T3DSO1102 - Teledyne LeCroy Inc

T3DSO1000 / T3DSO1000A Data Sheet

Oscilloscopes

Debug with Conﬁ dence

100 MHz – 350 MHz

Key Speciﬁ cations

Bandwidth 100 MHz, 200, 350 MHz

Channels 2 or 4

Memory up to 14 Mpts/Ch (28 Mpts interleaved)

Sample Rate up to 1 GS/s / 2 GS/s interleaved

Display 7" Bright TFT LCD (800 x 480)

Connectivity USB Host, USB Device, LAN

Tools for Improved Debugging

●Long Capture – Up to 28Mpts interleaved. Capture more time and show more waveform detail.

●Math and Measure – 7 basic math functions plus FFT

and 38 automatic measurement parameters.

Extract results from waveforms and measurements.

●Connectivity – USB for mass storage, printing and

PC control, plus LAN for fast data transfer.

Save data for external analysis and screen images

for reports.

●Serial Bus Trigger and Decode – I2C, SPI, UART,

RS232, CAN, LIN.

Debug serial buses directly in your Oscilloscope.

●Waveform Sequence Recorder – record and play back

up to 80,000 waveforms.

Replay the changing waveform history.

●Optional MSO – 16 Digital Channels

(4 channel and A series only).

Add mixed signal debugging to your Oscilloscope.

PRODUCT OVERVIEW

The T3DSO1000 series employs a new generation of high

speed display technology that provides excellent signal

clarity,  delity and performance. The system noise floor is

also lower than similar products in the industry. It comes

with a minimum vertical input range of 500 uV/div, an

innovative digital trigger system with high sensitivity and

low jitter, and a waveform capture rate of 400,000 frames/

sec (sequence mode). The T3DSO1000 also employs

a256-level intensity grading display function and a color

temperature display mode not found in other models in

this class. Teledyne Test Tools latest oscilloscope offering

supports multiple powerful triggering modes including

serial bus triggering. Serial bus decoding for IIC, SPI, UART,

CAN, LIN bus types is included. The models also include

History waveform recording, and sequential triggering

that enable extended waveform recording and analysis.

T3DSO1102: 2 Channel 100 MHz

T3DSO1104: 4 Channel 100 MHz

T3DSO1202A: 2 Channel 200 MHz

T3DSO1204: 4 Channel 200 MHz

T3DSO1302A: 2 Channel 350 MHz

Key Features

●100 MHz, 200 MHz and 350 MHz bandwidth models

●Two channel series have one ADC, four channel series

have two ADCs. When all channels are enabled, each

channel has a maximum sample rate of 500 MSa/s

(1 Gsa/s for the A series). When a single channel

per ADC is active, it has sample rate of 1 GSa/s

(2 Gsa/s for the A Series)

●The newest generation of high speed display

technology

› Waveform capture rate up to 100,000 wfm/s

(normal mode), and 400,000 wfm/s (sequence

mode)

› Supports 256-level intensity grading and color

display modes Record length up to 28 Mpts

› Digital trigger system

Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel

models are available with 100 MHz, 200 MHz and 350 MHz analog bandwidths, a single ADC with up to 2 GSa/s

maximum sample rate, and memory up to 28 Mpts. The four channel scope is available in 100 and 200 MHz models

and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel

has sample rate of 500 MSa/s, or 1 GS/s for the A series, and a standard record length of 7 Mpts, or 14 Mpts for the

A Series. When only a single channel per ADC is active, the maximum sample rate and the maximum record length are

doubled.

For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.

Another powerful addition is the new 1millionpoint

FFT math function that gives the T3DSO1000 very high

frequency resolution when observing signal spectra. The

new digital design also includes a hardware co-processor

that delivers measurements quickly and accurately

without slowing acquisition and front-panel response.

The features and performance of Teledyne Test Tools

T3DSO1000 family cannot be matched in this price class.

The four channel and A series includes even more

functions, including: searching and navigating, on-screen

Bode plot, 16 digital channels (Option), an external USB

powered 25MHz AWG module (Option), a USB WIFI

adapter (Option), and an embedded application that

allows remote control via web browser.

●Intelligent trigger: Edge, Slope, Pulse Width, Window,

Runt, Interval, Time out (Dropout), Pattern

●Serial bus triggering and decoding (Standard), supports

protocols IIC, SPI, UART, RS232, CAN, LIN

●Video trigger, supports HDTV

●Low background noise with voltage scales from

500μV/div to 10 V/div

●10 types of one-button shortcuts, supports Auto Setup,

Default, Cursors, Measure, Roll, History, Display/Persist,

Clear Sweep, Zoom and Print Segmented acquisition

(Sequence) mode, divides the maximum record length

into multiple segments (up to 80,000), according to

trigger conditions set by the user, with a very small dead

time segment to capture the qualifying event.

