Precision Optical Performance AlInGaP II LED Lamps Technical Data HLMP-ELxx HLMP-EHxx HLMP-EDxx Features Applications * Well Defined Spatial Radiation Patterns * Viewing Angles: 15, 23, 30 * High Luminous Output * Colors: 592 nm Amber 617 nm Reddish-Orange 630 nm Red * High Operating Temperature: TJLED = +130C * Superior Resistance to Moisture * Traffic Management: Traffic Signals Work Zone Warning Lights Variable Message Signs * Commercial Outdoor Advertising: Signs Marquees * Automotive: Exterior and Interior Lights Benefits * Viewing Angles Match Traffic Management Requirements * Colors Meet Automotive and Traffic Signal Specifications * Superior Light Output Performance in Outdoor Environments * Suitable for Autoinsertion into PC Boards Description Precision Optical Performance AlInGaP II (aluminum indium gallium phosphide) LEDs offer superior light output for excellent readability in sunlight and dependable performance. The AlInGaP II technology provides extremely stable light output over long periods of time. These LED lamps are untinted, nondiffused, T-13/4 packages incorporating second generation optics which produce well defined radiation patterns at specific viewing cone angles. These lamps are made with an advanced optical grade epoxy offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications. The maximum LED junction temperature limit of +130C enables high temperature operation in bright sunlight conditions. The epoxy contains both uv-a and uv-b inhibitors to reduce the effects of long term exposure to direct sunlight. 2 T-13 /4 (5 mm) Precision Optical Performance AlInGaP II LED Lamps Selection Guide Typical Viewing Angle 2 1/ 2 (Deg.)[2] Color and Dominant Wavelength (nm), Typ.[1] Lamps Without Standoffs (Outline Drawing A) Lamps With Standoffs (Outline Drawing B) HLMP-EL16-TW000 HLMP-EL18-TW000 2170 8300 HLMP-EL16-TWR00 HLMP-EL18-TWR00 2170 8300 2170 8300 HLMP-EL16-TWK00* Amber 592 15 HLMP-EL16-TWS00 2170 8300 HLMP-EL16-TUS00 2170 4800 HLMP-EL16-TV400** 2170 6300 HLMP-EL16-TVU00 2170 6300 HLMP-EL16-UX000 HLMP-EL18-UX000 2750 10700 HLMP-EL16-UXR00 HLMP-EL18-UXR00 2750 10700 HLMP-EL16-VW000 3600 8300 HLMP-EL16-VWR000 3600 8300 HLMP-EL16-VWK00* 3600 8300 HLMP-EL16-VWS00 3600 8300 HLMP-EL16-VX000 3600 10700 HLMP-EL16-VXR00 3600 10700 HLMP-EL16-VX400** 3600 10700 HLMP-EL16-VXK00* 3600 10700 HLMP-EL16-VXS00 3600 10700 HLMP-EL16-VY000 HLMP-EL18-VY000 3600 13800 HLMP-EL16-VYR00 HLMP-EL18-VYR00 3600 13800 HLMP-EL16-VYK00* 3600 13800 HLMP-EL16-VYS00 3600 13800 HLMP-EH18-TW000 2170 8300 HLMP-EH16-UX000 HLMP-EH18-UX000 2750 10700 HLMP-ED16-TW000 HLMP-ED18-TW000 2170 8300 HLMP-ED16-TWT00 HLMP-ED18-TWT00 2170 8300 HLMP-ED16-UX000 HLMP-ED18-UX000 2750 10700 HLMP-ED16-UXT00 HLMP-ED18-UXT00 2750 10700 Red-Orange 615 Red 630 Luminous Intensity Iv (mcd) [3,4] @ I(f) = 20 mA Min. Max. 3 T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued) Selection Guide Typical Viewing Angle 2 1/2 (Deg.)[2] 23 Color and Dominant Wavelength (nm), Typ.