Technical Data AT27 Translucent Repair Tape Issue 11 / May 2006 General description A translucent PVC repair tape coated with a clear, pressure sensitive adhesive. Easy unwind Flexible Conformable to awkward shapes Water resistant Good abrasion resistance Non-corrosive adhesive UV resistant Specifications Certification* to the BS3887 : 1991 standard is available on request. Technical Details Typical values Thickness 0.15mm Breaking Load 26 N/cm Elongation 130% Adhesion Steel 3.5 N/cm Self 2.8 N/cm Copper Corrosion No Staining Flame Retardancy Self extinguishing RoHS Compliant Yes Service Temperature 0C to +70C Application Temperature +5C to +40C Storage Temperature +12C to +25C *Standard charge for certificate: 25.00. Advance Tapes International Limited, PO Box 122, Abbey Meadows, Leicester, LE4 5RA. Tel: 0116 251 0191. Fax: 0116 265 2046. www.advancetapes.com NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes.The Company reserves the right to improve products and any change in specification will result in a re-issue of the relevant `Technical Data Sheet'. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the `Technical Data Sheet'. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place. AFERA Association des Fabricants Europeens de Rubans Auto-Adhesifs.