●History waveform record (History) function, maximum

recorded waveform length is 80,000 frames.

●Automatic measurement function for 38 parameters

as well as Measurement Statistics, Zoom, Gating,

Math, History and Reference functions

●1 Mpts FFT

●Math and measurement functions use all sampled

data points (up to 28 Mpts)

●Math functions (FFT, addition, subtraction,

multiplication,division, integration, differential, square

root)

●Preset key can be customized for user settings or

factory “defaults”

●Security Erase mode

●High Speed hardware based Pass/ Fail function

●MSO, 16 digital channels1)

●Bode plot1)

Models and key Speciﬁ cation

Model T3DSO1102

T3DSO1104

T3DSO1204 T3DSO1202A T3DSO1302A

Bandwidth 100 MHz 200 MHz 200 MHz 350 MHz

SamplingRate (Max.) Two channel series have a single 1 GSa/s

ADC, four channel series have two 1 GSa/s

ADCs. When all channels are enabled, each

channel has a maximum sample rate of

500 MSa/s. When a single channel per pair

is active, that channel has sample rate of

1GSa/s

The A series has a single 2 GSa/s ADC.

When both channels are enabled, each

channel has a maximum sample rate of

1 GSa/s. When a single channel is active,

that channel has sample rate of 2 GSa/s

Channels 4, no EXT (T3DSO1104 and T3DSO1204 four channel series)

2+EXT (T3DSO1102, T3DSO1202A and T3DSO1302A two channel series)

Memory Depth (Max.) 7 Mpts/CH (not interleave mode);

14 Mpts/CH (interleave mode)

14 Mpts/CH (not interleave mode);

28 Mpts/CH (interleave mode)

Waveform Capture Rate (Max.) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)

Trigger Type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video

Serial Trigger and decoder (Standard) IIC, SPI, UART/RS232, CAN, LIN

16 Digital Channels

(Option not available on the T3DSO1102)

Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH

USB AWG module

(Option not available on the T3DSO1102)

One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts

Bode plot

(Not available on the T3DSO1102)

Minimum start frequency of 10 Hz, minimum scan bandwidth of 500 Hz, maximum

scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth),

500 maximum scan frequency points

USB WIFI adapter

(Option not available on the T3DSO1102)

802.11b/g/b, WPA-PSK, the adapter must be purchased separately by the scope user

(TP-Link TL-WN725N)

I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Teledyne Test Tools MSO)

Probe (Std) 2/4 pcs passive probe 2 pcs passive probe

Display 7 inch TFT-LCD (800 x 480)

Weight All models except T3DSO1102: Without package 2.6 Kg; With package 3.8 Kg

T3DSO1102: Without package 2.5 Kg; With package 3.5 Kg

●Search and navigate1)

●USB AWG module1)

●USB WIFI adapter1)

●Web Browser based control1)

●Large 7 inch TFT-LCD display with 800 * 480 resolution

●Multiple interface types: USB Host, USB Device

(USB-TMC), LAN, Trigger Out

●Supports SCPI remote control commands

●Supports Multi-language display and embedded

online help

1) Not available on the T3DSO1102.

FUNCTION & CHARACTERISTICS

Front panel of T3DSO1104, T3DSO1202A,

T3DSO1204, T3DSO1302A

Front panel of T3DSO1102

●7-inch TFT-LCD display with 800 * 480 resolution

●Most commonly used functions are accessible using

10different one-button operation keys: Auto Setup,

Default, Cursor, Measure, Roll, History, Persist, Clear

●Sweep, Zoom, Print

7 inch TFT-LCD display and

10 one-button menus

When all channels are enabled, each channel

has a maximum sample rate of up to 1 GSa/s

(depending on the model)

When a single channel per pair is active,

that channel has sample rate of up to 2 GSa/s

(depending on the model)

Record Length of Up to 28 Mpts

depending on model and channels

(single channel/pair mode).

Waveform Capture Rate

Up to 400,000 wfm/s

The four channel series has two 1 GSa/s ADC chips

(channel 1 and 2 share one, channel 3 and 4 share

another), so that each channel can achieve sample rates

up to 500 MSa/s and work on bandwidths of 200 MHz

when all channels are enabled.

