SPEC NO: DSAD1045 REV NO: V.12A DATE: JAN/13/2012 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203002219
3.2x1.6mm SMD CHIP LED LAMP
Part Number: APTD3216EC High Efficiency Red
Features
z3.2mmX1.6mm SMT LED, 1.8mm thickness.
zLow power consumption.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage: 2000pcs / reel .
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1045 REV NO: V.12A DATE: JAN/13/2012 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203002219
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
High Efficiency Red (GaAsP/GaP) Water Clear
30 55
40°
*20 *50
APTD3216EC
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 *627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 *617 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR=5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
*Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAD1045 REV NO: V.12A DATE: JAN/13/2012 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203002219
High Efficiency Red APTD3216EC
SPEC NO: DSAD1045 REV NO: V.12A DATE: JAN/13/2012 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203002219
APTD3216EC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAD1045 REV NO: V.12A DATE: JAN/13/2012 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203002219
PACKING & LABEL SPECIFICATIONS APTD3216EC
