S-75V00ANC MINI LOGIC SERIES 2 INPUT NAND GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V00ANC is a single 2-Input NAND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 3.7 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 IN A 2 GND 3 5 4 VCC Product code 5V1 4 OUT Y 1 2 3 (Top view) (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y H H H L 1 MINI LOGIC SERIES 2 INPUT NAND GATE S-75V00ANC Rev.3.0_00 Product Name Structure S-75V00A NC - 5V1 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 2 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT NAND GATE S-75V00ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC = 3.30.3 V) 0 to 20 (VCC = 50.5 V) Unit V V V ns ns DC Electrical Characteristics Item Input voltage Conditions Symbol VCC "H" level VIH "L" level VIL "H" level VOH VIN = VIL or VIH Output voltage IOH = -50 A IOH = -4 mA IOH = -8 mA IOL = 50 A "L" level VOL Input current IIN Current consumption ICC VIN = VIH IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Min. 2.0 1.5 3 to 5.5 VCCx0.7 2.0 3 to 5.5 2.0 1.9 3.0 2.9 4.5 4.4 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.5 V VCCx0.7 V 0.5 0.5 V VCCx0.3 VCCx0.3 V 2.0 1.9 V 3.0 2.9 V 4.5 4.4 V 2.48 V 3.80 V 0 0.1 0.1 V 0 0.1 0.1 V 0 0.1 0.1 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 3 MINI LOGIC SERIES 2 INPUT NAND GATE S-75V00ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 5.5 7.9 1.0 9.5 ns 3.30.3 tPLH, 50 10.0 14.0 1.0 15.0 ns Propagation delay time tPHL 15 3.7 5.5 1.0 6.5 ns 5.00.5 50 6.1 8.5 1.0 9.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 14 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC 90% VIN PG VIN VOUT 50% 10% GND tPHL tPLH CL 50 VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 4 Seiko Instruments Inc. S-75V02ANC MINI LOGIC SERIES 2 INPUT NOR GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V02ANC is a single 2-input NOR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 3.6 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration IN B Marking Specification 5 1 5 4 VCC Product code IN A 2 GND 3 5V3 4 OUT Y 1 2 3 (Top view) (Top view) Logic Diagram IN B OUT Y IN A True values A L L H H Seiko Instruments Inc. B L H L H Y H L L L 5 MINI LOGIC SERIES 2 INPUT NOR GATE S-75V02ANC Rev.3.0_00 Product Name Structure S-75V02A NC - 5V3 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Storage temperature Lead temperature (10 s) Topr Tstg TL *1. Symbol (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 6 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT NOR GATE S-75V02ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC = 3.30.3 V) 0 to 20 (VCC = 50.5 V) Unit V V V ns ns DC Electrical Characteristics Item Input voltage Conditions Symbol "H" level VIH "L" level VIL IOH = -50 A "H" level VOH VIN = VIL IOH = -4 mA IOH = -8 mA Output voltage "L" level VOL Input current IIN Current consumption ICC VIN = VIH or VIL IOL = 50 A IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Min. VCC 2.0 1.5 3 to 5.5 VCCx0.7 2.0 3 to 5.5 2.0 1.9 3.0 2.9 4.5 4.4 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.5 V VCCx0.7 V 0.5 0.5 V VCCx0.3 VCCx0.3 V 2.0 1.9 V 3.0 2.9 V 4.5 4.4 V 2.48 V 3.80 V 0 0.1 0.1 V 0 0.1 0.1 V 0 0.1 0.1 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 7 MINI LOGIC SERIES 2 INPUT NOR GATE S-75V02ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 5.6 7.9 1.0 9.5 ns 3.30.3 tPLH, 50 10.0 14.0 1.0 15.0 ns Propagation delay time tPHL 15 3.6 5.5 1.0 6.5 ns 5.00.5 50 5.7 8.0 1.0 9.