( BXA3O Series Single and dual output _ (800) 554-1224 (818) 889-8412 sr Distributed By: mt B. J. Wolfe Enterprises www.bjwe.com DC/DC CONVERTERS | 30W Wide Input DC/DC Converters * Designed to meet telecom power supply interface standard ETS300-132-2 * UL, VDE and CSA safety approvals * VDE0878 and EN55022 conducted emissions level A * EN61000-4-2, -3, -4, -5, -6 immunity compliant * Fixed frequency operation at 350kHz MTBF in excess of 7,005,000 hours (demonstrated) + Basic insulation system The BXA30 series, comprising 9 different models, has been conceived as an applications-specific range of DC/DC converters, specifically addressing telecommunications, industrial electronics, test equipment, mobile telecommunications and distributed power applications. The series offers three wide input voltage ranges, 9- 18VDC and 36-75VDC, and is available in single and dual output versions. Designed to meet ETSI telecoms interface standards ETS300-132-2 and BTR2511, together with internal filtering to EN55022 level A, safety approval to EN60950 and UL1950, and isolation of 1500VDC, the 48VDC models are ideal for telecommunications applications. The 12V models are particularly suited to industrial, mobile telecom and test equipment applications, featuring EN61000-4-2, -3, -4, -5 and -6 immunity compliant. Other features include low output ripple, overvoltage protection, continuous short circuit protection, remote enable and remote sense. a All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS CEwD ~& W G 2 YEAR WARRANTY SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability Singles +10% Conducted emissions EN55022, FCC part 15 (Note 4) Level A : ) EN55022, FCC part 15 (Note 5) Level B Line regulation LL to HL (single/dual) +0.2%/+0.4% VDE0878 (Note 4) (48V) Level A Load regulation FL to NL (single/dual) 0.2%/+0.4% Radiated emissions EN55022, FCC part 15 Level A ESD air EN61000-4-2, level 3 Perf. criteria 2 Ripple and noise 3.3V 6OmV pk-pk ESD contact EN61000-4-2, level 4 Perf. criteria 2 (20MHz bandwidth) 5.0V 50mV pk-pk Surge EN61000-4-5, level 3 Perf. criteria 2 All others 100mV pk-pk Fast transients EN61000-4-4, level 3 Perf. criteria 2 All models 20mV rms Radiated immunity EN61000-4-3, level 3 Perf. criteria 2 Temperature coefficient 10.02%!" Conducted immunity EN61000-4-6, level 3 Perf. criteria 2 Overvoltage protection Transient 135% Vout alhcathdaaenaniarhehalnesabbchbes Short circuit protection Singles Continuous ney, peo Duals (single short) (See BXA15/30 Isolation voltage Input/output 1500VDC Design Note 100) Basic insulation input/case, 48V models 1500VDC D I sh ti ee Continuous Switching frequency Fixed 350kHz i % to 100% | .09 Transient response 25% to 100% load 4.0% Approvals and VDE0805, EN60950 Voltage accuracy 1.5% standards JEC950, UL1950 - (See Note 12) CSA C22.2 No. 950 Load cross regulation Duai output 3.0% 30% to 100% output variation Case material Aluminum substrate with plastic case INPUT SPECIFICATIONS Material flammability UL94V-0 120g (4.2402) ENVIRONMENTAL SPECIFICATIONS Demonstrated @ 25C 7,005,000 hours Baseplate operating -25C to +100C temperature, (See Notes 6, 8) Non-operating -55C to +100C Input voltage range 12Vin nominal 9 to 18VDC Weight 48Vin nominal 36 to 75VDC Reverse voltage Yes ene protection (See Note 7) Max. input rise and 48V 5V/ms Thermal performance fall time ETS300-132 Remote ON/OFF