HLMP-ELxx
HLMP-EHxx
HLMP-EDxx
Precision Optical Performance
AlInGaP II LED Lamps
Technical Data
Features
• Well Defined Spatial
Radiation Patterns
• Viewing Angles: 15°,
23°, 30°
• High Luminous Output
• Colors:
592 nm Amber
617 nm Reddish-Orange
630 nm Red
• High Operating
Temperature:
TJLED = +130°C
• Superior Resistance to
Moisture
Benefits
• Viewing Angles Match
Traffic Management
Requirements
• Colors Meet Automotive and
Traffic Signal Specifications
• Superior Light Output
Performance in Outdoor
Environments
• Suitable for Autoinsertion
into PC Boards
Applications
• Traffic Management:
Traffic Signals
Work Zone Warning Lights
Variable Message Signs
• Commercial Outdoor
Advertising:
Signs
Marquees
• Automotive:
Exterior and Interior Lights
Description
Precision Optical Performance
AlInGaP II (aluminum indium
gallium phosphide) LEDs offer
superior light output for excellent
readability in sunlight and
dependable performance. The
AlInGaP II technology provides
extremely stable light output over
long periods of time.
These LED lamps are untinted,
nondiffused, T-13/4 packages
incorporating second generation
optics which produce well
defined radiation patterns at
specific viewing cone angles.
These lamps are made with an
advanced optical grade epoxy
offering superior high tempera-
ture and high moisture resistance
performance in outdoor signal
and sign applications. The
maximum LED junction tempera-
ture limit of +130°C enables high
temperature operation in bright
sunlight conditions. The epoxy
contains both uv-a and uv-b
inhibitors to reduce the effects of
long term exposure to direct
sunlight.
22
T-13/4 (5 mm) Precision Optical Performance AlInGaP II LED Lamps
Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ1
/2Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max.
HLMP-EL16-TW000 HLMP-EL18-TW000 2170 8300
HLMP-EL16-TWR00 HLMP-EL18-TWR00 2170 8300
HLMP-EL16-TWK00* 2170 8300
HLMP-EL16-TWS00 2170 8300
HLMP-EL16-TUS00 2170 4800
Amber 592 HLMP-EL16-TV400** 2170 6300
HLMP-EL16-TVU00 2170 6300
HLMP-EL16-UX000 HLMP-EL18-UX000 2750 10700
HLMP-EL16-UXR00 HLMP-EL18-UXR00 2750 10700
HLMP-EL16-VW000 3600 8300
15° HLMP-EL16-VWR000 3600 8300
HLMP-EL16-VWK00* 3600 8300
HLMP-EL16-VWS00 3600 8300
HLMP-EL16-VX000 3600 10700
HLMP-EL16-VXR00 3600 10700
HLMP-EL16-VX400** 3600 10700
HLMP-EL16-VXK00* 3600 10700
HLMP-EL16-VXS00 3600 10700
HLMP-EL16-VY000 HLMP-EL18-VY000 3600 13800
HLMP-EL16-VYR00 HLMP-EL18-VYR00 3600 13800
HLMP-EL16-VYK00* 3600 13800
HLMP-EL16-VYS00 3600 13800
Red-Orange 615 HLMP-EH18-TW000 2170 8300
HLMP-EH16-UX000 HLMP-EH18-UX000 2750 10700
Red 630 HLMP-ED16-TW000 HLMP-ED18-TW000 2170 8300
HLMP-ED16-TWT00 HLMP-ED18-TWT00 2170 8300
HLMP-ED16-UX000 HLMP-ED18-UX000 2750 10700
HLMP-ED16-UXT00 HLMP-ED18-UXT00 2750 10700
3
T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)
Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ1/2Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max
HLMP-EL25-QS400** 1000 2900
HLMP-EL25-QSU00 1000 2900
HLMP-EL25-QSK00* 1000 2900
HLMP-EL25-QSS00 1000 2900
HLMP-EL25-QT000 1000 3700
HLMP-EL25-QTR00 HLMP-EL27-QTR00 1000 3700
HLMP-EL25-RU000 HLMP-EL27-RU000 1300 4800
HLMP-EL25-RUR00 HLMP-EL27-RUR00 1300 4800
HLMP-EL25-RUK00* 1300 4800
23°Amber 592 HLMP-EL25-RUS00 1300 4800
HLMP-EL25-ST000 1650 3700
HLMP-EL25-STR00 1650 3700
HLMP-EL25-STK00* 1650 3700
HLMP-EL25-STS00 1650 3700
HLMP-EL25-SU000 1650 4800
HLMP-EL25-SUR00 1650 4800
HLMP-EL25-SU400** 1650 4800
HLMP-EL25-SUU00 1650 4800
HLMP-EL25-SUK00* 1650 4800
HLMP-EL25-SUS00 1650 4800
HLMP-EL25-SVK00* 1650 6300
HLMP-EL25-SVS00 1650 6300
HLMP-EL25-SV000 HLMP-EL27-SV000 1650 6300
HLMP-EL25-SVR00 HLMP-EL27-SVR00 1650 6300
HLMP-EL25-TW000 HLMP-EL27-TW000 2170 8300
HLMP-EL25-TWR00 HLMP-EL27-TWR00 2170 8300
HLMP-EL25-TWK00* 2170 8300
HLMP-EL25-TWS00 2170 8300
Notes:
1. Dominant Wavelength, λd, is derived from the CIE
Chromaticity Diagram and represents the color of the
lamp.