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 15 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC VIN VOUT 90% VIN PG 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 8 Seiko Instruments Inc. S-75V04ANC MINI LOGIC SERIES INVERTER www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V04ANC is a INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. The special purpose unbuffered circuit design is suitable for a wide variety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 3.8 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 NC 1 IN A 2 GND 3 5 4 VCC Product code 5V5 4 OUT Y 1 (Top view) 2 3 (Top view) Logic Diagram IN A OUT Y True values A L H Seiko Instruments Inc. Y H L 9 MINI LOGIC SERIES INVERTER S-75V04ANC Rev.3.0_00 Product Name Structure S-75V04A NC - 5V5 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 10 Seiko Instruments Inc. MINI LOGIC SERIES INVERTER S-75V04ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC = 3.30.3 V) 0 to 20 (VCC = 50.5 V) Unit V V V ns ns DC Electrical Characteristics Item Input voltage Conditions Symbol "H" level VIH "L" level VIL IOH = -50 A "H" level VOH VIN = VIL IOH = -4 mA IOH = -8 mA Output voltage IOL = 50 A "L" level VOL Input current IIN Current consumption ICC VIN = VIH IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Min. VCC 2.0 1.5 3 to 5.5 VCCx0.7 2.0 3 to 5.5 2.0 1.9 3.0 2.9 4.5 4.4 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.5 V VCCx0.7 V 0.5 0.5 V VCCx0.3 VCCx0.3 V 2.0 1.9 V 3.0 2.9 V 4.5 4.4 V 2.48 V 3.80 V 0 0.1 0.1 V 0 0.1 0.1 V 0 0.1 0.1 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 11 MINI LOGIC SERIES INVERTER S-75V04ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 5.0 7.1 1.0 8.5 ns 3.30.3 tPLH, 50 9.6 13.5 1.0 14.5 ns Propagation delay time tPHL 15 3.8 5.5 1.0 6.5 ns 5.00.5 50 5.7 8.0 1.0 9.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 13 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC VIN PG 90% VIN VOUT 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 12 Seiko Instruments Inc. S-75VU04ANC MINI LOGIC SERIES INVERTER (unbuffer) www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75VU04ANC is a inverter fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. The special purpose unbuffered circuit design is suitable for a wide variety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 3.5 ns (at 5 V) VNIH = VNIL = 10% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 NC 1 5 4 VCC Product code IN A 2 GND 3 5V6 4 OUT Y 1 2 3 (Top view) (Top view) Logic Diagram IN A OUT Y True values A L H Seiko Instruments Inc. Y H L 13 MINI LOGIC SERIES INVERTER (unbuffer) S-75VU04ANC Rev.3.0_00 Product Name Structure S-75VU04A NC - 5V6 TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 14 Seiko Instruments Inc. MINI LOGIC SERIES INVERTER (unbuffer) S-75VU04ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Standard 2 to 5.5 0 to 5.5 0 to VCC Unit V V V DC Electrical Characteristics Item Input voltage Conditions Symbol "H" level VIH VOUT = VOL "L" level VIL VOUT = VOH VIN = VIL IOH = -50 A VIN = GND IOH = -4 mA IOH = -8 mA VIN = VIH IOL = 50 A "H" level VOH Output voltage "L" level VOL IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND VIN = VCC Input current IIN Current consumption ICC VCC Min. 2.0 1.7 3 to 5.5 VCCx0.8 2.0 3 to 5.5 2.0 1.8 3.0 2.7 4.5 4.0 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.7 V VCCx0.8 V 0.3 0.3 V VCCx0.2 VCCx0.2 V 2.0 1.8 V 3.0 2.7 V 4.5 4.0 V 2.48 V 3.80 V 0 0.2 0.2 V 0 0.3 0.3 V 0 0.5 0.5 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 15 MINI LOGIC SERIES INVERTER (unbuffer) S-75VU04ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 5.0 8.9 1.0 10.5 ns 3.30.3 tPLH, 50 8.9 12.5 1.0 13.5 ns Propagation delay time tPHL 15 3.5 5.5 1.0 6.5 ns 5.00.5 50 5.4 7.5 1.0 8.0 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 6 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns 90% VIN PG VIN VOUT VCC 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 16 Seiko Instruments Inc. S-75V08ANC MINI LOGIC SERIES 2 INPUT AND GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V08ANC is a Single 2-Input AND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 4.3 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5V2 4 OUT Y 1 2 3 (Top view) (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y