8
Multi-contact 3-position enabling switches Ideal for installing in large teach pendants
Types
Note: Specify rubber boot color code in place of ∗ in the Type No.
Ratings
••
•• Contact Ratings
•Minimum applicable load (reference value): 3V AC/DC, 5 mA
Type
Contact Configuration
Type No. Ordering Type No. Package
Quantity
3-position Switch Button Return
Monitor Switch
Button Depress
Monitor Switch
Without Rubber Boot
2 0 0 HE2B-M200 HE2B-M200 1
HE2B-M200PN10 10
2 1 1 HE2B-M211 HE2B-M211 1
HE2B-M211PN10 10
2 2 2 HE2B-M222 HE2B-M222 1
HE2B-M222PN10 10
With
Rubber Boot
Rubber Boot Material:
Silicon Rubber
Color:
Y: yellow
B: black
2 0 0 HE2B-M200P∗HE2B-M200P∗1
HE2B-M200P∗PN10 10
2 1 1 HE2B-M211P∗HE2B-M211P∗1
HE2B-M211P∗PN10 10
2 2 2 HE2B-M222P∗HE2B-M222P∗1
HE2B-M222P∗PN10 10
Rubber Boot Material:
NBR/PVC Polyblend
Color: gray
2 0 0 HE2B-M200PN1 HE2B-M200PN1 1
HE2B-M200PN1PN10 10
2 1 1 HE2B-M211PN1 HE2B-M211PN1 1
HE2B-M211PN1PN10 10
2 2 2 HE2B-M222PN1 HE2B-M222PN1 1
HE2B-M222PN1PN10 10
Rated Insulation Voltage (Ui) 250V
Rated Thermal Current (Ith) 3A
Rated Voltage (Ue) 30V 125V 250V
Rated Current (Ie)
3-position Switch
AC Resistive Load (AC-12) — 1A 0.5A
Inductive Load (AC-15) — 0.7A 0.5A
DC Resistive Load (DC-12) 1A 0.2A —
Inductive Load (DC-13) 0.7A 0.1A —
Button Return Monitor Switch
Button Depress Monitor Switch
AC Resistive Load (AC-12) — 2A 1A
Inductive Load (AC-15) — 1A 0.5A
DC Resistive Load (DC-12) 2A 0.4A 0.2A
Inductive Load (DC-13) 1A 0.22A 0.1A
Contact Configuration
3-position Switch 2 contacts
Button Return Monitor Switch 0 to 2 contacts
Button Depress Monitor Switch 0 to 2 contacts
•Ergonomically-designed OFF-ON-OFF operation.
•Easy recognition of position 1 to 2 transition is made possible by a snap
action switch.
•Sufficient difference in operating force is provided for shifting from posi-
tion 2 to 3.
•Low pressure is required to maintain position 2, allowing for longtime
operation.
•Reliable operation is assured even when the edge of the operator button
is pressed.
•The switch does not turn ON while being released from position 3 (OFF)
to position 1 (OFF) (IEC60204-1, 9.2.5.8).
•Some teach pendants are equipped with two 3-position enabling
switches, and when one switch is pressed to position 3 (OFF), the other
switch must not enable machine operation even when pressed to posi-
tion 2. Enabling of machine operation must resume after both switches
are released. For this purpose, also available are 3-position enabling
switches with monitoring switches for button returned to position 1 and
button pressed to position 3 (monitor switches have direct opening
action mechanism).
•Two contacts are provided in a 3-position enabling switch so that even if
one contact fails due to welding or short-circuit, the other contact can
disable machine operation.
•The waterproof rubber boot provides IP65 protection.
