THYRISTOR MODULE PK(PD,PE)70FG UL;E76102 M Power Thyristor/Diode Module PK70FG series are designed for various rectifier circuits and power controls. For your circuit application, following internal connections and wide voltage ratings up to 1600V are available. and electrically isolated mounting base make your mechanical design easy. 92 2 2 2 5 35 Internal Configurations K G 1600A 100A/s dv/dt 1000V/s di/dt IT(AV) 70A, IT(RMS) 110A, ITSM KG -6 Mx1 A1K2 1 K1 G1 A2 3 2 1 K2 A1K2 PK 4-TAB K1 A2 PE NAME PLATE MAX 2 K2 3 K2 G2 K2 G2 Applications Various rectifiers AC/DC motor drives Heater controls Light dimmers Static switches K2 3 2 A1K2 1 K2 K1 G1 A2 UnitA PD Maximum Ratings Tj25 unless otherwise specified Ratings Symbol Item PK70FG40 PD70FG40 PE70FG40 PK70FG80 PD70FG80 PE70FG80 PK70FG120 PD70FG120 PE70FG120 PK70FG160 PD70FG160 PE70FG160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V VDRM Repetitive Peak off-state Voltage 400 800 1200 1600 V Symbol Item ITAV Average On-state Current ITRMS R.M.S. On-state Current ITSM It 2 PGM PGAV 1 2 I t Value for one cycle surge current 2 Cycle, 50/60HZ, Peak Value, non-repetitive Peak Gate Power Dissipation Average Gate Power Dissipation Peak Gate Current VFGM Peak Gate Voltage (Forward) VRGM Peak Gate Voltage (Reverse) di/dt VISO Critical Rate of Rise of On-state Current Tstg Single phase, half wave, 180conduction, Tc84 Surge On-state Current IFGM Tj Conditions Single phase, half wave, 180conduction, Tc84 Isolation Breakdown VoltageR.M.S. Ratings A 110 A 1460/1600 10660 A W 1 W 3 A 10 V 100 V A/s 2500 V Operating Junction Temperature -40 to 125 Storage Temperature Mounting Torque A.C. 1minute A2S 10 5 IG100mA VD12VDRM di G /dt0.1A/s Unit 70 -40 to 125 MountingM5 Recommended Value 1.5-2.515-25 2.728 TerminalM5 Recommended Value 1.5-2.515-25 2.728 Nm fB 170 g Ratings Unit Mass Typical Value Electrical Characteristics Symbol Item IDRM Conditions Repetitive Peak off-state Current,max Tj125VDVDRM 20 mA IRRM Repetitive Peak Reverse Current,max Tj125VDVDRM 20 mA VTM On-state Voltage,max IT210A 1.6 V IGT Gate Trigger Current,max VD6VIT1A 50 mA VGT Gate Trigger Voltage,max VD6VIT1A 3 V Gate Non-Trigger Voltage,min Tj125VD12VDRM 0.25 V Critical Rate of Rise of off-state Voltage,min Tj125VD23VDRM 1000 V/s Junction to case 0.37 /W VGD dv/dt Rthj-cThermal Impedance,max markThyristor and Diode part. No markThyristor part SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/ PK(PD,PE)70FG Gate Characteristics VFGM10V PG M 10 W PG AV W On-State VoltageV IFGMA Gate VoltageV Gate CurrentmA Surge On-State Current Rating Non-Repetitive Per One Element Transient Thermal Impedance HZ HZ Junction to Case Per One Element = start On-State VoltageV Transient Thermal Impedance j-c/W Surge On-State CurrentA = Maximum VGD On-State Voltage max Timecycles http://store.iiic.cc/ Time tsec