2. θ1/2 is the off-axis angle where the luminous intensity is
one half the on-axis intensity.
3. The luminous intensity is measured on the mechanical axis
of the lamp package.
4. The optical axis is closely aligned with the package
mechanical axis.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4
only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
44
T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)
Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ1/2Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max
HLMP-EH25-QT000 1000 3700
Red-Orange 615 HLMP-EH25-RU000 1300 4800
HLMP-EH27-SV000 1650 6300
HLMP-EH25-TW000 HLMP-EH27-TW000 2170 8300
23º HLMP-ED25-QT000 1000 3700
HLMP-ED25-QTT00 1000 3700
Red 630 HLMP-ED25-RU000 HLMP-ED27-RU000 1300 4800
HLMP-ED25-RUT00 HLMP-ED27-RUT00 1300 4800
HLMP-ED25-SV000 HLMP-ED27-SV000 1650 6300
HLMP-ED25-SVT00 HLMP-ED27-SVT00 1650 6300
HLMP-ED25-TW000 HLMP-ED27-TW000 2170 8300
HLMP-ED25-TWT00 HLMP-ED27-TWT00 2170 8300
HLMP-EL31-QRS00 1000 2200
HLMP-EL31-QS000 1000 2900
HLMP-EL31-QSR00 1000 2900
HLMP-EL31-QS400** 1000 2900
HLMP-EL31-QSU00 1000 2900
HLMP-EL31-QT000 HLMP-EL33-QT000 1000 3700
30°Amber 592 HLMP-EL31-QTR00 HLMP-EL33-QTR00 1000 3700
HLMP-EL31-QTK00* 1000 3700
HLMP-EL31-QTS00 1000 3700
HLMP-EL31-SV000 HLMP-EL33-SV000 1650 6300
HLMP-EL31-SVR00 HLMP-EL33-SVR00 1650 6300
HLMP-EL31-ST000 1650 3700
HLMP-EL31-STR00 1650 3700
HLMP-EL31-STK00* 1650 3700
HLMP-EL31-STS00 1650 3700
HLMP-EL31-SUK00* 1650 4800
Notes:
1. Dominant Wavelength, λd, is derived from the CIE
Chromaticity Diagram and represents the color of the
lamp.
2. θ1/2 is the off-axis angle where the luminous intensity is
one half the on-axis intensity.
3. The luminous intensity is measured on the mechanical axis
of the lamp package.
4. The optical axis is closely aligned with the package
mechanical axis.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4
only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
5
T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)
Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ1/2Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max.