[1] Amber 592 Lamps Without Standoffs (Outline Drawing A) Lamps With Standoffs (Outline Drawing B) Luminous Intensity Iv (mcd) [3,4] @ I(f) = 20 mA Min. Max HLMP-EL25-QS400** 1000 2900 HLMP-EL25-QSU00 1000 2900 HLMP-EL25-QSK00* 1000 2900 HLMP-EL25-QSS00 1000 2900 HLMP-EL25-QT000 1000 3700 HLMP-EL25-QTR00 HLMP-EL27-QTR00 1000 3700 HLMP-EL25-RU000 HLMP-EL27-RU000 1300 4800 HLMP-EL25-RUR00 HLMP-EL27-RUR00 1300 4800 HLMP-EL25-RUK00* 1300 4800 HLMP-EL25-RUS00 1300 4800 HLMP-EL25-ST000 1650 3700 HLMP-EL25-STR00 1650 3700 HLMP-EL25-STK00* 1650 3700 HLMP-EL25-STS00 1650 3700 HLMP-EL25-SU000 1650 4800 HLMP-EL25-SUR00 1650 4800 HLMP-EL25-SU400** 1650 4800 HLMP-EL25-SUU00 1650 4800 HLMP-EL25-SUK00* 1650 4800 HLMP-EL25-SUS00 1650 4800 HLMP-EL25-SVK00* 1650 6300 HLMP-EL25-SVS00 1650 6300 HLMP-EL25-SV000 HLMP-EL27-SV000 1650 6300 HLMP-EL25-SVR00 HLMP-EL27-SVR00 1650 6300 HLMP-EL25-TW000 HLMP-EL27-TW000 2170 8300 HLMP-EL25-TWR00 HLMP-EL27-TWR00 2170 8300 HLMP-EL25-TWK00* 2170 8300 HLMP-EL25-TWS00 2170 8300 Notes: 1. Dominant Wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 2. 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 3. The luminous intensity is measured on the mechanical axis of the lamp package. 4. The optical axis is closely aligned with the package mechanical axis. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 4 T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued) Selection Guide Typical Viewing Angle 2 1/2 (Deg.)[2] Color and Dominant Wavelength (nm), Typ.[1] Red-Orange 615 Lamps Without Standoffs (Outline Drawing A) HLMP-EH25-QT000 1000 3700 HLMP-EH25-RU000 1300 4800 HLMP-EH27-SV000 1650 6300 HLMP-EH27-TW000 2170 8300 1000 3700 HLMP-EH25-TW000 23 Lamps With Standoffs (Outline Drawing B) HLMP-ED25-QT000 HLMP-ED25-QTT00 Red 630 30 Amber 592 Luminous Intensity Iv (mcd) [3,4] @ I(f) = 20 mA Min. Max 1000 3700 HLMP-ED25-RU000 HLMP-ED27-RU000 1300 4800 HLMP-ED25-RUT00 HLMP-ED27-RUT00 1300 4800 HLMP-ED25-SV000 HLMP-ED27-SV000 1650 6300 HLMP-ED25-SVT00 HLMP-ED27-SVT00 1650 6300 HLMP-ED25-TW000 HLMP-ED27-TW000 2170 8300 HLMP-ED25-TWT00 HLMP-ED27-TWT00 2170 8300 HLMP-EL31-QRS00 1000 2200 HLMP-EL31-QS000 1000 2900 HLMP-EL31-QSR00 1000 2900 HLMP-EL31-QS400** 1000 2900 HLMP-EL31-QSU00 1000 2900 HLMP-EL31-QT000 HLMP-EL33-QT000 1000 3700 HLMP-EL31-QTR00 HLMP-EL33-QTR00 1000 3700 HLMP-EL31-QTK00* 1000 3700 HLMP-EL31-QTS00 1000 3700 HLMP-EL31-SV000 HLMP-EL33-SV000 1650 6300 HLMP-EL31-SVR00 HLMP-EL33-SVR00 1650 6300 HLMP-EL31-ST000 1650 3700 HLMP-EL31-STR00 1650 3700 HLMP-EL31-STK00* 1650 3700 HLMP-EL31-STS00 1650 3700 HLMP-EL31-SUK00* 1650 4800 Notes: 1. Dominant Wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 2. 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 3. The luminous intensity is measured on the mechanical axis of the lamp package. 4. The optical axis is closely aligned with the package mechanical axis. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 5 T-13 /4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued) Selection Guide Typical Viewing Angle 2 1/2 (Deg.)[2] Color and Dominant Wavelength (nm), Typ.