Panasonic Surface mount type Aluminum Electrolytic Capacitor ( V type FK series ) TENTATIVE New Vertical chip type FK series Surface Mount Low impedance High Reliability For Power Supply Features Low impedance (40 to 60% lower than FC series) Miniaturization (30 to 50% less than FC series) Life time : 2000 to 5000 hours at 105C Specifications Category Temperature Range -55 to +105C Rated W. V. Range 6. 3 to 100 V. DC Nominal Capacitance Range 3.3 to 6800uF Capacitance Tolerance Leakage Current +-20% ( 120 Hz/20C ) I = 0. 01CV or 3 (uA ) ( Whichever is greater ) After application of rated working voltage for 2 minutes at +20C W.V. (V.DC) Dissipation Factor (tan d) tan d (max) 6.3 10 16 25 35 50 63 80 100 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 0.07 Add 0.02 per 1000uF for products of 1000uF or more. ( 120 Hz/20C ) After the life test with DC rated working voltage at +105 +-2C for 5000 hours (dia.4 to 10 is 2000 hours), the capacitors shall meet the specified below. Post-test requirements at +20 C. Capacitance Change +-30% of the initially measured value Endurance Shelf Life Tan d Under 200% of the initially specified value DC Leakage Current Under the initially specified value After storage for 1000 hours at +105 +-2 C with no voltage applied and then being stabilized at +20C, capacitors shall meet the limits specified in "Endurance". Design,Specifications are subject to change without notice.Ask factory for technical specifications before purchase and/or use. VFK Tentative 010131.doc 1 Panasonic Surface mount type Aluminum Electrolytic Capacitor ( V type FK series ) Description of Part Number E E V F Common code Series code Common code W. V. code W. V. ( V ) K j A 6.3 10 W. V. code Capacitance code Suffix V type C 16 E 25 V 35 H 50 J 63 K 80 R: W = 12mm P: W = 16mm P: W = 24mm Q: W = 32mm M: W = 44mm 2A 100 4 x 5.8(B), 5 x 5.8 (C) 6.3 x 5.8(D), 8x6.2 (E) 8x10.2(F), 10x10.2(G) 12.5x13.5(H13) 16x16.5(J16), 18x16.5 (K16) Capacitance : The first 2 figures are actual values and third denotes the number of zeros. "R" denotes the decimal point and all figures are the actual number with"R". Examples ; 4. 7uF:4R7 10uF:100 100uF:101 1000uF:102 Not to scale < Dia. 4 to 10 > A -0.2 +0.2 0.3 max (P) H FK FK Dia. -0.5 +0.5 K Working Voltage mark Series Capacitance(uF) (I) < Dia. 12.5 to 18 > L (I) Dimensions ( mm ) W (Abbreviate to date code) ( ) Reference size [mm] Working voltage mark j 6. 3V A 10V C 16V E 25V V 35V H 50V J 63V K 80V 2A 100V Size code D B 4 L 5.8 -0.3 5 5.8 -0.3 6.3 5.8 -0.3 C D +0.3 8 F 8 10.2 -0.3 G 10 10.2 -0.3 12.5 13.5 -0.5 J16 16 16.5 -0.5 K16 18 16.5 -0.5 H13 I 4.3 5.5 1.8 W 0.65 -0.1 2.2 0.65 -0.1 2.6 0.65 -0.1 6.6 +0.3 -0.3 +0.3 E H max 5.3 +0.3 6.2 A +0.3 +0.3 +0.5 +0.5 7.8 +0.1 +0.1 0.65 -0.1 +0.1 8.3 9.5 3.4 8.3 10.0 3.4 0.9 -0.3 10.3 12.0 3.5 0.9 -0.3 4.7 0.9 -0.3 13.5 +0.5 6.5 +0.1 15.0 +0.3 +0.3 +0.3 17.0 19.0 5.5 1.2 -0.3 19.0 21.0 6.7 1.2 -0.3 +0.3 +0.3 P 1.0 K 0.35 -0.20 1.5 0.35 -0.20 1.8 0.35 -0.20 2.2 0.35 -0.20 3.1 0.70 -0.20 4.6 0.70 -0.20 4.4 0.70 -0.30 6.7 0.70 -0.30 6.7 0.70 -0.30 +0.15 +0.15 +0.15 +0.15 +0.20 +0.20 +0.30 +0.30 +0.30 Design,Specifications are subject to change without notice.Ask factory for technical specifications before purchase and/or use. VFK Tentative 010131.doc 2 Panasonic Surface mount type Aluminum Electrolytic Capacitor ( V type FK series ) Case Size, Capacitance, Impedance and Ripple current Table. at + 20C 100( kHz ) Impedance/ESR : (ohm) Ripple Current : ( mA rms ) at +105C 100( kHz ) 6.3 10 16 W. V. (V)DC Impedance Ripple Impedance Ripple Impedance Ripple Size /ESR Cap. (uF) current Size /ESR current Size /ESR current 10 22 33 47 100 220 330 470 1000 1500 2200 3300 4700 6800 W. V. (V) DC Cap. (F) 4. 