Using hardware-based Zoom technologies and max record

length of up to 28 Mpts, users are able to over-sample to

capture longer time periods at higher resolution and use

the zoom feature to see more details within each signal.

With a waveform capture rate of up to 400,000 wfm/s

(sequence mode), the oscilloscope can easily capture

the unusual or low-probability events.

256-Level Intensity Grading and

Color Temperature Display

History Waveforms (History) Mode and

Segmented Acquisition (Sequence)

Gate and Zoom MeasurementSerial Bus Decoding Function (Standard)

New display technology provides for fast refresh rates.

The resulting intensity-graded trace is brighter for events

that occur with more frequency and dims when the

events occur with less frequency.

Playback the latest triggered events using the history

function. Segmented memory collection will store trigger

events into multiple (Up to 80,000) memory segments,

each segment will store triggered waveforms and

timestamp each frame.

Through Gate and Zoom measurement, the user can

specify an arbitrary interval of waveform data analysis

and statistics. This helps avoid measurement errors

that can be caused by invalid or extraneous data, greatly

enhancing the measurements’ validity and flexibility.

The color temperature display is similar to the intensity-

graded trace function, but the trace occurrence is

represented by different colors (color “temperature”) as

opposed to changes in the intensity of one color. Red

colors represents the more frequent events, while blue is

used to mark points that occur lest frequently.

T3DSO1000 displays the decoding through the

events list. Bus protocol information can be quickly

and intuitively displayed in a tabular format.

True measurement to 14 M points or

28 M points depending on the model

At any one timebase, T3DSO1000 can measure using

all acquired sample points. This ensures the accuracy of

measurements while the math coprocessor decreases

measurement time and increases ease-of-use.

FUNCTION & CHARACTERISTICS

1 M points FFT 16 Digital Channels/MSO

(Option not available on the T3DSO1102)

The math co-processor enables FFT analysis of incoming

signals using up to 1 M samples per waveform. This

provides high frequency resolution with a fast refresh

rate. The FFT function also supports a variety of window

functions so that it can adapt to different spectrum

measurement needs.

16 digital channels enables users to acquire and trigger on

the waveforms then analyze the pattern, simultaneously

with one instrument. Color coded logic levels clearly

differentiate high and low states.

Hardware-Based High Speed

Pass/Fail function

The T3DSO1000 utilizes a hardware-based Pass/Fail

function, performing up to 40,000 Pass/Fail decisions

each second. Easily generate user de ned test templates

provide trace mask comparison making it suitable for

long-term signal monitoring or automated production

line testing.

Customizable Default Key

The current parameters of the oscilloscope can be

preset to Default Key through the Save menu.

Search and Navigate

(not available on the T3DSO1102)

The T3DSO1000 series can search events speci ed

by the user in a frame. It can also navigate by time

(delay position) and historical frames. Search and

Navigate is not available on the T3DSO1102.

Bode Plot (not available on the T3DSO1102) USB 25 MHz AWG Module

(Option not available on the T3DSO1102)

T3DSO1000 can control the USB AWG module, control an

independent Teledyne Test Tools T3AFG instrument, scan

an object’s amplitude and phase frequency response,

and display the data as a Bode Plot. It can also show

the result lists, and export the data to a USB disk. Not

available for the T3DSO1102.

The T3DSO1000 series supports an optional USB 25 MHz

function/arbitrary waveform generator that is operated

from the USB host connection. Functions include

Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in

waveforms. The arbitrary waveforms can be accessed

and edited by the Teledyne Test Tools PC software.

Option not available for the T3DSO1102.

Complete Connectivity

T3DSO1000 supports USB Host, USB Device (USB-TMC),

LAN(VXI-11), Pass/Fail and Trigger Out.

Back panel of

T3DSO1104,

T3DSO1202A,

T3DSO1204,

T3DSO1302A

Back panel of

T3DSO1102

Web control (not available on the T3DSO1102)

With the new embedded web server, users can control

the Oscilloscopes from a simple web page. This provides

remote troubleshooting and monitoring capabilities.

USB WiFi Adapter

(Option not available on the T3DSO1102)

WiFi control of instrumentation can provide a convenient

and safe method of con guring and collecting data.

This new feature works with a Teledyne Test Tools

approved WiFi adapter to provide wireless control and

communications with Teledyne Test Tools 4 channel

scopes. Option not available for the T3DSO1102.

The approved adapter is the TP-Link TL-WN725N (not

supplied).