[1] Lamps Without Standoffs (Outline Drawing A) Lamps With Standoffs (Outline Drawing B) HLMP-EL31-SUS00 Amber 592 30 Red-Orange 615 HLMP-EL31-SU400** 1650 4800 HLMP-EL31-SUU00 1650 4800 HLMP-EL31-SU000 1650 4800 HLMP-EL31-SUR00 1650 4800 HLMP-EL31-SVK00* 1650 6300 HLMP-EL31-SVS00 1650 6300 HLMP-EH31-PS000 765 2900 HLMP-EH31-QT000 HLMP-EH33-QT000 1000 3700 HLMP-EH31-RU000 HLMP-EH33-RU000 1300 4800 HLMP-EH31-SV000 HLMP-EH33-SV000 1650 6300 1650 4800 HLMP-ED33-QT000 1000 3700 HLMP-ED33-QTT00 1000 3700 HLMP-ED31-ST000 1650 3700 HLMP-ED31-STT00 1650 3700 HLMP-ED31-SU000 1650 4800 HLMP-ED31-SUT00 1650 4800 1300 4800 HLMP-EH31-SU000 HLMP-ED31-QTT00 Red 630 Luminous Intensity Iv (mcd) [3,4] @ I(f) = 20 mA Min. Max. 1650 4800 HLMP-ED31-RU000 HLMP-ED33-RU000 HLMP-ED31-RUT00 HLMP-ED33-RUT00 1300 4800 HLMP-ED31-SV000 HLMP-ED33-SV000 1650 6300 HLMP-ED31-SVT00 HLMP-ED33-SVT00 1650 6300 Notes: 1. Dominant Wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 2. 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 3. The luminous intensity is measured on the mechanical axis of the lamp package. 4. The optical axis is closely aligned with the package mechanical axis. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 6 Part Numbering System HLMP- x x xx - x x x xx Mechanical Options 00: Bulk Packaging DD: Ammo Pack YY: Flexi-Bin, Bulk Packaging ZZ: Flexi-Bin; Ammo Pack Color Bin & VF Selections 0: No color bin limitation[1] 4: Amber color bin 4 only K: Amber color bins 2 and 4 only R: Amber color bins 1, 2, 4, 6, and 7 with VF max of 2.6 V S: Amber color bins 2 and 4 with VF max of 2.6 V T: Red color with VF max of 2.6 V U: Amber color bin 4 with VF max of 2.6 V V: Amber color bins 1, 2, 4, and 6 with VF max of 2.6 V Maximum Intensity Bin 0: No Iv bin limitation Minimum Intensity Bin Viewing Angle and Lead Standoffs 16: 15 degree without lead standoffs 18: 15 degree with lead standoffs 25: 23 degree without lead standoffs 27: 23 degree with lead standoffs 31: 30 degree without lead standoffs 33: 30 degree with lead standoffs Color D: 630 nm Red H: 615 nm Red-Orange L: 592 nm Amber Package E: 5 mm Round Note: 1. For amber color, "0" includes color bins 1, 2, 4, and 6 only. 7 Package Dimensions A 5.00 0.20 B 5.00 0.20 (0.197 0.008) (0.197 0.008) 8.71 0.20 (0.343 0.008 1.14 0.20 (0.045 0.008) 8.71 0.20 (0.343 0.008) d 1.14 0.20 (0.045 0.008) 2.35 (0.093) MAX. 31.60 (1.244) MIN. 31.60 (1.244) MIN. 1.50 0.15 (0.059 0.006) 0.70 (0.028) MAX. 0.70 (0.028) MAX. PART NO. d HLMP-EX18-xxxxx CATHODE LEAD 12.60 0.18 (0.496 0.007) HLMP-EX27-xxxxx 11.59 0.25 (0.446 0.010) CATHODE LEAD HLMP-EX33-xxxxx 1.00 MIN. (0.039) CATHODE FLAT A 0.50 0.10 SQ. TYP. (0.020 0.004) 5.80 0.20 (0.228 0.008) 2.54 0.38 (0.100 0.015) 0.50 0.10 SQ. TYP. (0.020 0.004) 1.00 MIN. (0.039) 5.80 0.20 (0.228 0.008) CATHODE FLAT B 2.54 0.38 (0.100 0.015) Absolute Maximum Ratings at TA = 25C DC Forward Current[1,2,3] ............................................................ 50 mA Peak Pulsed Forward Current [2,3] .............................................. 100 mA Average Forward Current ............................................................ 30 mA Reverse Voltage (I R = 100 A) ......................................................... 5 V LED Junction Temperature .......................................................... 130C Operating Temperature .............................................. -40C to +100C Storage Temperature .................................................. -40C to +120C Dip/Drag Solder Temperature ................................ 260C for 6 seconds Through-the-Wave Preheat Temperature ..................................... 145C Through-the-Wave Solder Temperature ................. 