https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Type 1 / Class I / B arrester (lightning current arrester) with encapsulated arc chopping spark gap, 1-channel. Housing width: 17.5 mm (1 Div.) Your advantages High discharge capacity 1-channel Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356479967 Weight per Piece (excluding packing) 180.000 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 88.6 mm Width 17.6 mm Depth 66.2 mm Horizontal pitch 1 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) 06/27/2020Page1/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Technical data Ambient conditions Ambient temperature (operation) -40 C ... 85 C Ambient temperature (storage/transport) -40 C ... 85 C Altitude 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % General IEC test classification I T1 EN type T1 IEC power supply system TN-S TN-C TT Mode of protection L-PEN Mounting type DIN rail: 35 mm Color black Housing material PA 6.6 Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, one-piece Number of positions 1 Surge protection fault message none Protective circuit Nominal voltage UN 230/400VAC (TN) 230/400VAC (TT) Nominal frequency fN 50 Hz (60Hz) Maximum continuous operating voltage UC (L-PEN) 385 VAC Rated load current IL 80 A Residual current IPE 0.1 mA Standby power consumption PC 35 mVA Nominal discharge current In (8/20) s (L-PEN) 35 kA Impulse discharge current (10/350) s (L-PEN), charge 17.5 As Impulse discharge current (10/350) s (L-PEN), specific energy 306 kJ/ Impulse discharge current (10/350)s (L-PEN), peak current value Iimp 35 kA Follow current interrupt rating Ifi (L-PEN) 3 kA (260 V AC) 1.5 kA (385 V AC) Short-circuit current rating ISCCR 3 kA (260 V AC) 1.5 kA (385 V AC) 06/27/2020Page2/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Technical data Protective circuit Voltage protection level Up (L-PEN) 5 kV Front of wave sparkover voltage at 6 kV (1.2/50) s 5 kV TOV behavior at UT (L-PEN) 440 VAC (5s / withstand mode) 440 VAC (120min / withstand mode) Response time tA (L-PEN) 100 ns Max. backup fuse with V-type through wiring 80 A AC (gG) Max. backup fuse with branch wiring 400 A AC (gG) Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 14.5 mm Conductor cross section flexible min. 2.5 mm Conductor cross section flexible max. 25 mm Conductor cross section solid min. 2.5 mm Conductor cross section solid max. 35 mm Conductor cross section AWG 6 ... 2 Standards and Regulations Standards/regulations IEC61643-11 2011 EN61643-11 2012 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 06/27/2020Page3/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Dimensional drawing Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27130802 eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130802 eCl@ss 8.0 27130802 eCl@ss 9.0 27130802 06/27/2020Page4/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Classifications ETIM ETIM 2.0 EC000381 ETIM 3.0 EC000381 ETIM 4.0 EC000381 ETIM 5.0 EC000381 ETIM 6.0 EC000381 ETIM 7.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 UNSPSC 18.0 39121620 UNSPSC 19.0 39121620 UNSPSC 20.0 39121620 UNSPSC 21.0 39121620 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC EAC-Zulassung EAC RU CDE.A*30.B01561 06/27/2020Page5/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Accessories Accessories Bridge Wiring bridge-MPB 18/1- 2-2809209 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos. Wiring bridge-MPB 18/1- 6-2748564 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos. Wiring bridge-MPB 18/1- 8-2748577 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos. Wiring bridge-MPB 18/1- 9-2748580 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos. Wiring bridge-MPB 18/1-57-2809238 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos. 06/27/2020Page6/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Accessories Wiring bridge-MPB 18/1-12-2748593 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos. Wiring bridge-MPB 18/1- 4-2809225 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos. Wiring bridge-MPB 18/1- 3-2809212 Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos. Device marking Zack marker strip-ZBN 18:UNBEDRUCKT-2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 End block 06/27/2020Page7/8 https://www.phoenixcontact.com/us/products/2800110 Combination type 1/2 protective device-FLT 35-260-2800110 Accessories End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray Labeled device marker Marker for terminal blocks-ZBN 18,LGS:ERDE-2749589 Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker for terminal blocks-ZBN 18,LGS:L1-N,ERDE-2749576 Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker pen Marker pen-B-STIFT-1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 06/27/2020Page8/8