USB WiFi Adapter

SPECIFICATIONS

Model T3DSO1102, T3DSO1104, T3DSO1204 T3DSO1202A, T3DSO1302A

Acquire System

Sampling Rate 1 GSa/s (single channel/pair),

500 MSa/s (two channels/pair)

2 GSa/s (single channel),

1 GSa/s (two channels)

Memory Depth Max 14 Mpts/Ch (single channel/pair), 7

Mpts/Ch (two channels/pair)

Max 28 Mpts/Ch (single channel),

14 Mpts/Ch (two channels)

Peak Detect 2 nsec (Four channel series)

4 nsec (Two channel series)

1 nsec

Average Averages: 4, 16, 32, 64, 128, 256, 512, 1024

Eres Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable

Waveform interpolation Sin(x)/x, Linear

Input

Channels 4, no EXT (four channel series)

2+EXT (two channel series)

2+EXT

Coupling DC, AC, GND

Impedance DC: (1 MΩ ± 2 %) || (15 pF ± 2 pF)

(Four channel series)

DC: (1 MΩ ± 2 %) || (18 pF ± 2 pF)

(Two channel series)

DC: (1 MΩ ± 2 %) || (18 pF ± 2 pF)

DC: (50 Ω ± 2 %)

Max.Input voltage 1 MΩ ≤ 400 Vpk (DC + Peak AC <= 10 kHz) 1 MΩ ≤ 400 Vpk (DC + Peak AC <= 10 kHz)

DC: 50 Ω: < 5V rms

CH to CH Isolation DC-Max BW > 40 dB

Probe attenuation 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X……1000X, 2000X, 5000X, 10000X

Vertical System

Bandwidth (–3 dB ) 200 MHz (T3DSO1204) / T3DSO1202A)

350 MHz (T3DSO1302A)

100 MHz (T3DSO1102 / T3DSO1104)

Vertical Resolution 8-bit

Vertical Scale (Probe 1X) 500 μV/div – 10 V/div (1-2-5 sequence )

Offset Range (Probe 1X) 500 μV – 118 mV: ± 2 V

120 mV – 1.18 V: ± 20 V

1.2 V – 10 V: ± 200 V

500 μV – 100 mV: ± 2 V

102 mV – 1 V: ± 20 V

1.02 V – 10 V: ± 200 V

Bandwidth Limit 20 MHz ± 40 % 20 MHz ± 40 %

Bandwidth Flatness DC – 10 % (BW): ± 1 dB

10 % – 50 % (BW): ± 2 dB

50 % – 100 % (BW): + 2 dB/–3 dB

DC – 60 % (BW): ± 1 dB

60 % – 100 % (BW): + 1 dB/–3 dB

Low Frequency Response (AC –3 dB) ≤ 10 Hz (at input BNC) ≤ 2 Hz (at input BNC)

Noise ST-DEV ≤ 0.5 division (< 1 mV/div)

ST-DEV ≤ 0.2 division (< 2 mV/div)

ST-DEV ≤ 0.1 division (≥ 2 mV/div)

SFDR including harmonics ≥ 35 dB

DC Gain Accuracy ≤ ± 3.0%: 5 mV/div – 10 V/div

≤ ± 4.0%: ≤ 2 mV/div

Offset Accuracy ± (1 % * Offset + 1.5 % * 8 * div + 2 mV): ≥ 2 mV/div

± (1 % * Offset + 1.5 % * 8 * div + 500 uV): ≤ 1 mv/div

Risetime Typical 1.0 ns (T3DSO1302A)

Typical 1.8 ns (T3DSO1202A / T3DSO1204)

Typical 3.5 ns (T3DSO1102 / T3DSO1104)

Overshoot (500 ps Pulse) < 10 %

Horizontal System

Timebase Scale 1.0 ns/div – 100 s/div 500 ps/div – 100 s/div

Channel Skew < 100 ps

Waveform Capture Rate Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)

Intensity grading 256 Levels

Display Format Y-T, X-Y, Roll

Timebase Accuracy ± 25 ppm

Roll Mode 50 ms/div – 100 s/div (1-2-5 step)

Model T3DSO1102, T3DSO1104, T3DSO1204 T3DSO1202A, T3DSO1302A

Trigger System

Trigger Mode Auto, Normal, Single

Trigger Level Internal: ± 4.5 div from the center of the screen

EXT: ± 0.6 V (Two channel series)

EXT/5: ± 3 V (Two channel series)

Holdoff Range 80 ns – 1.5 s

Trigger Coupling AC

LFRJ

HFRJ

Noise RJ

Coupling Frequency Response DC: Passes all components of the signal

AC: Blocks DC components and attenuates signals below 8 Hz

LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz

HFRJ: Attenuates the high-frequency components above 1.2 MHz

Coupling Frequency Response

(EXT)