L L L H 17 MINI LOGIC SERIES 2 INPUT AND GATE S-75V08ANC Rev.3.0_00 Product Name Structure S-75V08A NC - 5V2 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 18 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT AND GATE S-75V08ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC = 3.30.3 V) 0 to 20 (VCC = 50.5 V) Unit V V V ns ns DC Electrical Characteristics Item Input voltage Conditions Symbol "H" level VIH "L" level VIL IOH = -50 A "H" level VOH VIN = VIH IOH = -4 mA IOH = -8 mA Output voltage "L" level VOL Input current IIN Current consumption ICC VIN = VIH or VIL IOL = 50 A IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Min. VCC 2.0 1.5 3 to 5.5 VCCx0.7 2.0 3 to 5.5 2.0 1.9 3.0 2.9 4.5 4.4 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.5 V VCCx0.7 V 0.5 0.5 V VCCx0.3 VCCx0.3 V 2.0 1.9 V 3.0 2.9 V 4.5 4.4 V 2.48 V 3.80 V 0 0.1 0.1 V 0 0.1 0.1 V 0 0.1 0.1 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 19 MINI LOGIC SERIES 2 INPUT AND GATE S-75V08ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 6.2 8.8 1.0 10.5 ns 3.30.3 tPLH, 50 9.6 13.5 1.0 14.5 ns Propagation delay time tPHL 15 4.3 5.9 1.0 7.0 ns 5.00.5 50 5.7 7.9 1.0 9.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 14 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC 90% VIN VIN PG VOUT 50% 10% tPLH GND tPHL VOH CL 50 VOUT 50% 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 20 Seiko Instruments Inc. S-75V14ANC MINI LOGIC SERIES SCHMITT INVERTER www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V14ANC is a SCHMITT INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 5.5 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 NC 1 5 4 VCC Product code IN A 2 GND 3 5VA 4 OUT Y 1 (Top view) 2 3 (Top view) Logic Diagram IN A OUT Y True values A L H Seiko Instruments Inc. Y H L 21 MINI LOGIC SERIES SCHMITT INVERTER S-75V14ANC Rev.3.0_00 Product Name Structure S-75V14A NC - 5VA - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 22 Seiko Instruments Inc. MINI LOGIC SERIES SCHMITT INVERTER S-75V14ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Standard 2 to 5.5 0 to 5.5 0 to VCC Unit V V V DC Electrical Characteristics Item Conditions Symbol "H" level VP "L" level VN Threshold voltage Hysteresis voltage VH IOH = -50 A "H" level VOH VIN = VIL IOH = -4 mA IOH = -8 mA Output voltage IOL = 50 A "L" level VOL Input current IIN Current consumption ICC VIN = VIH IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND VCC 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Min. 0.90 1.35 1.65 0.30 0.40 0.5 1.9 2.9 4.4 2.58 3.94 Seiko Instruments Inc. Ta = 25C Typ. 2.0 3.0 4.5 0 0 0 Max. 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.36 0.36 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 2.20 V 3.15 V 3.85 V 0.90 V 1.35 V 1.65 V 0.30 1.20 V 0.40 1.40 V 0.5 1.60 V 1.9 V 2.9 V 4.4 V 2.48 V 3.80 V 0.1 V 0.1 V 0.1 V 0.44 V 0.44 V 1.0 A 10.0 A 23 MINI LOGIC SERIES SCHMITT INVERTER S-75V14ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 8.3 12.8 1.0 15.0 ns 3.30.3 tPLH, 50 10.8 16.3 1.0 18.5 ns Propagation delay time tPHL 15 5.5 8.6 1.0 10.0 ns 5.00.5 50 7.0 10.6 1.0 12.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 14 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC 90% VIN VIN PG VOUT 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 24 Seiko Instruments Inc. S-75V32ANC MINI LOGIC SERIES 2 INPUT OR GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V32ANC is a single 2-input OR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 3.8 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5V4 4 OUT Y 2 1 3 (Top view) (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y L H H H 25 MINI LOGIC SERIES 2 INPUT OR GATE S-75V32ANC Rev.3.0_00 Product Name Structure S-75V32A NC - 5V4 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 26 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT OR GATE