Rectifier Module PSBI 30/06 IC25 = 42 A
for Power Factor Correction VCES = 600 V
IF25 = 42 A
VRRM = 1400 V
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 1
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Data according to IEC 60747 refer to a single diode
unless otherwise stated
Preliminary Data Sheet
IGBT
Symbol Test Conditions Maximum Ratings
VCES TVJ = 25 °C to 150 °C 600 V
VGES continuous ±20 V
IC25 TC = 25 °C 42 A
IC80 TS = 80 °C 29 A
RBSOA VCE = 600 V, RG = 10 Ω, TVJ = 125 °C ICM = 100 A
clamped inductive load, L = 100 µH VCEK≤VCES
tSC VCE = 600 V, VGE = ±15 V, RG = 10 Ω,10µs
TVJ = 125 °C, non-repetitive
Symbol Test Conditions Characteristic Values
TVJ = 25 °C, unless otherwise specified
VCE(sat) VGE = 15 V, IC = 30 A, TVJ = 25 °C max. 2.9 V
VCE(sat) VGE = 15 V, IC = 30 A, TVJ = 25 °C typ. 2.4 V
VCE(sat) TVJ = 125 °C typ. 2.9 V
VGE(th) VGE = VCE, IC = 0.3 mA min. 3 V
VGE(th) VGE = VCE, IC = 0.3 mA max. 5 V
ICES VCE = VCES, VGE = 0 V, TVJ = 25 °C max. 0.04 mA
ICES TVJ = 125 °C typ. 1 mA
IGES VCE = 0 V, VGE = ±20 V max. 100 nA
td(on) typ. 30 n s
trtyp. 50 n s
td(off) typ. 270 n s
tftyp. 70 n s
Eon typ. 0.78 mJ
Eoff typ. 0.55 mJ
Cies VCE = 25 V, f = 1 MHz, VGE = 0 V typ. 1500 pF
QGon VCE = 480 V, IC = 30 A, VGE = 15 V typ. 140 nC
RthJC max. 0.96 K/W
RthJH max. tbd K/W
}
Module
Symbol Test Conditions Maximum Ratings
TVJ -40...+150 °C
TJM 150 °C
Tstg -40...+150 °C
Visol 50/60 Hz t = 1 min 3000 V∼
Iisol ≤ 1 mA t = 1 s 3600 V∼
MdMounting torque (M 4) 1.5-1.8 Nm
Weight typ. 18 g
inductive load, TVJ = 125 °C
VCE = 400 V, IC = 10 A
VGE = ±15 V, RG = 10 Ω
Caution: These devices are sensitive
to electrostatic discharge. Users should
observe proper ESD handling precautions.
Features
• Package with DCB ceramic base
plate and soldering pins for PCB
mounting
• Isolation voltage over 3000 V∼
• Planar glasspassivated chips
• NPT IGBT with low saturation
voltage, ultra fast switching
capability, high RBSOA and
short circuit ruggedness
• leads suitable for PC board
soldering
•UL registered, E 148688
Applications
• single phase rectification with
power factor correction (PFC)
• low harmonic content of mains
current
• mains current and voltage in phase
• wide input voltage range, controlled
output voltage
H
N
5
7
- 4
~1
+3
- G
~ A
+ D
http://store.iiic.cc/
ECO-PACTM 1
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Package style and outline
under development
Symbol Test Conditions Maximum Ratings
Symbol Test Conditions Characteristic Value
IRVR = VRRM, TVJ = TVJM ≤ 3.0 mA
VR = VRRM, TVJ = 25°C ≤ 0.5 mA
VFIF = 50 A, TVJ = 25 °C ≤ 1.55 V
VTO For power-loss calculations only 0.85 V
rT 13 mΩ
RthJC per diode; DC 2.9 K/W
RthJK per diode; DC 3.2 K/W
dsCreeping distance on surface 11.2 mm
dACreeping distance in air 9.7 mm
aMax. allowable acceleration 50 m/s²
Rectifier Diodes
IF25 TC = 25 °C 42 A
IF80 TC = 80 °C 27 A
IFSM TVJ = 45 °C t = 10 ms (50 Hz), sine 300 A
VR = 0 t = 8.3 ms (60 Hz), sine 320 A
TVJ = TVJM t = 10 ms (50 Hz), sine 260 A
VR = 0 t = 8.3 ms (60 Hz), sine 280 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 450 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 425 A²s
TVJ = TVJM t = 10 ms (50 Hz), sine 340 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 325 A²s
http://store.iiic.cc/