DC: Passes all components of the signal

AC: Blocks DC components and attenuates

signals below 20 Hz

LFRJ: Blocks the DC component and

attenuates the low-frequency components

below 7 KHz

HFRJ: Attenuates the high-frequency

components above 160 KHz

DC: Passes all components of the signal

AC: Blocks DC components and attenuates

signals below 10 Hz

LFRJ: Blocks the DCcomponent and

attenuates the low-frequency components

below 6 KHz

HFRJ: Attenuates the high-frequency

components above 200 KHz

Trigger Accuracy (Typical) Internal: ± 0.2 div

EXT (Two channel series): ± 0.4 div

Trigger Sensitivity DC – Max BW 0.6 div

EXT (Two channel series): 200 mVpp DC – 10 MHz

300 mVpp 10 MHz – BW frequency

EXT/5 (Two channel series): 1 Vpp DC – 10 MHz

1.5 Vpp 10 MHz – BW frequency

Trigger Jitter < 100 ps

Trigger Displacement Pre-Trigger: 0 – 100 % Memory

Delay Trigger: 0 to 10,000 div

Edge Trigger

Slope Rising, Falling, Rising & Falling

Source All channels/ EXT/ (EXT/5)/ AC Line (Two channel series)

All channels/ AC Line (Four channel series)

Slope Trigger

Slope Rising, Falling

LimitRange < , > , < > , > <

Source All channels

TimeRange 2 ns – 4.2 s

Resolution 1 ns

Pulse Trigger

Polarity +wid , -wid

Limit Range < , > , < > , > <

Source All channels

Pulse Range 2 ns ~ 4.2 s

Resolution 1 ns

Video Trigger

Signal Standard NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom

Source All channels

Sync Any, Select

Trigger condition Line, Field

SPECIFICATIONS

Window Trigger

Window Type Absolute, Relative

Source All channels

Interval Trigger

Slope Rising, Falling

Limit Range < , > , < > , > <

Source All channels

Time Range 2 ns ~ 4.2 s

Resolution 1 ns

Dropout Trigger

Timeout Type Edge, State

Source All channels

Slope Rising, Falling

Time Range 2 ns ~ 4.2 s

Resolution 1 ns

Runt Trigger

Polarity +wid , -wid

Limit Range < , > , < > , > <

Source All channels

Time Range 2 ns ~ 4.2 s

Resolution 1 ns

Pattern Trigger

Pattern Setting Invalid, Low, High

Logic AND, OR, NAND, NOR

Source All channels

Limit Range < , > , < > , > <

Time Range 2 ns ~ 4.2 s

Resolution 1 ns

Serial Trigger

I2C Trigger

Condition Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data,

Data Length

Source (SDA/SCL) All channels

Data format Hex

Limit Range EEPROM: =, >, <

Data Length EEPROM: 1 byte

Addr & Data: 1 ~ 2 byte

Data Length: 1 ~ 12 byte

R/W bit Addr & Data: Read, Write, Don’t care

SPI Trigger

Condition Data

Source (CS/CL/Data) All channels

Data format Binary

Data Length 4 ~ 96 bit

Bit Value 0, 1, X

Bit Order LSB, MSB

UART / RS232 Trigger

Condition Start, Stop, Data, Parity Error

Source (RX/TX) All channels

Data format Hex

Limit Range =, >, <

Data Length 1 byte

Data Width 5 bit, 6 bit, 7 bit, 8 bit

Parity Check None, Odd, Even

Stop Bit 1 bit, 1.5 bit, 2 bit

Idle Level High, Low

Baud (Selectable) 600/1200/2400/4800/9600/19200/38400/57600/115200 bit/s

(Custom) 300 bit/s ~ 5,000,000 bit/s

CAN Trigger

Condition Start, Remote, ID, ID + Data, Error

Source All channels

ID STD (11 bit), EXT (29 bit)

Data Format Hex

Data Length 1~2 byte

Baud Rate (Selectable) 5 k/10 k/20 k/50 k/100 k/125 k/250 k/500 k/800 k/1 M bit/s

LIN Trigger

Condition Break, Frame ID, ID+Data, Error

Source All channels

ID 1 byte

Data Format Hex

Data Length 1 ~ 2 byte

Baud Rate (Selectable) 600/1200/2400/4800/9600/19200 bit/s

Baud Rate (Custom) 300 bit/s ~ 20 kbit/s

Serial Decoder

I2C Decoder

Signal SCL, SDA

Address 7 bits, 10 bits

Threshold -4.5 ~ 4.5 div

List 1 ~ 7 lines

SPI Decoder

Signal SCL,MISO, MOSI, CS * NOTE 2 channel scopes can only use 2 signal identiers