S-75V32ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC = 3.30.3 V) 0 to 20 (VCC = 50.5 V) Unit V V V ns ns DC Electrical Characteristics Item Input voltage Conditions Symbol "H" level VIH "L" level VIL "H" level VOH VIN = VIL or VIH Output voltage IOH = -50 A IOH = -4 mA IOH = -8 mA IOL = 50 A "L" level VOL Input current IIN Current consumption ICC VIN = VIL IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Min. VCC 2.0 1.5 3 to 5.5 VCCx0.7 2.0 3 to 5.5 2.0 1.9 3.0 2.9 4.5 4.4 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.5 V VCCx0.7 V 0.5 0.5 V VCCx0.3 VCCx0.3 V 2.0 1.9 V 3.0 2.9 V 4.5 4.4 V 2.48 V 3.80 V 0 0.1 0.1 V 0 0.1 0.1 V 0 0.1 0.1 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 27 MINI LOGIC SERIES 2 INPUT OR GATE S-75V32ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 5.5 7.9 1.0 9.5 ns 3.30.3 tPLH, 50 10.0 14.0 1.0 15.0 ns Propagation delay time tPHL 15 3.8 5.5 1.0 6.5 ns 5.00.5 50 6.1 8.5 1.0 9.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 15 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC 90% VIN VIN PG 50% 10% VOUT GND tPLH tPHL 50 CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 28 Seiko Instruments Inc. S-75V86ANC MINI LOGIC SERIES EXCLUSIVE OR GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75V86ANC is a EXCLUSIVE OR GATE fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 2 V to 5.5 V 1.0 A max. (at 5.5 V, 25C) tPD = 4.8 ns (at 5 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5V8 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y L H H L 29 MINI LOGIC SERIES EXCLUSIVE OR GATE S-75V86ANC Rev.3.0_00 Product Name Structure S-75V86A NC - 5V8 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +7.0 V -0.5 to +7.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 25 mA 50 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 30 Seiko Instruments Inc. MINI LOGIC SERIES EXCLUSIVE OR GATE S-75V86ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC = 3.30.3 V) 0 to 20 (VCC = 50.5 V) Unit V V V ns ns DC Electrical Characteristics Item Input voltage Conditions Symbol "H" level VIH "L" level VIL "H" level VOH VIN = VIL or VIH Output voltage "L" level VOL Input current IIN Current consumption ICC VIN = VIL or VIH IOH = -50 A IOH = -4 mA IOH = -8 mA IOL = 50 A IOL = 4 mA IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Min. VCC 2.0 1.5 3 to 5.5 VCCx0.7 2.0 3 to 5.5 2.0 1.9 3.0 2.9 4.5 4.4 3.0 2.58 4.5 3.94 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 Seiko Instruments Inc. Ta = 25C Ta = -40 to 85C Unit Typ. Max. Min. Max. 1.5 V VCCx0.7 V 0.5 0.5 V VCCx0.3 VCCx0.3 V 2.0 1.9 V 3.0 2.9 V 4.5 4.4 V 2.48 V 3.80 V 0 0.1 0.1 V 0 0.1 0.1 V 0 0.1 0.1 V 0.36 0.44 V 0.36 0.44 V 0.1 1.0 A 1.0 10.0 A 31 MINI LOGIC SERIES EXCLUSIVE OR GATE S-75V86ANC Rev.3.0_00 AC Electrical Characteristics (Input tR = tF = 3 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) CL (pF) Min. Typ. Max. Min. Max. 15 7.0 11.0 1.0 13.0 ns 3.30.3 tPLH, 50 10.4 14.5 1.0 16.5 ns Propagation delay time tPHL 15 4.8 6.8 1.0 8.0 ns 5.00.5 50 6.5 9.0 1.0 10.0 ns Input capacitance CIN 4 10 10 pF *1 Equivalent internal capacitance CPD 18 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 3 ns 3 ns VCC 90% VIN VIN PG 50% 10% VOUT GND tPLH tPHL 50 VOH CL VOUT 50% 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 32 Seiko Instruments Inc. S-75L00ANC MINI LOGIC SERIES 2 INPUT NAND GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L00ANC is a single 2-input NAND gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 7 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5L1 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y H H H L 33 MINI LOGIC SERIES 2 INPUT NAND GATE S-75L00ANC Rev.3.0_00 Product Name Structure S-75L00A NC - 5L1 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 34 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT NAND GATE S-75L00ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage "H" level VOH VIN = VIH or VIL Output voltage IOH = -20 A IOH = -1 mA IOH = -2.6 mA IOL = 20 A "L" level VOL Input current IIN Current consumption ICC VIN = VIH IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 35 MINI LOGIC SERIES 2 INPUT NAND GATE S-75L00ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.5 ns tTHL tPLH, 6.0 9.