Flat Cable EMI Suppression Cores (2643171051)
Part Number: 2643171051
43 SPLIT FLAT CABLE CORE
Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
Flat cable suppression core can accommodate multi- conductors flat cables, in widths from 12.7 mm (0.500) up to 77 mm
(3.0). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz to hundreds
of MHz.
Clip Part Number: 0199001401 , 0199016051
Our Expanded Cable & Suppressor Kit (part number 0199000005) contains a selection of these flat cable cores and clips.
Flat Cable Cores are available in selected sizes in the Flex Circuit & Ribbon Cable Core Kit (part number 0199000038).
Assembly clips are available for most of the split flat cable cores. See section Flat Cable Cores Assembly clips.
Catalog Drawing
3D Model
Weight: 14 (g)
Chart Legend
+ Test frequency
•For assembly clips see Flat Cable Cores Assembly Clips
Typical Impedance (Ω)
10 MHz 39
25 MHz+59
100 MHz+120
250 MHz 210
Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified
for the + marked frequencies. The minimum impedance is listed on our catalog drawing.
Dim mm mm tol nominal inch inch misc.
A 38.1 ±1.00 1.5 _
B 26.65 ±0.75 1.049 _
C 12.7 ±0.40 0.5 _
D 6.35 ±0.25 0.25 _
E 0.85 ±0.20 0.033 _
Cable Information
Max
Diameter Max
Dimension Solid
Equivalent Flat Cable
Cores
0
025.90 x 1.30 _ -