C
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1 amp @ 28 VDC; 1 amp @ 125 VAC.
Current Carrying Capacity: 5 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 20 milliohms.
Insulation Resistance: In excess of 10,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
C5 - SOLDER LUG TERMINALS
SWITCHES - 30° INDEX - ADJUSTABLE STOPS - SET @ 2 POS. - SEALED
C5 - P.C. TERMINALS
SWITCHES - 30° INDEX - ADJUSTABLE STOPS - SET @ 2 POS. - SEALED
C5/C6 - SERIES
0.92" DIAMETER 1.0 AMP @ 28 VDC
The C5 Series offers a very economical and lightweight design. Standard
features include 30° indexing up to 12 positions, solder lug terminals, fixed
stops, and both internal and external seals for washability.
The C6 Series offers the same features in an unsealed design.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Terminals and Contacts: Brass with silver plate as standard.
Insulation: Polyester.
Index: Molded live spring detent.
Index Life: 10,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard.
Index Stops: Fixed standard, adjustable, or continuous available.
Stop Strength: 4.5 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGE 55.
STANDARD CONSTRUCTION
12
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
SPECIFICATIONS AND ORDERING INFORMATION
ACTIVE POLES/ NO. OF NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING *
ACTIVE POLES/ NO. OF NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING *
01 02-12 1 1 C5P0112N - A CE 01 02-12 1 1 C5P0112N - RA CE
02 02-06 2 1 C5P0206N - A CJ 02 02-06 2 1 C5P0206N - RA CJ
03 02-04 3 1 C5P0304N - A CL 03 02-04 3 1 C5P0304N - RA CL
04 02-03 4 1 C5P0403N - A CM 04 02-03 4 1 C5P0403N - RA CM
C6 - UNSEALED C6 - UNSEALED
01 02-12 1 1 C6P0112N - A CE 01 02-12 1 1 C6P0112N - RA CE
02 02-06 2 1 C6P0206N - A CJ 02 02-06 2 1 C6P0206N - RA CJ
03 02-04 3 1 C6P0304N - A CL 03 02-04 3 1 C6P0304N - RA CL
04 02-03 4 1 C6P0403N - A CM 04 02-03 4 1 C6P0403N - RA CM
C
P
CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS
(SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY)
ADDITIONAL OPTIONS
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
C5/C6 - SERIES
CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS.
PRINTED
CIRCUIT
BOARD
TERMINAL
PATTERNS
SHAFT
AND
FLAT
OPTIONS
13
1-POLE 2-POLE 3-POLE 4-POLE
SHAFT AS VIEWED
WITH NON-TURN LUG
AT 9 O'CLOCK AND
SHAFT IN EXTREME
CCW POSITION .
TERMINAL
TYPES
N
ADDITIONAL OPTIONS AND
ORDERING INFORMATION
2 DIGIT INSULATION TOTAL ACTIVE CONTACT
SERIES TYPE POLES POSITIONS TYPE
TERMINAL INDEX STOP SHAFT/ SHAFT
TYPE ANGLE TYPE BUSHING FLAT
C5 P - POLYESTER 01 12 - MAX N - NON -
SEALED 02 06 - MAX SHORTING
03 04 - MAX
04 03 - MAX
C6 P - POLYESTER 01 12 - MAX N - NON -
UNSEALED 02 06 - MAX SHORTING
03 04 - MAX
04 03 - MAX
L-SOLDER LUG F - FIXED
R-REAR P.C. A - ADJ.
C-CONT.
SEE SEE
CHART CHART
"A" "B"
How to Order Additional Options:
R
L
1
1
11
11
1
1
1
1 = 1ST POSITION
Y
14 1 1/2
15 SLOTTED
1