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Unit Item Symbol Min. Typ. Max. Min. Max. VCC (V) 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 30 60 75 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 7 10 14 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC 90% VIN PG VIN VOUT 50% 10% GND tPHL tPLH CL 50 VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 36 Seiko Instruments Inc. S-75L02ANC MINI LOGIC SERIES 2 INPUT NOR GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L02ANC is a single 2-input NOR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 7 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5L3 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN B OUT Y IN A True values A L L H H Seiko Instruments Inc. B L H L H Y H L L L 37 MINI LOGIC SERIES 2 INPUT NOR GATE S-75L02ANC Rev.3.0_00 Product Name Structure S-75L02A NC - 5L3 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 38 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT NOR GATE S-75L02ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage IOH = -20 A "H" level VOH VIN = VIL IOH = -1 mA IOH = -2.6 mA Output voltage "L" level VOL Input current IIN Current consumption ICC VIN = VIL or VIH IOL = 20 A IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 39 MINI LOGIC SERIES 2 INPUT NOR GATE S-75L02ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.0 ns tTHL tPLH, 6.0 9.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Unit Item Symbol Min. Typ. Max. Min. Max. VCC (V) 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 30 60 75 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 7 10 14 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC VIN VOUT 90% VIN PG 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 40 Seiko Instruments Inc. S-75L04ANC MINI LOGIC SERIES INVERTER www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L04ANC is an inverter fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 7 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 NC 1 5 4 VCC Product code IN A GND 5L5 2 3 4 OUT Y 2 1 3 (Top view) (Top view) Logic Diagram IN A OUT Y True values A L H Seiko Instruments Inc. Y H L 41 MINI LOGIC SERIES INVERTER S-75L04ANC Rev.3.0_00 Product Name Structure S-75L04A NC - 5L5 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 42 Seiko Instruments Inc. MINI LOGIC SERIES INVERTER S-75L04ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage IOH = -20 A "H" level VOH VIN = VIL IOH = -1 mA IOH = -2.6 mA Output voltage IOL = 20 A "L" level VOL Input current IIN Current consumption ICC VIN = VIH IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 43 MINI LOGIC SERIES INVERTER S-75L04ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.0 ns tTHL tPLH, 6.0 9.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Unit Item Symbol Min. Typ. Max. Min. Max. VCC (V) 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 30 60 75 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 7 10 14 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC VIN PG 90% VIN VOUT 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 44 Seiko Instruments Inc. S-75LU04ANC MINI LOGIC SERIES INVERTER (unbuffer) www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75LU04ANC is a single packaged inverter without buffer fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The S-75LU04ANC is suitable for a wide variety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 6 ns (at 3 V) VNIH = VNIL = 10% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 NC 1 5 4 VCC Product code IN A 2 GND 3 