Data sheet
Creation date December 18, 2018 12:57:29 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1
OMNIMATE Signal - series LMF
LMF 5.08/06/180 3.5SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
General ordering data
Type LMF 5.08/06/180 3.5SN BK BX
Order No. 1426110000
Version PCB terminal, 5.08 mm, No. of poles: 6, 180°,
Solder pin length (l): 3.5 mm, tinned, Black, PUSH
IN, Clamping range, max. : 2.5 mm², Box
GTIN (EAN) 4050118229905
Qty. 45 pc(s).
Product data IEC: 400 V / 24 A / 0.2 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12
Packaging Box
The new LMF allows us to meet the current market
requirements for a PCB terminal with PUSH IN connection
system for wire cross-sections up to 2.5 mm2
• PUSH IN connection system
• LMF with pusher for opening the terminal point
• LMFSwithout pusher, the terminal point is opened with
a screwdriver
• Integrated test point
• 90° and 180° wire outlet direction
Data sheet
OMNIMATE Signal - series LMF
LMF 5.08/06/180 3.5SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 18, 2018 12:57:29 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 33.1 mm Width (inches) 1.303 inch
Height 22.7 mm Height (inches) 0.894 inch
Height of lowest version 19.2 mm Depth 14.8 mm
Depth (inches) 0.583 inch Net weight 9.243 g
System parameters
Product family OMNIMATE Signal - series
LMF
Wire connection method
PUSH IN
Mounting onto the PCB THT solder connection Conductor outlet direction 180°
Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch
No. of poles 6 Fitted by customer No
Max. adjacent poles per row 24 Solder pin length (l) 3.5 mm
Solder pin dimensions d = 0.8 mm Solder eyelet hole diameter (D) 1.1 mm
Solder eyelet hole diameter tolerance (D)+ 0,1 mm Number of solder pins per pole 2
Screwdriver blade 0.6 x 3.5 Screwdriver blade standard DIN 5264
Stripping length 10 mm L1 in mm 25.4 mm
L1 in inches
1 inch
Touch-safe protection acc. to DIN VDE
0470 IP 20
Touch-safe protection acc. to DIN VDE
57 106 Safe from finger touch
Material data
Insulating material Wemid (PA) Colour Black
Colour chart (similar) RAL 9011 CTI ≥ 600
Insulation resistance ≥ 108 Ω UL 94 flammability rating V-0
Contact material CuSn Contact surface tinned
Coating 4-6 μm SN Tinning type matt
Layer structure of solder connection 4-6 µm Sn matt Storage temperature, min. -25 °C
Storage temperature, max. 55 °C Max. relative humidity during storage 80 %
Operating temperature, min. -50 °C Operating temperature, max. 120 °C
Temperature range, installation, min. -25 °C Temperature range, installation, max. 120 °C
Conductors suitable for connection
Clamping range, min. 0.12 mm² Clamping range, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 24
Wire connection cross section AWG,
max. AWG 12
Solid, min. H05(07) V-U 0.2 mm² Solid, max. H05(07) V-U 2.5 mm²
Flexible, min. H05(07) V-K 0.2 mm² Flexible, max. H05(07) V-K 2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min. 0.25 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max. 2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min
0.25 mm²
w. wire end ferrule, DIN 46228 pt 1,
max. 2.5 mm²
Plug gauge in accordance with EN
60999 a x b; ø 2.4 mm x 1.5 mm
Data sheet
OMNIMATE Signal - series LMF
LMF 5.08/06/180 3.5SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 18, 2018 12:57:29 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. no. of poles
(Tu=20°C) 24 A
Rated current, max. no. of poles
(Tu=20°C) 24 A
Rated current, min. no. of poles
(Tu=40°C) 24 A
Rated current, max. no. of poles
(Tu=40°C) 24 A
Rated voltage for surge voltage class /
pollution degree II/2 400 V
Rated voltage for surge voltage class /
pollution degree III/2 320 V
Rated voltage for surge voltage class /
pollution degree III/3 250 V
Rated impulse voltage for surge voltage
class/ pollution degree II/2 4 kV
Rated impulse voltage for surge voltage
class/ pollution degree III/2 4 kV
Rated impulse voltage for surge voltage
class/ contamination degree III/3 4 kV
Short-time withstand current resistance
3 x 1s with 120 A
Rated data acc. to CSA
Rated voltage (Use group B) 300 V Rated voltage (use group D) 300 V
Rated current (use group B) 20 A Rated current (use group D) 10 A
Wire cross-section, AWG, min. AWG 24 Wire cross-section, AWG, max. AWG 12
Rated data acc. to UL 1059
Rated voltage (use group B) 300 V Rated voltage (use group D) 300 V
Rated current (use group B) 20 A Rated current (use group D) 10 A
Wire cross-section, AWG, min. AWG 24 Wire cross-section, AWG, max. AWG 12
Packaging
Packaging Box VPE length 350 mm
VPE width 135 mm VPE height 20 mm
Classifications
ETIM 3.0 EC001284 ETIM 4.0 EC002643
ETIM 5.0 EC002643 ETIM 6.0 EC002643
eClass 6.2 27-26-11-01 eClass 7.1 27-44-04-01
eClass 8.1 27-44-04-01 eClass 9.0 27-44-04-01
eClass 9.1 27-44-04-01
Data sheet
OMNIMATE Signal - series LMF
LMF 5.08/06/180 3.5SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 18, 2018 12:57:29 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4
Notes
Notes • Additional colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Wire end ferrule with plastic collar to DIN 46228/4
• P on drawing = pitch
• Rated data refer only to the component itself. Clearance and creepage distances to other components are to
be designed in accordance with the relevant application standards.
• The test point can only be used as potential-pickup point.
IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized
standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties
in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Approvals
Approvals
ROHS Conform
Downloads
Brochure/Catalogue FL DRIVES EN
FL DRIVES DE
Engineering Data STEP
Data sheet
OMNIMATE Signal - series LMF
LMF 5.08/06/180 3.5SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date December 18, 2018 12:57:29 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 5
Graph Graph
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
260
240
220
200
180
160
140
120
100
80
60
40
20
00 20 40 60 80 100 120 140 160 180 200 220 240
time [s]
Temperature [°C]
Preheating
Cooling rate < 6 °K/s
250 °C
260 °C
Heating rate < 3 °K/s
255 °C
Typical process
Process limits
Temperature on board
Total contact time max. 10 sec.
appr. 150°C
260
240
220
200
180
160
140
120
100
80
60
40
20
00 20 40 60 80 100 120 140 160 180 200 220 240
time [s]
Temperature [°C]
Preheating
Cooling rate < 6 °K/s
250 °C
260 °C
Contact time appr. 3 sec.
Typical process
Prozess limits
Temperature on board
Heating rate < 3 °K/s
255 °C
appr. 150 °C
Wave soldering profiles
Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included
two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are
qualified.
When choosing a suitable profile for your application, the following factors also need to be considered:
- PCB thickness
- Proportion of Cu in the layers
- Single/double-sided assembly
- Product range
- Heating and cooling rates
The single and double wave profiles each indicate the recommended operating range, including the maximum
soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above
maximum profile.
Wave Solder Profile
Recommended wave solderding profiles
We reserve the right to make technical changes.
Single Wave:
Double Wave:
