https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 6.2 mm PLC basic terminal block for TTL signal with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage TTL (5 V DC) Your advantages 6.2 mm narrow design width Screw and spring-cage connection RT III protection Safe isolation according to EN 50178 (VDE 0160) 4 kVrms electrical isolation between coil and contact Status indicator Bridging options Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356155212 Weight per Piece (excluding packing) 31.700 g Custom tariff number 85366990 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 03/29/2021Page1/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Technical data Dimensions Width 6.2 mm 6.2 mm Height 80 mm 80 mm Depth 94 mm 94 mm Ambient conditions Ambient temperature (operation) -20 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Input data Rated control circuit supply voltage US 5 VDC Voltage range with reference to US 0.9 ... 1.2 Rated control supply current IS 41 mA Rated actuating voltage UC 5 VDC (TTL) Voltage range with reference to UC 0.9 ... 1.2 Rated actuating current IC 2.5 mA Rated actuating voltage UC 5 VDC (TTL) Rated actuating current IC 2.5 mA Rated control circuit supply voltage US 5 VDC Voltage range with reference to US 0.9 ... 1.2 Rated control supply current IS 11.5 mA Switching level 1 signal ("H") (TTL signal) > 2 VDC Switching level 0 signal ("L") (TTL signal) < 0.8 VDC Nominal input voltage UN 5 VDC (TTL) Surge voltage protection > 6.5 V Transmission frequency 1000 Hz Surge voltage protection > 6.5 V Output data Fitting of components REL-MR-4,5DC/21 Contact type Single contact, 1 N/O contact Contact material AgSnO Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 100 mA) Limiting continuous current 6A Maximum inrush current on request 03/29/2021Page2/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Technical data Output data Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity min. 120 mW Fitting of components REL-MR-4,5DC/21AU Contact type Single contact, 1 N/O contact Contact material AgSnO, hard gold-plated Note If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact. Maximum switching voltage 30 VAC 36 VDC Minimum switching voltage 100 mV (at 10 mA) Limiting continuous current 50 mA Maximum inrush current 50 mA Min. switching current 1 mA (at 24V) Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Switching capacity min. 100 W Fitting of components OPT-5DC/48DC/100 Maximum switching voltage 48 VDC Minimum switching voltage 3 VDC Limiting continuous current 100 mA Output circuit 2-conductor, floating Protective circuit Reverse polarity protection Surge protection Voltage drop at max. limiting continuous current <1V Fitting of components OPT-5DC/24DC/2 Maximum switching voltage 33 VDC Minimum switching voltage 3 VDC Limiting continuous current 3A Maximum inrush current 15 A (10 ms) Output circuit 2-conductor, floating Protective circuit Reverse polarity protection Surge protection 03/29/2021Page3/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Technical data Output data Voltage drop at max. limiting continuous current < 200 mV General Operating mode 100% operating factor Color gray Flammability rating according to UL 94 V0 (Housing) Mounting position any Assembly instructions In rows with zero spacing Connection data Connection name Input side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm 0.2 mm ... 2.5 mm (Single ferrule) 2x 0.5 mm ... 1.5 mm (TWIN ferrule) Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Output side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm 0.2 mm ... 2.5 mm (Single ferrule) 2x 0.5 mm ... 1.5 mm (TWIN ferrule) Conductor cross section AWG 26 ... 14 Standards and Regulations Connection in acc. with standard CUL Conformance/approvals Designation Corrosive gas test Identification ISA-S71.04. G3 Harsh Group EN60068-2-60 Environmental Product Compliance REACh SVHC Lead 7439-92-1 03/29/2021Page4/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Diagram Circuit diagram 13+ GND 14 UVN IN Max. interrupting rating Circuit diagram 13+ GND 14 UVN IN Classifications eCl@ss eCl@ss 10.0.1 27371603 eCl@ss 11.0 27371603 eCl@ss 4.0 27371100 eCl@ss 4.1 27371100 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371603 03/29/2021Page5/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Classifications eCl@ss eCl@ss 9.0 27371603 ETIM ETIM 2.0 EC001456 ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 6.0 EC001456 ETIM 7.0 EC001456 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122326 UNSPSC 18.0 39122335 UNSPSC 19.0 39122335 UNSPSC 20.0 39122335 UNSPSC 21.0 39122335 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / cULus Recognized / cULus Listed Ex Approvals Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 03/29/2021Page6/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Approvals UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 EAC RU D-DE.B*00573/18 cULus Recognized cULus Listed Accessories Accessories Bridge Continuous plug-in bridge-FBST 500-PLC RD-2966786 Continuous plug-in bridge, length: 500 mm, color: red 03/29/2021Page7/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories Continuous plug-in bridge-FBST 500-PLC BU-2966692 Continuous plug-in bridge, length: 500 mm, color: blue Continuous plug-in bridge-FBST 500-PLC GY-2966838 Continuous plug-in bridge, length: 500 mm, color: gray Single plug-in bridge-FBST 6-PLC RD-2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red Single plug-in bridge-FBST 6-PLC BU-2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue Single plug-in bridge-FBST 6-PLC GY-2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray 03/29/2021Page8/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories Single plug-in bridge-FBST 8-PLC GY-2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 03/29/2021Page9/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 03/29/2021Page10/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver 03/29/2021Page11/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver Labeled terminal marker 03/29/2021Page12/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories Zack marker strip-ZB 6 CUS-0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 03/29/2021Page13/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories Marker for terminal blocks-ZB 6,LGS:U-N-1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6 CUS-0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6 CUS-0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Partition plate Separating plate-PLC-ATP BK-2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Power module Power terminal block-PLC-ESK GY-2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 03/29/2021Page14/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories Screwdriver tools Screwdriver-SZF 1-0,6X3,5-1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking Zack marker strip-ZB 6:UNBEDRUCKT-1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6-0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6-0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Necessary add-on products 03/29/2021Page15/16 https://www.phoenixcontact.com/us/products/2982689 Relay base-PLC-BSC-TTL/1-2982689 Accessories Single relay-REL-MR- 4,5DC/21AU-2961370 Plug-in miniature power relay, with multi-layer gold contact, 1 changeover contact, input voltage 4.5 V DC Single relay-REL-MR- 4,5DC/21-2961367 Plug-in miniature power relay, with power contact, 1 changeover contact, input voltage 4.5 V DC Miniature solid-state relay-OPT- 5DC/ 48DC/100-2967992 Plug-in miniature solid-state relay, input solid-state relay, 1 N/O contact, input voltage: 5 V DC Miniature solid-state relay-OPT- 5DC/ 24DC/ 2-2967989 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input voltage: 5 V DC Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 03/29/2021Page16/16