5L6 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN A OUT Y True values A L H Seiko Instruments Inc. Y H L 45 MINI LOGIC SERIES INVERTER (unbuffer) S-75LU04ANC Rev.3.0_00 Product Name Structure S-75LU04A NC - 5L6 TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 46 Seiko Instruments Inc. MINI LOGIC SERIES INVERTER (unbuffer) S-75LU04ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage IOH = -20 A "H" level VOH VIN = VIL IOH = -1 mA IOH = -2.6 mA Output voltage IOL = 20 A "L" level VOL Input current IIN Current consumption ICC VIN = VIH IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 47 MINI LOGIC SERIES INVERTER (unbuffer) S-75LU04ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 6.0 9.0 ns tTHL tPLH, 4.0 10.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Unit Item Symbol Min. Typ. Max. Min. Max. VCC (V) 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 20 40 50 ns tPLH, Propagation delay time 1.5 10 15 20 ns tPHL 3.0 6 9 12 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns 90% VIN PG VIN VOUT VCC 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 48 Seiko Instruments Inc. S-75L08ANC MINI LOGIC SERIES 2 INPUT AND GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L08ANC is a single 2-Input AND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 7 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5L2 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y L L L H 49 MINI LOGIC SERIES 2 INPUT AND GATE S-75L08ANC Rev.3.0_00 Product Name Structure S-75L08A NC - 5L2 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 50 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT AND GATE S-75L08ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage IOH = -20 A "H" level VOH VIN = VIH IOH = -1 mA IOH = -2.6 mA Output voltage "L" level VOL Input current IIN Current consumption ICC VIN = VIL or VIH IOL = 20 A IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 51 MINI LOGIC SERIES 2 INPUT AND GATE S-75L08ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.0 ns tTHL tPLH, 6.0 9.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Unit Item Symbol Min. Typ. Max. Min. Max. VCC (V) 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 30 60 75 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 7 10 14 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC 90% VIN VIN PG VOUT 50% 10% tPLH GND tPHL VOH CL 50 VOUT 50% 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 52 Seiko Instruments Inc. S-75L14ANC MINI LOGIC SERIES SCHMITT INVERTER www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L14ANC is a SCHMITT INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 8 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 NC 1 5 4 VCC Product code IN A 2 GND 3 5LA 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN A OUT Y True values A L H Seiko Instruments Inc. Y H L 53 MINI LOGIC SERIES SCHMITT INVERTER S-75L14ANC Rev.3.0_00 Product Name Structure S-75L14A NC - 5LA - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 54 Seiko Instruments Inc. MINI LOGIC SERIES SCHMITT INVERTER S-75L14ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage IOH = -20 A "H" level VOH VIN = VIL IOH = -1 mA IOH = -2.6 mA Output voltage IOL = 20 A "L" level VOL VIN = VIH IOL = 1 mA IOL = 2.6 mA Hysteresis Voltage VH Input current IIN Current consumption ICC VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 3.6 3.6 Min. 0.80 1.20 2.10 0.9 1.4 2.9 1.07 2.61 0.20 0.25 0.45 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.20 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.50 0.50 0.65 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.80 V 1.20 V 2.10 V 0.20 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V V V V 1.0 A 10.0 A 55 MINI LOGIC SERIES SCHMITT INVERTER S-75L14ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.0 ns tTHL tPLH, 4.0 10.5 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) Min. Typ. Max. Min. Max. 