SL 10-040450-010 10-040450-10S 10-036675-010
12/12S 10-040450-012 10-040450-12S 10-036675-012
14/14S 10-040450-014 10-040450-14S 10-036675-014
16S 10-040450-016 10-040450-16S 10-036675-016
16 10-040450-016 10-040450-16S 10-036675-016
18 10-040450-018 10-040450-18S 10-036675-018
20 10-040450-020 10-040450-20S 10-036675-020
22 10-040450-022 10-040450-22S 10-036675-022
24 10-040450-024 10-040450-24S 10-036675-024
28 10-040450-028 10-040450-28S 10-036675-028
32 10-040450-032 10-040450-32S 10-036675-032
36 10-040450-036 10-040450-36S 10-036675-036
40 10-040450-040 10-040450-40S 10-036675-040
Metal Dust Caps With Sash Chain & Dummy Receptacles
8S MS25042-8DA MS25043-8DA MS3105-8
10S/10SL MS25042-10DA MS25043-10DA MS3105-10
12/12S/12SL MS25042-12DA MS25043-12DA MS3105-12
14/14S MS25042-14DA MS25043-14DA MS3105-14
16S MS25042-16DA MS25043-16DA MS3105-16
16 MS25042-17DA MS25043-17DA MS3105-17
18 MS25042-18DA MS25043-18DA MS3105-18
20 MS25042-20DA MS25043-20DA MS3105-20
22 MS25042-22DA MS25043-22DA MS3105-22
24 MS25042-24DA MS25043-24DA MS3105-24
28 MS25042-28DA MS25043-28DA MS3105-28
32 MS25042-32DA MS25043-32DA MS3105-32
36 MS25042-36DA MS25043-36DA MS3105-36
40 MS25042-40DA MS25043-40DA MS3105-40
SHELL
SIZE
PLUG CAP RECEPTACLE DUMMY RECEPTACLES
DUST CAPS
Synthetic rubber gaskets are used to ensure a moisture tight seal between a receptacle
and the panel. Gaskets are available for front or rear panel mounting of style 3100 and 3102
connectors. Gasket thickness is approximately .031" (1 mm), for nonconductive and low
temperature types.
Conductive shielding gaskets contain an imbedded metal screen for EMI/RFI shielding in
addition to moisture sealing. Gaskets are available for front or rear panel mounting of
connectors. Gasket thickness is .020" (.5 mm).