245C for 3 seconds [1.59 mm (0.060 in.) below seating plane] Notes: 1. Derate linearly as shown in Figure 4. 2. For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more information on recommended drive conditions, please refer to Application Brief I-024 (5966-3087E). 3. Please contact your sales representative about operating currents below 10 mA. 11.99 0.25 (0.472 0.010) 8 Electrical/Optical Characteristics at TA = 25 C Parameter Forward Voltage Amber (d = 592 nm) Red-Orange (d = 617 nm) Red (d = 630 nm) Reverse Voltage Peak Wavelength Amber Red-Orange Red Spectral Halfwidth Symbol Min. Typ. 5 2.15 2.08 2.00 20 VF VR Max. Units 2.4[1] V IR = 100 A Peak of Wavelength of Spectral Distribution at IF = 20 mA V 1/2 594 623 639 17 Speed of Response s 20 ns Capacitance Thermal Resistance C RJ-PIN 40 240 pF C/W Luminous Efficacy[2] Amber Red-Orange Red v 500 235 155 lm/W PEAK Test Conditions IF = 20 mA nm nm Wavelength Width at Spectral Distribution 1/2 Power Point at IF = 20 mA Exponential Time Constant, e-t/ s VF = 0, f = 1 MHz LED Junction-to-Cathode Lead Emitted Luminous Power/Emitted Radiant Power at If = 20 mA Note: 1. For options -xxRxx, -xxSxx, -xxTxx, -xxUxx, and -xxVxx, max forward voltage (Vf) is 2.6 V. 2. The radiant intensity, Ie, in watts per steradian, may be found from the equation I e = Iv/v, where I v is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 100 1.0 RED-ORANGE 90 80 RED CURRENT - mA RELATIVE INTENSITY AMBER 0.5 70 RED 60 50 40 30 AMBER 20 10 0 550 600 650 WAVELENGTH - nm Figure 1. Relative Intensity vs. Peak Wavelength. 700 0 1.0 1.5 2.0 2.5 VF - FORWARD VOLTAGE - V Figure 2. Forward Current vs. Forward Voltage. 3.0 9 2.0 1.5 1.0 0.5 0 50 IF - FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.5 40 RJA = 585 C/W 30 RJA = 780 C/W 20 10 0 0 20 10 30 50 40 0 40 20 60 80 100 TA - AMBIENT TEMPERATURE - C IF - DC FORWARD CURRENT - mA Figure 4. Maximum Forward Current vs. Ambient Temperature. Derating Based on TJMAX = 130C. Figure 3. Relative Luminous Intensity vs. Forward Current. 1.00 NORMALIZED INTENSITY 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 ANGULAR DISPLACEMENT - DEGREES Figure 5. Representative Spatial Radiation Pattern for 15 Viewing Angle Lamps. 1.00 NORMALIZED INTENSITY 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 ANGULAR DISPLACEMENT - DEGREES Figure 6. Representative Spatial Radiation Pattern for 24 Viewing Angle Lamps. 10 1.00 NORMALIZED INTENSITY 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0 -25 -20 -10 -15 -5 0 5 10 15 20 25 ANGULAR DISPLACEMENT - DEGREES Figure 7. Representative Spatial Radiation Pattern for 30 Viewing Angle Lamps. Intensity Bin Limits (mcd at 20 mA) Amber Color Bin Limits (nm at 20 mA) Bin Name Min. Max. Bin Name Min. Max. P 880 1150 1 584.5 587.0 Q 1150 1500 2 587.0 589.5 R 1500 1900 4 589.5 592.0 S 1900 2500 6 592.0 594.5 T 2500 3200 7 594.5 597.0 U 3200 4200 V 4200 5500 W 5500 7200 X 7200 9300 Y 9300 12000 Z 12000 16000 Tolerance for each bin limit is 15%. Tolerance for each bin limit is 0.5 nm. Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. www.semiconductor.agilent.com Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. August 27, 2001 Obsoletes 5968-4303E (11/99) 5988-2805EN