7 10 22 33 47 100 220 330 390 470 680 1000 1500 2200 B 1.35 C(B) D(C) D E F F G 0.7(1.35) 0.36(0.7) 0.36 0.26 0.16 0.16 0.08 H13 J16 0.06 0.035 25 Impedance Size /ESR 90 90 160(90) 160(90) 240 300 600 600 850 E F F G 0.26 0.16 0.16 0.08 300 600 600 850 H13 0.06 1100 J16 K16 0.035 0.033 1800 2060 1100 1800 35 Ripple Impedance Size current /ESR 1.35 0.7 0.36(0.7) 0.36 0.26 0.16 0.16 G 0.08 850 H13 0.06 1100 0.035 1.35 0.7(1.35) 240(160) B C D(C) D E F F J16 B C(B) 90 160 240(160) 240 300 600 600 Ripple current B C(B) C D D F F G 1.35 0.7(1.35) 0.7 0.36 0.36 0.16 0.16 0.08 90 160(90) 160 240 240 600 600 850 H13 H13 0.06 0.06 1100 1100 J16 0.035 1800 B C(B) 1.35 0.7(1.35) 90 160(90) D(C) D E F F 0.36(0.7) 0.36 0.26 0.16 0.16 240(160) H13 0.06 1100 J16 K16 0.035 0.033 1800 2060 50 Impedance Size /ESR 240 300 600 600 Ripple current B D(C) D E E F G H13 H13 2.9 0.88(1.52) 0.88 0.68 0.68 0.34 0.18 0.12 0.12 60 165(85) 165 195 195 350 670 900 900 J16 0.073 1610 1800 Design,Specifications are subject to change without notice.Ask factory for technical specifications before purchase and/or use. VFK Tentative 010131.doc 3 Panasonic Surface mount type Aluminum Electrolytic Capacitor ( V type FK series ) Case Size, Capacitance, impedance and ripple current Table. Impedance : (ohm) at +20C 100( kHz ) Ripple current : ( mA rms ) at +105C 100( kHz ) 63 80 100 W. V. (V)DC Impedance Ripple Impedance Ripple Impedance Ripple Size /ESR Cap. (uF) current Size /ESR current Size /ESR current 3.3 4.7 10 22 33 47 68 100 150 220 330 470 680 C D E F F 3.0 1.5 1.2 0.65 0.65 50 80 120 250 250 G 0.35 400 H13 0.16 800 J16 K16 0.082 0.080 1410 1690 Size code B : Dia. 4 x 5.8L E : Dia. 8 x 6.2L H13 : Dia. 12.5 x 13.5L C D E F F G 5.0 3.0 1.3 1.3 1.3 0.7 25 40 130 130 130 200 H13 H13 0.32 0.32 500 500 J16 K16 0.17 0.153 793 917 H13 H13 0.32 0.32 500 500 J16 K16 0.17 0.153 793 917 C : Dia. 5 x 5.8L D : Dia. 6.3 x 5.8L F : Dia. 8 x 10. 2L G : Dia. 10 x 10. 2L J16: Dia. 16 x 16.5LK16: Dia. 18 x 16.5L [mm] ( ):Miniaturization type Design,Specifications are subject to change without notice.Ask factory for technical specifications before purchase and/or use. VFK Tentative 010131.doc 4 Panasonic Surface mount type Aluminum Electrolytic Capacitor ( V type FK series ) Reflow Soldering At reflow soldering, the temperature at surface of the capacitor shall not exceed the allowable range described below. Temperature on capacitor surface(C) 250 5sec Peak temperature 200 150 below 160 C Duration(S) (temp > 200 C) 120sec 100 50 Time(S) < Diagram 2 > Peak temperature/Duration(temp>200 C(S)) Peak temperature/Duration (temp>200 C(S)) 240 Peak temperature(C) Peak temperature(C) 240 230 220 210 0 10 20 30 40 50 230 220 210 0 60 Duration(temp>200C(S)) 10 20 30 40 50 60 Duration(temp>200 C(S)) Reflow soldering of size code B, C, and D Reflow soldering of size code E, F, G, H13,J16 and K16 For reflow ,use a thermal condition system such as infrared reduction(IR)or hot blast. Vapor phase soldering systems (VPS) are not recommended. The contents of this tentative catalog are subject of change without notice in advance. TEL:0774-33-3209,4466 FAX:0774-32-3189 Matsushita Electronic Components Co., Ltd.Capacitor Division. TEL +81-774-33-3209 ( Dial In ) FAX +81-774-32-3189 Design,Specifications are subject to change without notice.Ask factory for technical specifications before purchase and/or use. VFK Tentative 010131.doc 5