Edge Select Rising, Falling

Idle Level Low, High

Bit Order MSB, LSB

Threshold -4.5 ~ 4.5 div

List 1 ~ 7 lines

UART / RS232 Decoder

Signal RX, TX

Data Width 5 bit, 6 bit, 7 bit, 8 bit

Parity Check None, Odd, Even

Stop Bit 1 bit, 1.5 bit, 2 bit

Idle Level Low, High

Threshold -4.5 ~ 4.5 div

List 1 ~ 7 lines

CAN Decoder

Signal CAN_H, CAN_L

Source CAN_H, CAN_L, CAN_H-CAN_L

Threshold -4.5 ~ 4.5 div

List 1 ~ 7 lines

LIN Decoder

LIN Specication Package Revision Ver1.3, Ver2.0

Threshold -4.5 ~ 4.5 div

List 1 ~ 7 lines

Measurement

Source All channels, All channels in Zoom, Math, All References, History

Number of Measurements Display 5 measurements at the same time

Measurement Range Screen region, Gate region

Measurement Parameters (38 Types)

Vertical (Voltage) Max Highest value in input waveform

Min Lowest value in input waveform

Pk-Pk Difference between maximum and minimum data values

Ampl Difference between top and base in a bimodal signal, or between max and

min in an unimodal signal

Top Value of most probable higher state in a bimodal waveform

Base Value of most probable lower state in a bimodal waveform

Mean Average of all data values

Cmean Average of data values in the rst cycle

Stdev Standard deviation of all data values

Cstd Standard deviation of all data values in the rst cycle

VRMS Root mean square of all data values

Crms Root mean square of all data values in the rst cycle

FOV Overshoot after a falling edge; (base-min)/Amplitude

FPRE Overshoot before a falling edge; (max-top)/Amplitude

ROV Overshoot after a rising edge; (max-top)/Amplitude

RPRE Overshoot before a rising edge; (base-min)/Amplitude

Level@X the voltage value of the trigger point

Horizontal( Time) Period Period for every cycle in waveform at the 50 % level, and positive slope

Freq Frequency for every cycle in waveform at the 50 % level, and positive slope

+Wid Width measured at 50 % level and positive slope

-Wid Width measured at 50 % level and negative slope

Rise Time Duration of rising edge from 10 – 90 %

Fall Time Duration of falling edge from 90 – 10 %

Bwid Time from the rst rising edge to the last falling edge, or the rst falling edge

to the last rising edge at the 50 % crossing

+Dut Ratio of positive width to period

-Dut Ratio of negative width to period

Delay Time from the trigger to the rst transition at the 50 % crossing

Time@Level Time from the trigger to each rising edge at the 50 % crossing.

When Statistics is Off, it shows the time from the trigger to the last rising

edge at the 50 % crossing.

When Statistics is On, it shows the Current, Mean, Min, Max, Standard

Deviation of time from the trigger to each rising edge at the 50 % crossing

in multiple frames (number = Count).

Delay Phase Calculate the phase difference between two edges

FRR Time between the rst rising edges of the two channels

FRF Time from the rst rising edge of channel A to the rst falling edge of channel B

FFR Time from the rst falling edge of channel A to the rst rising edge of channel B

FFF Time from the rst falling edge of channel A to the rst falling edge of channel B

LRR Time from the rst rising edge of channel A to the last rising edge of channel B

LRF Time from the rst rising edge of channel A to the last falling edge of channel B

LFR Time from the rst falling edge of channel A to the last rising edge of channel B

LFF Time from the rst falling edge of channel A to the last falling edge of channel B

Skew Time of source A edge minus time of nearest source B edge

Cursors Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2)

Track: Time X1, X2, (X1-X2)

Statistics Current, Mean, Min, Max, Stdev, Count

Counter Hardware 6 bit counter( channels are selectable)

SPECIFICATIONS

Math Function

Operation + , - , * , / , FFT , d/dt , ∫dt , √

FFT window Rectangular, Blackman, Hanning, Hamming, Flattop

FFT display Full Screen, Split, Exclusive

Number of Decoders 2

USB AWG Module (Not available on the T3DSO1102)

Channel 1

Max. Output Frequency 25 MHz

Sampling Rate 125 MSa/s

Frequency Resolution 1 μHz

Frequency Accuracy ± 50 ppm

Vertical Resolution 14-bits

AmplitudeRange -1.5 ~ +1.5 V (50 Ω)

-3 ~ +3 V (High-Z)

Waveform Type Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms

Output impedance 50 Ω ± 2 %

Protection Over-Voltage Protection, Current-Limiting Protection

Sine

Frequency 1 μHz ~ 25 MHz

Offset Accuracy (10 kHz) ± (1 % * Offset Setting Value + 1 mVpp)

Amplitude flatness (10 kHz, 5 Vpp) ± 0.3 dB

SFDR DC ~ 1 MHz -60 dBc

1 MHz ~ 5 MHz -55 dBc

5 MHz ~ 25 MHz -50 dBc

HD DC ~ 5 MHz -50 dBc

5 MHz ~ 25 MHz -45 dBc

Square/Pulse

Frequency 1 μHz ~ 10 MHz

Duty Cycle 1 % ~ 99 %

Rise/Fall time < 24 ns (10 % ~ 90 %)

Overshoot (1 kHz,1 Vpp, Typical) < 3 % (typical 1 kHz, 1 Vpp)

Pulse Width > 50 ns

Jitter < 500 ps + 10 ppm

Ramp

Frequency 1 μHz ~ 300 kHz

Linearity (Typical) < 0.1 % of Pk-Pk (Typical, 1 kHz, 1 Vpp, 100 % Symmetry)

Symmetry 0 % ~ 100 % (Adjustable)

Offset range ± 1.5 V (50 Ω)

± 3 V (High-Z)

Accuracy ± (|offset| * 1 % + 3 mV)

Noise

Bandwidth > 25 MHz (-3 dB)

Arbitrary Wave

Frequency 1 μHz ~ 5 MHz

Wave Length 16 kpts

Sampling Rate 125 MSa/s

Waveform Entry EasyScope and USB-Stick

Digital Channels (Not available on the T3DSO1102)

No. of Channels 16

Max. Sampling Rate 1 GSa/s

Memory Depth 14 Mpts/CH

Min. Detectable Pulse Width 4 ns

Level Group D0~D7, D8~D15

Level Range -8 V ~ 8 V

Logic Type TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom

Skew[2] D0~D15: ±1 sampling interval

Analog To Digital: ± (1 sampling interval +1 ns)

I/O

Standard USB Host, USB Device, LAN, Pass/Fail, Trigger Out

Pass/Fail 3.3 V TTL Output

Display (Screen)

Display Type 7-inch TFT LCD

Display Resolution 800 × 480

Display Color 24 bit

Contrast (Typical) 500:1

Backlight 300 nit

Range 8 x 14 divisions

Display (Waveform)

Display Mode Dot, Vector

Persist Time Off, 1 Sec, 5 Sec, 10 Sec, 30 Sec, Innite

Color Display Normal, Color

Screen Saver 1 min, 5 min, 10 min, 30 min, 1 hour, Off

Language Simplied Chinese, Traditional Chinese, English, French, Japanese, Korean, German,

Russian, Italian, Portuguese

Environments

Temperature Operating: 10 ~ +40

Non-operating: -20 ~ +60

Humidity Operating: 85 % RH, 40 Deg C, 24 hours

Non-operating: 85 % RH, 65 Deg C, 24 hours

Height Operating: ≤ 3000 m

Non-operating: ≤ 15,266 m

Electromagnetic Compatibility 2004/108/EC)

Execution Standard EN 61326-1:2006

EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008

Safety 2006/95/EC

Execution Standard EN 61010-1:2010 / EN 61010-2-030:2010

Power Supply

Input Voltage 100 ~ 240 VAC, CAT II, Auto selection

Frequency 50/60/400 Hz

Power 50 W Max

Mechanical (T3DSO1104, T3DSO1204, T3DSO1202A, T3DSO1302A)

Dimensions Length: 312 mm / Width: 132.6 mm / Height: 151 mm

Weight N.W: 2.6 kg; G.W: 3.8 kg

Mechanical (T3DSO1102)

Dimensions Length: 312 mm / Width: 134 mm / Height: 150 mm

Weight N.W: 2.5 Kg; G.W: 3.5 Kg

All T3DSO1000 Series Oscilloscopes come with a 3 year return to Teledyne LeCroy warranty.