Logic compatibility CMOS/TTL ON open DG Thermal impedance Free air convection, 6.5C/W baseplate to air With heatsink (See Note 8) 5.2C/IW Distributed By: BXA30 Series (EL Bs Wale Enterprise Single and dual output (800) 554-1224 (818) 889-8412 DC/DC CONVERTERS | 30W Wide Input DC/DC Converters For the most current data and application support visit www.artesyn.com/powergroup/products.htm 40.2% 40.2% 40.2% +1.0% 40.2% 40.2% 40.4% 40.4% 40.4% BXA30-12S05 BXA30-48S3V3 BXA30-48S3V3/8 (11) BXA30-48S05 BXA30-48812 BXA30-48S15 BXA30-48D05 BXA30-48D12 BXA30-48D15 9-18VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC Notes 1 2 3 4 Nominal, at no load. Low line to high line. Full load to no-load. For duals, the value stated is for balanced loads. An optional internal filter is available, which will meet VDE0871 level A, VDE0878 tevel A and EN55022 level A. Add the suffix '-F to the model number, e.g. BXA30-48S12-F. See BXA15 and BXA30 Design Note 100. 5 For conducted noise operation of the BXA30 to VDE0871, VDE0878 and EN55022 level B, see BXA15 and BXA30 Design Note 100. 6 For extended operating temperature, include the heatsink option, *-1' in the model number. Max. heatsink height is 12.5mm, e.g. BXA30-48S15-1 7 Reverse voltage protection can be implemented by putting a slow blow fuse on the negative input rail. Rate the fuse for 48VDC at 1.5A and 12VDC at 6A. 8 The maximum operating ambient temperature, without derating depends on internal power dissipation and hence efficiency and cooling method. BXA15 and BXA30 Design Note 100 provides detailed thermal calculations and design-in details. 9 Test results to-date are 1,590,000 hours @ 46C. The MTBF figure shown includes a calculated acceleration factor of 4.1 based on an activation energy of -0.55 eV. 10 Visit the Artesyn website to download a copy of Design Note 100. 41 This model has the same electrical pin-out and pin pitch spacings as the drawing on the following page. Dimensions are 76.2 x 76.2 x 14.2mm, +0.3mm, 12 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 13 If remote sense is not used, connect +sense to +vout and -sense to -vout. International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 14501-3336-7006 Licence No. 6231 . W UL1950 File No. 174104 @ CSA C22.2 No. 950 File No. LR41062C L Distributed By: B X, A 3 0 Se [ | e S (| B. J. Wolfe Enterprises _M Ne www.bjwe.com Single and dual output (800) 554-1224 (818) 889-8412 DC/DC CONVERTERS | 30W Wide Input DC/DC Converters For the most current data and application support. visit www.artesyn.com/powergroup/products.htm EXTERNAL OUTPUT TRIMMING Single output models canbe 5 6 1 + Vin + Vin externally trimmed by +10% ar sing either method shown. uP 2 - Vin - Vin USING ener Oe ON 4 toKa TRIMPOT 3 + Sense (13) + Vout oe DOWN 4 Trim Common Oo : 3 5 - Sense ~ Vout 6 + Vout No Pin 7 ~- Vout No Pin 8 Remote ON/OFF Remote ON/OFF 3.02 0.76 mI 3 50 (76.30 + 0.30) (19.2040.30} : > 0.302 (63.5) 0.20 7 6740.30) (5.08) >| + 0.20 (5.08) 4 | , @ oe oO ; + 3 0.80 (20.32) \ l + oie 4 | | (24.13) 0.50 (12.70) y | 5 | | 0.6 (15.24) v Tt | Io t | ? kh | ! 4 f 6 .4 (10. aot y 18 | BOTTOM i |, | axnoao | 4 VIEW | + (33.02) 0.30 (7.62) ql ! | ahs Pag (29.21) g vow | os a -~@ 8 Places J 2.00 0.52 > Ix Case/Metal Inserts M3.0 + 60.80) SSS (13.3020.30) (Typ. 4 Places) SIDE VIEW ALL DIMENSIONS IN INCHES (mm) Tolerance .XX +0.02 XXX 0.005