Optimal IV(R) Star Series Mono-Color, Multi-LED Recessed Die Design (RDD) OV4Zxxxx * Designed for 4 1-watt chips in recessed cavity with an optical grade 5mm diameter lens Exceptional thermal resistance (1.8C/W junction to * Product Photo Here heatsink) * * Solder Pads Au Plated Locating slots for M3 screws Part Number Color Material OV4ZAAAA Amber AllnGaP OV4ZBBBB Blue InGaN OV4ZGGGG Green InGaN OV4ZRRRR Red AllnGaP Beam Angle Typ. Dominant Wavelength (nm) 590 60 Typical Luminous Flux (lm) 350 mA 700mA 109 170 Typical Forward Voltage (VF) 350 mA 700mA 8.6 9.35 458 29 49 12.6 14.2 532 173 272 13.1 14.6 625 102 183 8.7 9.55 Notes: RoHS * * * * Test conditions: IF=350 mA / 700 mA; TJ @ 25C Polarity Pads opposite for Red / Amber vs. Blue / Green All dimensions are in inches & [millimeters]. Additional heat sinking required. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B 05/2011 Page 1 of 3 Optimal IV(R) COS Star OV4Zxxxx Series Absolute Maximum Ratings DC Forward Current /die 700 mA Peak Pulsed Forward Current 1 6.0 A Reverse Voltage 5V Maximum Allowable Junction Temperature2 130 C Storage and Operating Temperature -50 ~ +100 C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Notes: 1. Pulse width 1 ms maximum. Duty cycle 1/16. 2. Thermal Resistance junction to Board (Tjhs) is <2 C/W Electrical Characteristics (IF = 350 mA , TJ = 25 C) PARAMETER TYP MAX UNITS Forward Voltage (Amber) 8.6 10.0 V Forward Voltage (Blue) 12.6 13.7 V Forward Voltage (Green) 13.1 14.1 V Forward Voltage (Red) 8.7 10.1 V VF--Temperature Co-efficient (Amber & Red) -6.42 ---- mV/C VF--Temperature Co-efficient (Blue) -4.81 ---- mV/C VF--Temperature Co-efficient (Green) -4.95 ---- mV/C SYMBOL VF Optical Characteristics (IF = 350 mA, TJ = 25 C) COLOR LUMINOUS FLUX (lm) @ IF = 350mA DOMINANT WAVELENGTH SPECTRAL HALF WIDTH DOMINANT WAVELENGTH TEMPERATURE COEFFICIENT MIN TYP MIN TYP MAX Amber 55 109 585 590 595 16 nm 0.07 nm/ C Blue 20 29 455 458 460 20 nm 0.04 nm/ C Green 110 173 530 532 535 40 nm 0.04 nm/ C Red 65 102 620 625 630 37 nm 0.05 nm/ C Packaging: 10 Optimal IV(R) stars per tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B 05/2011 Page 2 of 3 Optimal IV(R) COS Star OV4Zxxxx Series Relative Spectral Responses Dom inant Wavelength vs IF 630 0.035 0.03 0.025 red 0.02 green 0.015 amber blue 0.01 0.005 0 400 500 600 700 Dominant Wavelength (nm) Relative Spectral Responses (W/sr*nm) 650 800 610 590 blue 570 green 550 amber 530 red 510 490 470 450 Wavelengths (nm ) 0 200 400 600 800 IF (m A) Total Lum inous Flux vs IF 400 1400 350 1200 300 blue 1000 green 800 amber 600 TLF (lm s) IF (mA) IF vs VF 1600 red blue 250 green 200 amber 150 400 100 200 50 red 0 0 0 3 5 0 8 10 13 15 18 20 200 400 600 800 1000 1200 1400 IF (m A) VF (V) Duty Ratio vs. Allow able Forw ard Current T = 1 m s & variable PW Derating Curve Allowable IF Drive (mA) Allowable Pulsed Forward Current I FP [mA] 800 6000 5000 4000 TA = 25C 3000 2000 1000 0 1 10 Duty Ratio (%) 100 700 600 Ta = 25oC 500 400 300 200 100 0 0 50 100 Junction Tem perature( oC) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B 05/2011 Page 3 of 3