HLMP-EL31-SUS00 1650 4800
HLMP-EL31-SU400** 1650 4800
Amber 592 HLMP-EL31-SUU00 1650 4800
HLMP-EL31-SU000 1650 4800
HLMP-EL31-SUR00 1650 4800
HLMP-EL31-SVK00* 1650 6300
HLMP-EL31-SVS00 1650 6300
HLMP-EH31-PS000 765 2900
30°Red-Orange 615 HLMP-EH31-QT000 HLMP-EH33-QT000 1000 3700
HLMP-EH31-RU000 HLMP-EH33-RU000 1300 4800
HLMP-EH31-SV000 HLMP-EH33-SV000 1650 6300
HLMP-EH31-SU000 1650 4800
HLMP-ED33-QT000 1000 3700
HLMP-ED31-QTT00 HLMP-ED33-QTT00 1000 3700
Red 630 HLMP-ED31-ST000 1650 3700
HLMP-ED31-STT00 1650 3700
HLMP-ED31-SU000 1650 4800
HLMP-ED31-SUT00 1650 4800
HLMP-ED31-RU000 HLMP-ED33-RU000 1300 4800
HLMP-ED31-RUT00 HLMP-ED33-RUT00 1300 4800
HLMP-ED31-SV000 HLMP-ED33-SV000 1650 6300
HLMP-ED31-SVT00 HLMP-ED33-SVT00 1650 6300
Notes:
1. Dominant Wavelength, λd, is derived from the CIE
Chromaticity Diagram and represents the color of the
lamp.
2. θ1/2 is the off-axis angle where the luminous intensity is
one half the on-axis intensity.
3. The luminous intensity is measured on the mechanical axis
of the lamp package.
4. The optical axis is closely aligned with the package
mechanical axis.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4
only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
66
HLMP- x x xx - xxxxx
Mechanical Options
00: Bulk Packaging
DD: Ammo Pack
YY: Flexi-Bin, Bulk Packaging
ZZ: Flexi-Bin; Ammo Pack
Color Bin & VF Selections
0: No color bin limitation[1]
4: Amber color bin 4 only
K: Amber color bins 2 and 4 only
R: Amber color bins 1, 2, 4, 6, and 7 with VF max of 2.6 V
S: Amber color bins 2 and 4 with VF max of 2.6 V
T: Red color with VF max of 2.6 V
U: Amber color bin 4 with VF max of 2.6 V
V: Amber color bins 1, 2, 4, and 6 with VF max of 2.6 V
Maximum Intensity Bin
0: No Iv bin limitation
Minimum Intensity Bin
Viewing Angle and Lead Standoffs
16: 15 degree without lead standoffs
18: 15 degree with lead standoffs
25: 23 degree without lead standoffs
27: 23 degree with lead standoffs
31: 30 degree without lead standoffs
33: 30 degree with lead standoffs
Color
D: 630 nm Red
H: 615 nm Red-Orange
L: 592 nm Amber
Package
E: 5 mm Round
Note:
1. For amber color, “0” includes color bins 1, 2, 4, and 6 only.
Part Numbering System
7
Absolute Maximum Ratings at TA = 25°C
DC Forward Current[1,2,3] ............................................................ 50 mA
Peak Pulsed Forward Current[2,3] .............................................. 100 mA
Average Forward Current ............................................................ 30 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
LED Junction Temperature.......................................................... 130°C
Operating Temperature .............................................. -40°C to +100°C
Storage Temperature .................................................. -40°C to +120°C
Dip/Drag Solder Temperature................................ 260°C for 6 seconds
Through-the-Wave Preheat Temperature ..................................... 145°C
Through-the-Wave Solder Temperature ................. 245°C for 3 seconds
[1.59 mm (0.060 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents
between 10 mA and 30 mA are recommended. For more information on recommended
drive conditions, please refer to Application Brief I-024 (5966-3087E).
3. Please contact your sales representative about operating currents below 10 mA.
AB
1.14 ± 0.20
(0.045 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244) MIN.
0.70 (0.028)
MAX.
1.00
(0.039)MIN.
8.71 ± 0.20
(0.343 ± 0.008)
0.50 ± 0.10
(0.020 ± 0.004)SQ. TYP.
CATHODE
LEAD
d
1.50 ± 0.15
(0.059 ± 0.006)
5.80 ± 0.20
(0.228 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
CATHODE
FLAT
PART NO. d
HLMP-EX18-xxxxx 12.60 ± 0.18
(0.496 ± 0.007)
HLMP-EX27-xxxxx 11.59 ± 0.25
(0.446 ± 0.010)
HLMP-EX33-xxxxx 11.99 ± 0.25
(0.472 ± 0.010)
Package Dimensions
2.35 (0.093)
MAX.
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244) MIN.
0.70 (0.028)
MAX.
1.00
(0.039)MIN.
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)SQ. TYP.
