REV 09/01
Specifications @ (Tsubmount = 20°C)
Model Unit SOA1300MRI/P
Min Typ Max
Supply current mA 0 250
Operating device temperature °C 10 35
Maximum Gain (G max) dB 21 22
Gain ripple @ G max dB 0.2 1.0
Pol. Dependence* dB 0.5 1.5
Opt. Sat. power (3dB) @ G max dBm 6.0
Noise Figure @ G max dB 9 13
3 dB Optical Band width nm 30
Gain center wave length @ G max nm 1290 1320
Model Unit SOA1300MRI/A
Min Typ Max
Supply current mA 0 250
Operating device temperature °C 10 35
Maximum Gain (G max) dB 18 20
Gain ripple @ G max dB 0.3 1.0
Pol. Dependence* dB 0.5 2.5
Opt. Sat. power (3dB) @ G max dBm 5.0
Noise Figure @ G max dB 10 15
3 dB Optical Band width nm 30
Gain center wave length @ G max nm 1290 1320
Model Unit SOA1300MRI/B
Min Typ Max
Supply current mA 0 250
Operating device temperature °C 10 35
Maximum Gain (G max) dB 15 17
Gain ripple @ G max dB 0.5 2.0
Pol. Dependence* dB 3.5
Opt. Sat. power (3dB) @ G max dBm 4.0
Noise Figure @ G max dB 11 17
3 dB Optical Band width nm 30
Gain center wave length @ G max nm 1290 1320
Packaging
The Module includes Thermistor/TEC with a LEMO
Connector and a SMA Power supply connector.
Package specific ations Unit
Dimensions L, W, h 74, 26, 20 mm
Max. Peltier current 1.8 A
Thermistor @ 25°C 10 kΩ
SM-Pigtail length 1.0 m
Features
High gain
Low polarization dependence
Low ripple
High output saturation power
1.30 µm wavelength window
Product Description
The SOA1300MRI is a pigtailed module containing a
SOA1300CRI optical amplifier chip. The module
operates in the 1.30 µm window and is designed to have
high gain, low polarization dependence, low ripple and
high output saturation power.
The module includes a Peltier element and a 10 kΩ
thermistor for device temperature stabilization.
The module uses SMA connectors for the electrical
connection of the amplifier and has 1 m fibre pigtails.
Optionally available are Optical connectors, PM fibres
and internal Bias-T.
Opto Speed reserves the right to make chan ges in design,
specifications and other information at any time without prior notice.
Information in this data sheet is believed to be reliable. However, no
responsibility is assumed for possible inaccuracy or omission.
SOA 1300MRI
Optical Amplifier
Module 1.30
µ
m
λ
-
W
indow
Opto Speed Ticino SA Via Cantonale, CH-6805 Mezzovico, Switzerland
Tel. +41 91 93 5 52 52, Fax +41 91 935 52 62
sales@optospeed.com, www.optospeed.com
