Surface Mount Aluminum Electrolytic Capacitors SHT Series (High Temperature) MERITEK o 105 C, 1,000 to 2,000 Hours SPECIFICATIONS ITEM CHARACTERISTICS Operating Temperature Range -40 to +105oC Rated Voltage 6.3 to 50VDC 20% (M) at 20OC, 120Hz Capacitance Tolerance) I < 0.01CV or 3A, whichever is greater (at 20OC after 2 minutes.) Where I: Leakage current(A), C: Nominal capacitance(F), V: Rated voltage (VDC) Leakage Current Dissipation Factor (Tan ) RATED VOLTAGE SIZE D 4 -6.3 8 -10 (at 20oC, 120Hz) Low Temperature Characteristics Max. impedance ratio at 120Hz, 20oC RATED VOLTAGE TEMP O At -25 C O At -40 C 6.3V 0.30 0.40 6.3V 4 10 10V 0.24 0.30 10V 3 8 16V 0.20 0.26 16V 2 6 25V 0.16 0.16 25V 2 4 35V 0.14 0.14 35V 2 3 50V 0.12 0.12 50V 2 3 The following specifications shall be satisfied when the capacitors are restored to 20OC after the rated voltage applied with the following conditions. Load Life Rated Voltage Capacitance change 4~ 6.3 105oC , 1,000 hours 8~ 10 105oC , 2,000 hours 30% of the initial value 20% of the initial value DF(tan ) 300% of the initial specified value 200% of the initial specified value Leakage current initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 oC after exposing them with the following conditions. Shelf Life Rated Voltage Capacitance change 4~ 6.3 105oC , 500 hours 8~ 10 105oC , 1,000 hours 25% of the initial value 20% of the initial value DF(tan ) 200% of the initial specified value 200% of the initial specified value Leakage current initial specified value Others Satisfies characteristic W of KS C 6421 PART NUMBERING SYSTEM 16V SHT 221 M D55 Meritek Series Rated Voltage CODE/VOLTAGE 6.3V 10V 16V 25V 100 10 101 100 35V 50V Capacitance CODE F R1 0.1 R47 0.47 2R0 2 4R7 4.7 Capacitance tolerance (20%) Case size Specifications are subject to change without notice. rev.6a Surface Mount Aluminum Electrolytic Capacitors SHT Series (High Temperature) DIMENSIONS MERITEK SOLDER PAD On PC Board, recommended Note 1 : For case size 8x10(H10) and 10X10(J10).the pvc sleeve with marking covers the side of the body. Note 2 : L+0.5 for 8x10(H63), 8x10(H10), 10X10(J10). D 4 5 6.3 8 8 10 Case code D55 E55 F55 H63 H10 J10 L 5.2 5.2 5.2 6.3 10 10 A 4.3 5.3 6.6 8.3 8.3 10 B 4.3 5.4 6.6 8.3 8.3 10.3 C 5.1 5.9 7.2 9.0 9.0 11.0 W 0.5-0.8 0.5-0.8 0.5-0.8 0.5-0.8 0.7-1.1 0.7-1.1 P 1.0 1.4 1.9 2.3 3.1 4.5 a 1.0 1.4 1.9 2.3 3.1 4.5 b 2.6 3.0 3.5 4.5 4.2 4.4 c 1.6 1.6 1.6 1.6 2.2 2.2 NOTE: L=5.7 for D60, E60 and F60. Ripple Current (mA rms/105oC, 120HZ) C.C (case code) R.C (Ripple current) RATING OF SHT SERIES VDC Item 6.3 C.C 10 R.C. C.C 16 R.C. C.C 25 R.C. C.C 35 R.C. C.C 50 R.C. C.C R.C. F 0.1 D55 0.22 D55 1.3 2.9 0.33 D55 3.2 0.47 D55 3.8 1 D55 5.6 2.2 D55 10 3.3 D55 14 4.7 10 D55 15 E55 19 29 D55 16 E55 25 E55 25 F55 22 D55 21 E55 30 E55 30 F55 40 F55 40 H63 70 33 E55 34 E55 34 F55 45 F55 45 H63 80 H10 140 47 E55 36 F55 48 F55 48 H63 80 H10 170 H10 170 100 F55 56 H63 90 H10 180 H10 180 J10 310 J10 310 220 H10 180 H10 180 J10 375 J10 375 J10 375 330 H10 290 J10 450 J10 450 J10 450 J10 450 J10 460 470 J10 460 1000 J10 520