SPEC NO: DSAG8873 REV NO: V.5 DATE: MAR/22/2011 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000563
SURFACE MOUNT DISPLAY
Part Number: ACSA08-51CGKWA Green
Features
z0.8 inch digit height.
zLow current operation.
zExcellent character appearance.
zMechanically rugged.
zGray face, white segment.
zPackage: 200pcs/ reel
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Description
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG8873 REV NO: V.5 DATE: MAR/22/2011 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000563
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
ACSA08-51CGKWA Green (AlGaInP) White Diffused 9000 22000 Common Anode,
Rt. Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 574 nm IF=20mA
λD [1] Dominant Wavelength Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG8873 REV NO: V.5 DATE: MAR/22/2011 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000563
Green ACSA08-51CGKWA
SPEC NO: DSAG8873 REV NO: V.5 DATE: MAR/22/2011 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000563
ACSA08-51CGKWA
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG8873 REV NO: V.5 DATE: MAR/22/2011 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000563
PACKING & LABEL SPECIFICATIONS ACSA08-51CGKWA