SPECIFICATIONS

Probes and Accessories

Probe Model Picture Description

Passive Probes

(T3DSO1102,

T3DSO1104,

T3DSO1202A,

T3DSO1204)

T3PP300 Passive Probe, Bandwidth: 300 MHz

Passive Probes

(T3DSO1302A)

T3PP350 Passive Probe, Bandwidth: 350 MHz

USB AWG Module T3DSO1000-

FGMOD

Output Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms.

The arbitrary waveforms can be accessed and edited by the EasyScope

PC software

Ordering information

Product Name T3DSO1102 100 MHz Two Channels

T3DSO1104 100 MHz Four Channels

T3DSO1202A 200 MHz Two Channels

T3DSO1204 200 MHz Four Channels

T3DSO1302A 350 MHz Two Channels

Standard Accessories USB Cable -1

Quick Start -1

Passive Probe -4 / 2

Certication -1

Power Cord -1

Optional Accessories 16 Channel MSO Software T3DSO1000-MSO or T3DSO1000A-MSO

(Not available for T3DSO1102)

16 Channel Logic Analyzer Lead T3DSO1000-LS

(Not available for T3DSO1102) (Requires T3DSO1000-MSO or

T3DSO1000A-MSO Software)

AWG Software (Not available for T3DSO1102) T3DSO1000-FG or T3DSO1000A-FG

USB AWG Module Hardware T3DSO1000-FGMOD

(Not available for T3DSO1102) (Requires T3DSO1000-FG or

T3DSO1000A-FG)

WIFI Software (Not available for T3DSO1102) T3DSO1000-WIFI or T3DSO1000A-WIFI

Does not include the TP-Link TL-WN725N, see below

For Wi-Fi support the T3DSO1000-WIFI/T3DSO1000A-WIFI option is required and the TP-Link TL-WN725N. The TP-Link

TL-WN725N is NOT supplied as part of the T3DSO1000-WIFI/T3DSO1000A-WIFI option. The TP-Link TL-WN725N is not

available through Teledyne Test Tools and should be purchased separately.

Product brand or brand names are trademarks or requested trademarks of their respective holders.

T3 stands for Teledyne Test Tools.

teledynelecroy.com

Company Prole

Teledyne LeCroy is aleading provider of oscilloscopes, protocol

analyzers and related test and measurement solutions that

enable companies across awide range of industries to design

and test electronic devices of all types. Since our founding

in 1964, we have focused on creating products that improve

productivity by helping engineers resolve design issues

faster and more effectively. Oscilloscopes are tools used by

designers and engineers to measure and analyze complex

electronic signals in order to develop high-performance

systems and to validate electronic designs in order to improve

time to market.

The Teledyne Test Tools brand extends the Teledyne LeCroy

product portfolio with a comprehensive range of test

equipment solutions. This new range of products delivers

a broad range of quality test solutions that enable engineers

to rapidly validate product and design and reduce time-to-

market. Designers, engineers and educators rely on Teledyne

Test Tools solutions to meet their most challenging needs for

testing, education and electronics validation.

Location and Facilities

Headquartered in Chestnut Ridge, New York, Teledyne

Test Tools and Teledyne LeCroy has sales, service and

development subsidiaries in the US and throughout

Europe and Asia. Teledyne Test Tools and Teledyne LeCroy

products are employed across awide variety of industries,

including semiconductor, computer, consumer electronics,

education, military/aerospace, automotive/industrial, and

telecommunications.

Teledyne LeCroy

(US Headquarters)

700 Chestnut Ridge Road

Chestnut Ridge, NY. USA 10977-6499

Phone: 800-553-2769 or 845-425-2000

Fax Sales: 845-578-5985

Phone Support: 1-800-553-2769

Email Sales: contact.corp@teledynelecroy.com

Email Support: support@teledynelecroy.com

Web Site: http://teledynelecroy.com/

World wide support contacts can be found at:

https://teledynelecroy.com/support/contact

World wide instrument service can be found at:

https://teledynelecroy.com/support/service.aspx

RoHS and WEEE information can be found at:

https://teledynelecroy.com/support/rohs.aspx

Teledyne LeCroy

(European Headquarters)

Teledyne LeCroy GmbH

Im Breitspiel 11c

D-69126 Heidelberg, Germany

Phone: +49 6221 82700

Fax: +49 6221 834655

Phone Service: +49 6221 8270 85

Phone Support: +49 6221 8270 28

Email Sales: contact.gmbh@teledynelecroy.com

Email Service: service.gmbh@teledynelecroy.com

Email Support: tlc.t3.appsupport.eu@teledyne.com

Web Site: http://teledynelecroy.com/

ABOUT TELEDYNE TEST TOOLS

Distributed by:

23sept19