P R O D U C T D A T A S H E E T
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2007 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
The Connor-Winfield models 7113,
7123 and 7133 are 3.3V HCMOS,
Surface Mount, Fixed Frequency
Crystal Oscillators (XO) designed
for use in all applications requiring
precision clocks. These oscillators
feature low stand-by current
(10uA) when output is disabled.
The surface mount package is
designed for high-density mounting
and is optimum for mass
production.
1 2
7113 - 50.00 MHz
CLOCK
SERIES
CENTER
FREQUENCY
1.8 to 160 MHz
3.3V OPERATION
TRI-STATE ENABLE / DISABLE FUNCTION
OVERALL FREQUENCY TOLERANCE:
7113 ±25ppm
7123 ±50ppm
7133 ±100ppm
TEMPERATURE RANGE: 0 to 70°C
POWER SAVING FUNCTION: 10uA when
disabled.
CERAMIC SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT / LEAD FREE
3.3V SURFACE MOUNT 5x3.2mm
LVCMOS CLOCK OSCILLATOR
Sm087 04 12/19/07
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
Package Outline
FEATURES
DESCRIPTION
7113 A5
50 MHz
7113, 7123, 7133
Dimensional Tolerance: ±.02” (.508mm)
±.005” (.127mm)
PAD CONNECTION
1 ENABLE/DISABLE
2 GROUND
3 OUTPUT
4 Vcc
Note:
1) Inclusive of calibration @ 25°C, frequency vs. temperature stability, supply voltage change, load
change, shock and vibration, 10 years aging.
2) Oscillator output is enabled with no connection on pad 1.
3) Duty Cycle measured at 50% of Vcc.
4) Rise and Fall times measured from 10% to 90%.
ABSOLUTE MAXIMUM RATINGS TABLE 1.0
PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE
Storage Temperature -55 - 125 °C
Supply Voltage (Vcc) -0.5 - 7.0 Vdc
MODEL SPECIFICATIONS: TABLE 2.0
MODEL 7113
Frequency Range (Fo) 1.8 - 160 MHz
Frequency Tolerance: -25 - 25 ppm 1
MODEL 7123
Frequency Range (Fo) 1.8 - 160 MHz
Frequency Tolerance: -50 - 50 ppm 1
MODEL 7133
Frequency Range (Fo) 1.8 - 160 MHz
Frequency Tolerance: -100 - 100 ppm 1
OPERATING SPECIFICATIONS TABLE 3.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Operating Temperature Range 0 - 70 °C
Supply Voltage (Vdd) 3.0 3.3 3.6 Vdc
Supply Current 1.5 to 49.999 MHz (Icc) - - 20 mA
50 to 79.999 MHz (Icc) - - 30 mA
80 to 124.999 MHz (Icc) - - 40 mA
125 to 160.999 MHz (Icc) - - 50 mA
INPUT CHARACTERISTICS TABLE 4.0
Enable Voltage (Vih) > 70% Vdd - - Vdc 2
Disable Voltage (Vil) - - < 30% Vdd Vdc
Enable Time - - 10 mS
Disable Time - - 150 nS
Output Disable Current (Icc) - - 10 uA
HCMOS OUTPUT CHARACTERISTICS TABLE 5.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
LOAD - - 15 pF
Voltage (High) (Voh) 2.70 - - Vdc
(Low) (Vol) - - 0.36 Vdc
Current (High) (Ioh) -2 - - mA
(Low) (Ioh) - - 2 mA
Duty Cycle 1.5 to 49.999 MHz 45 50 55 %
50 to 160 MHz 40 50 60 %
Rise / Fall Time 1.5 to 79.999 MHz - - 6 nS 3
80 to 124.999 MHz - - 4 nS 3
125 to 160 MHz - - 3 nS 3
Start-Up Time - - 10 mS
Jitter - - 5 pS RMS
PACKAGE CHARACTERISTICS TABLE 6.0
Package Hermetically sealed ceramic package and metal cover
(1.50mm)
0.060
0.037
(0.95mm)
0.100
(2.54mm)
0.040
(1.02mm)
0.042 MAX.
(1.07mm)
0.025
(0.64mm)
0.134 MAX
(3.40mm)
0.205 MAX.
(5.21mm)
7113 A5
50MHZ
1
Type:
Clock
3.2x5.0mm
Package
Temperature
Range:
1 = 0 to 70
° C.
Frequency
Tolerance:
=
2 =
3 =
1 ± 25 ppm
± 50 ppm
± 100 ppm
Output Frequency:
Frequency Format
-xxx.xM Minimum*
-xxx.xxxxxxM Maximum*
*Amount of numbers after the decimal point.
M = MHz
71050.0M
Supply
Voltage:
3 = 3.3 Vdc
-
Example: To order an 7113 with an output frequency of:
4 MHz = 7113-004.0M
44.736 MHz = 7113-044.736M
125 MHz = 7113-125.0M
3
ORDERING INFORMATION
Pad Connections
P R O D U C T D A T A S H E E T
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2007 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
2 2
Sm087 04 12/19/07
Dimensional Tolerance: ±.02” (.508mm)
±.005” (.127mm)
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