CATHODE
LEAD
CATHODE
FLAT
8.71 ± 0.20
(0.343 ± 0.008
1.14 ± 0.20
(0.045 ± 0.008)
AB
88
Electrical/Optical Characteristics at TA = 25°C
Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage IF = 20 mA
Amber (λd = 592 nm) 2.15
Red-Orange (λd = 617 nm) VF2.08 2.4[1] V
Red (λd = 630 nm) 2.00
Reverse Voltage VR520 VI
R
= 100 µA
Peak Wavelength Peak of Wavelength of
Amber 594 Spectral Distribution
Red-Orange λPEAK 623 nm at IF = 20 mA
Red 639
Spectral Halfwidth ∆λ1/2 17 nm Wavelength Width at
Spectral Distribution
1/2 Power Point at
IF = 20 mA
Speed of Response τs20 ns Exponential Time
Constant, e-t/τ
Capacitance C 40 pF VF = 0, f = 1 MHz
Thermal Resistance RΘJ-PIN 240 °C/W LED Junction-to-Cathode
Lead
Luminous Efficacy[2] Emitted Luminous
Amber 500 Power/Emitted Radiant
Red-Orange ηv235 lm/W Power at If = 20 mA
Red 155
Note:
1. For options -xxRxx, -xxSxx, -xxTxx, -xxUxx, and -xxVxx, max forward voltage (Vf) is 2.6 V.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in
candelas and ηv is the luminous efficacy in lumens/watt.
s
Figure 1. Relative Intensity vs. Peak Wavelength.
WAVELENGTH – nm
RELATIVE INTENSITY
550 600 650 700
1.0
0.5
0
AMBER RED-ORANGE
RED
Figure 2. Forward Current vs.
Forward Voltage.
CURRENT – mA
1.0
0
V
F
– FORWARD VOLTAGE – V
2.5
100
40
30
1.5 2.0
60
3.0
10
20
50
RED
70
80
90
AMBER
9
Figure 6. Representative Spatial Radiation Pattern for 24° Viewing Angle Lamps.
NORMALIZED INTENSITY
1.00
0
ANGULAR DISPLACEMENT – DEGREES
0.80
0.60
0.50
0.70
0.20
-20 -15
0.10
0.30
0.40
-10 0 5 10 15 20 25
0.90
-25 -5
Figure 3. Relative Luminous Intensity
vs. Forward Current. Figure 4. Maximum Forward Current
vs. Ambient Temperature. Derating
Based on TJMAX = 130°C.
I
F
– FORWARD CURRENT – mA
0
0
T
A
– AMBIENT TEMPERATURE – °C
40 80
50
40
30
20
10
20 60 100
Rθ
JA
= 585° C/W
Rθ
JA
= 780° C/W
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0
0
I
F
– DC FORWARD CURRENT – mA
40
2.0
1.5
1.0
0.5
20 50
2.5
10 30
Figure 5. Representative Spatial Radiation Pattern for 15° Viewing Angle
Lamps.
NORMALIZED INTENSITY
1.00
0
ANGULAR DISPLACEMENT – DEGREES
0.80
0.60
0.50
0.70
0.20
-20 -15
0.10
0.30
0.40
-10 0 5 10 15 20 25
0.90
-25 -5
Bin
Name Min. Max.
1 584.5 587.0
2 587.0 589.5
4 589.5 592.0
6 592.0 594.5
7 594.5 597.0
Bin
Name Min. Max.
P 880 1150
Q 1150 1500
R 1500 1900
S 1900 2500
T 2500 3200
U 3200 4200
V 4200 5500
W 5500 7200
X 7200 9300
Y 9300 12000
Z 12000 16000
Intensity Bin Limits
(mcd at 20 mA)
Tolerance for each bin limit is
±15%.
Amber Color Bin Limits
(nm at 20 mA)
Tolerance for each bin limit is
±0.5 nm.
Note:
1. Bin categories are established for
classification of products. Products
may not be available in all bin
categories.
NORMALIZED INTENSITY
1.00
0
ANGULAR DISPLACEMENT – DEGREES
0.80
0.60
0.50
0.70
0.20
0.10
0.30
0.40
0.90
-20 -15 -10 0 5 10 15 20 25-25 -5
Figure 7. Representative Spatial Radiation Pattern for 30° Viewing Angle Lamps.
10
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
August 27, 2001
Obsoletes 5968-4303E (11/99)
5988-2805EN