Direct Opening
Action
••
•• Type No. Development HE2B - M 2 0 0 P ∗
• Rubber Boot Material, Color
Blank: No rubber boot
Y: Silicon rubber, yellow
B: Silicon rubber, black
N1: NBR/PVC polyblend, gray
• Rubber Boot
Blank: No rubber boot
P: With rubber boot
• 3-position Switch
2: 2 contacts
• Button Return Monitor Switch
0: No switch
1: 1 contact
2: 2 contacts
• Button Depress Monitor Switch
0: No switch
1: 1 contact
2: 2 contacts
HE2B Enabling Switch
(05/12/07)
9
HE2B Enabling Switch
Specifications
Operation Characteristics
Applicable Standards IEC 60947-5-1, EN60947-5-1 (DEMKO approval), UL508 (UL recognized)
CSA C22.2, No. 14 (c-UL recognized), JIS C8201-5-1
Applicable Standards for Use ISO 12100 / EN 292, IEC 60204-1 / EN 60204-1
ISO11161 / prEN 11161, ISO10218 / EN 775, ANSI / RIA R15.06, ANSI B11.19
Operating Temperature –25 to +60°C (no freezing) (without rubber boot, with silicon rubber boot)
–10 to +60°C (no freezing) (with NBR/PVC polyblend rubber boot)
Relative Humidity 45 to 85% RH (no condensation)
Storage Temperature –40 to +80°C (no freezing)
Pollution Degree 2 (inside panel, terminal side)
3 (outside panel, operator side)
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance Between live and dead metal parts: 100 MΩ minimum (500V DC megger)
Between terminals of different poles: 100 MΩ minimum (500V DC megger)
Impulse Withstand Voltage 2.5 kV
Operating Frequency 1,200 operations per hour
Mechanical Durability Position 1 → 2 → 1: 1,000,000 operations minimum
Position 1 → 2 → 3 → 1: 100,000 operations minimum
Electrical Durability 100,000 operations minimum
Shock Resistance Operating extremes: 150 m/s2
Damage limits: 1,000 m/s2
Vibration Resistance Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits: 16.7 Hz, amplitude 1.5 mm
Terminal Style Solder terminal
Applicable Wire 1 cable, 0.5 mm2 maximum
Solder Terminal Heat Resistance 310 to 350 °C, 3 seconds maximum
Terminal Tensile Strength 20N minimum
Mounting Screw Recommended Tightening Torque 0.5 to 0.8 N·m
Degree of Protection IP40 (without rubber boot)
IP65 (with rubber boot)
Conditional Short-circuit Current 50A (250V) (Use 250V/10A fast acting type fuse for short-circuit protection.)
Direct Opening Force 60N minimum (button return monitor and button depress monitor switches)
Operator Strength 500N minimum (when pressing the entire button surface)
Weight (approx.) 26g (without rubber boot)
30g (with rubber boot)
Notes:
• When a rubber boot is used, the operating force depends on the operating temperature.
• The operating force to shift the switch from position 2 to position 3 can be changed. For details, contact IDEC.
0
Operating Force (reference value)
Travel (mm) 1.4±0.3 2.4±0.3 3.0±0.3 6.0±0.5
3.6±0.5 4.2±0.5
Approx. 30N
Approx. 4N
Between NO1 - C1
When pressing the operator
Between NO2 - C2
Between 11 - 12
Between 21 - 22
Between 31 - 32
Between 41 - 42
Between NO1 - C1
When releasing the operator
Between NO2 - C2
Between 11 - 12
Between 21 - 22
Between 31 - 32
Between 41 - 42
: ON (closed)
: OFF (open)
Position 1 Position 2 Position 3
(without rubber boot, when pressing
the center of the operator)
(05/12/07)
AS-Interface Components
HE2B Enabling Switch
10
Terminal Arrangement (Bottom View)
Dimensions
Mounting Hole Layout
Accessories
• Replacement Rubber Boot
Note: Specify a rubber boot color code in place of ∗ in the Type No.
Material Color Type No. Ordering Type No. Package Quantity
Silicon Rubber Y: yellow
B: black HE9Z-D2∗HE9Z-D2∗PN10 10
NBR/PVC Polyblend Gray HE9Z-D2N1 HE9Z-D2N1PN10
IDEC Logo Side
HE2B-M200
IDEC Logo Side
HE2B-M211
IDEC Logo Side
HE2B-M222
•3-position switch (note): 2 contacts, terminal nos. between NO1 – C1, NO2 – C2
•Button return monitor switch: 0 to 2 contacts, terminal nos. between 11 – 12, 21 – 22
•Button depress monitor switch: 0 to 2 contacts, terminal nos. between 31 – 32, 41 – 42
Note: Use NO and C terminals for OFF → ON → OFF 3-position switch (NC terminal is not used).
M3 nut hole
10
16
14.2
7
69
87
13.5
5.5
5
78
66.5
6.5
5
11.5
19
68
69
714.2
90
14.8
• Without Rubber Boot • With Rubber Boot
• M3 nuts are supplied with the HE2B enabling switch.
M
ounting Panel Thickness: 6 max
.
M
ounting
S
crews
0
+
0
.
2
12.2
±
0
.
2
7
8
2-
3.2
±
0
.
2
7
0
• Mounting screw: Two M3 screws
• Length of mounting screw: The thickness of mounting panel + 4 to 5 mm
All dimensions in mm.
(05/12/07)