HMC204 v04.0907 FREQUENCY MULTIPLIERS - PASSIVE - CHIP 2 Typical Applications Features The HMC204 is suitable for: Conversion Loss: 17 dB * Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 38 dB * LMDS, VSAT, and Point-to-Point Radios Passive: No Bias Required * Test Equipment Functional Diagram General Description The HMC204 is a passive miniature frequency doubler in a MMIC die. Suppression of undesired fundamental and higher order harmonics is 38 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, no DC bias, and no measurable additive phase noise onto the multiplied signal. Electrical Specifi cations, TA = +25 C, As a Function of Drive Level Input = +10 dBm Parameter Frequency Range, Input Frequency Range, Output Conversion Loss 2 - 10 GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Min. Typ. Input = +12 dBm Max. Min. Typ. Input = +15 dBm Max. Min. Typ. 5.5 - 7.5 5.0 - 8.0 4.0 - 8.0 11.0 - 15.0 10.0 - 16.0 8.0 - 16.0 17 20 17 20 18 Max. Units GHz GHz 21 dB FO Isolation (with respect to input level) 41 45 dB 3FO Isolation (with respect to input level) 42 46 dB 4FO Isolation (with respect to input level) 35 38 dB For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC204 v04.0907 GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Isolation @ +15 dBm Drive Level* 0 0 -5 -10 2 -10 -15 -20 -25 +25 C -55 C +85 C -30 -30 -40 -50 -60 -70 -80 -35 Fo 3Fo 4Fo -90 -40 -100 3 4 5 6 7 8 9 0 5 10 INPUT FREQUENCY (GHz) 15 20 25 30 35 FREQUENCY (GHz) *With respect to input level Output Return Loss for Several Input Frequencies 0 0 -5 -5 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss vs. Drive Level -10 Pin = + 8 dBm Pin = +10 dBm Pin = +12 dBm Pin = +14 dBm -15 -20 -10 -15 4 GHz In 6 GHz In 8 GHz In -20 3 4 5 6 7 8 9 INPUT FREQUENCY (GHz) 8 10 12 14 16 OUTPUT FREQUENCY (GHz) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. FREQUENCY MULTIPLIERS - PASSIVE - CHIP -20 ISOLATION (dB) CONVERSION GAIN (dB) Conversion Gain vs Temperature @ +15 dBm Drive Level 2 - 11 HMC204 v04.0907 GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Conversion Gain @ 25C vs. Drive Level 0 0 -10 RETURN LOSS (dB) CONVERSION GAIN (dB) -5 -15 -20 -25 +10 dBm +12 dBm +15 dBm +8 dBm -30 -10 -15 +8 dBm +10 dBm +12 dBm -20 -40 3 4 5 6 7 8 8 9 10 12 Conversion Gain @ -55C vs. Drive Level 16 Output Return Loss with 6 GHz Input 0 0 -5 -10 RETURN LOSS (dB) CONVERSION GAIN (dB) 14 OUTPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) -15 -20 -25 -30 +8 dBm +10 dBm +12 dBm +15 dBm -35 +8 dBm +10 dBm +12 dBm -5 -10 -15 -20 -40 3 4 5 6 7 8 8 9 10 12 14 16 OUTPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) Conversion Gain @ +85C vs. Drive Level Output Return Loss with 8 GHz Input 0 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 +8 dBm +10 dBm +12 dBm +15 dBm -35 +8 dBm +12 dBm +10 dBm -5 -10 -15 -20 -40 3 4 5 6 7 8 9 INPUT FREQUENCY (GHz) 2 - 12 -5 -35 CONVERSION GAIN (dB) FREQUENCY MULTIPLIERS - PASSIVE - CHIP 2 Output Return Loss with 4 GHz Input 8 10 12 14 16 OUTPUT FREQUENCY (GHz) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC204 v04.0907 GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Absolute Maximum Ratings +27 dBm Storage Temperature -65 to +150 C Operating Temperature -55 to +85 C 2 FREQUENCY MULTIPLIERS - PASSIVE - CHIP Input Drive ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Die Packaging Information [1] Standard Alternate WP-2 (Waffle Pack) [2] [1] Refer to the "Packaging Information" section for die packaging dimensions. [2] For alternate packaging information contact Hittite Microwave Corporation. NOTES: 1. DIE THICKNESS IS 0.100 [0.004], BACKSIDE IS GROUND 2. BOND PADS ARE 0.100 [0.004] SQUARE 3. BOND PAD SPACING, CTR-CTR: 0.150 [0.006] 4. ALL DIMENSION IN INCHES [MILLIMETERS] 5. ALL TOLERANCES ARE 0.025 [0.001] 6. BOND PAD METALLIZATION: GOLD 7. BACKSIDE METALLIZATION: GOLD For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 2 - 13 HMC204 v04.0907 GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Pad Description FREQUENCY MULTIPLIERS - PASSIVE - CHIP 2 2 - 14 Pad Number Function Description 1 RFIN Pad is DC coupled and matched to 50 Ohms. 2 RFOUT Pad is AC coupled and matched to 50 Ohms. Die Bottom GND Die bottom must be connected to RF/DC ground. Interface Schematic For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC204 v04.0907 GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT Handling Precautions Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry nitrogen environment. Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems. Static Sensitivity: Follow ESD precautions to protect against ESD strikes. Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up. General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the chip may have fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers. Mounting The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive epoxy. The mounting surface should be clean and flat. Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer's schedule. Wire Bonding Ball or wedge bond with 1.0 diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of 150 C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package. RF bonds should be as short as possible. For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 2 FREQUENCY MULTIPLIERS - PASSIVE - CHIP Follow these precautions to avoid permanent damage. 2 - 15