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 35 70 90 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 8 12 15 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC 90% VIN VIN PG VOUT 50% 10% GND tPHL 50 tPLH CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 56 Seiko Instruments Inc. S-75L32ANC MINI LOGIC SERIES 2 INPUT OR GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L32ANC is a single 2-input OR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 7 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5L4 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y L H H H 57 MINI LOGIC SERIES 2 INPUT OR GATE S-75L32ANC Rev.3.0_00 Product Name Structure S-75L32A NC - 5L4 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 58 Seiko Instruments Inc. MINI LOGIC SERIES 2 INPUT OR GATE S-75L32ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage "H" level VOH VIN = VIH or VIL Output voltage IOH = -20 A IOH = -1 mA IOH = -2.6 mA IOL = 20 A "L" level VOL Input current IIN Current consumption ICC VIN = VIL IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 59 MINI LOGIC SERIES 2 INPUT OR GATE S-75L32ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.0 ns tTHL tPLH, 6.0 9.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) Min. Typ. Max. Min. Max. 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 30 60 75 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 7 10 14 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC 90% VIN VIN PG 50% 10% VOUT GND tPLH tPHL 50 CL VOUT 50% VOH 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 60 Seiko Instruments Inc. S-75L86ANC MINI LOGIC SERIES EXCLUSIVE OR GATE www.sii-ic.com Rev.3.0_00 (c) Seiko Instruments Inc., 1999-2010 The S-75L86ANC is an EXCLUSIVE OR GATE fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. Features * * * * * * Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Lead-free 1 V to 3.6 V 1.0 A max. (at 3.6 V, 25C) tPD = 7 ns (at 3 V) VNIH = VNIL = 28% VCC min. All pins Applications * * * * Personal computers, peripherals Cellular phones Cameras Games Package * SC-88A Pin Configuration Marking Specification 5 IN B 1 5 4 VCC Product code IN A 2 GND 3 5L8 4 OUT Y 2 1 (Top view) 3 (Top view) Logic Diagram IN B IN A OUT Y True values A L L H H Seiko Instruments Inc. B L H L H Y L H H L 61 MINI LOGIC SERIES EXCLUSIVE OR GATE S-75L86ANC Rev.3.0_00 Product Name Structure S-75L86A NC - 5L8 - TF G Environmental code G : Lead-free (for details, please contact our sales office) IC direction in tape specification Product abbreviation Package abbreviation NC : SC-88A Absolute Maximum Ratings Item Power supply voltage Input voltage Output voltage Input parasitic diode current Output parasitic diode current Output current VCC/GND current Symbol VCC VIN VOUT IIK IOK IOUT ICC Power dissipation PD Operating ambient temperature Topr Storage temperature Tstg Lead temperature (10 s) TL *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Ratings Unit -0.5 to +5.0 V -0.5 to +5.0 V -0.5 to VCC + 0.5 V -20 mA 20 mA 12.5 mA 25 mA 200 (When not mounted on board) mW *1 350 mW -40 to +85 C -65 to +150 C 260 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 400 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) 62 Seiko Instruments Inc. MINI LOGIC SERIES EXCLUSIVE OR GATE S-75L86ANC Rev.3.0_00 Recommended Operating Conditions Item Power voltage Input voltage Output voltage Symbol VCC VIN VOUT Input rise / fall time tR, tF Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC = 1.0 V) 0 to 500 (VCC = 2.0 V) 0 to 400 (VCC = 3.0 V) Unit V V V ns ns ns DC Electrical Characteristics Item Conditions Symbol "H" level VIH "L" level VIL Input voltage "H" level VOH VIN = VIH or VIL Output voltage "L" level VOL Input current IIN Current consumption ICC VIN = VIH or VIL IOH = -20 A IOH = -1 mA IOH = -2.6 mA IOL = 20 A IOL = 1 mA IOL = 2.6 mA VIN = VCC or GND VIN = VCC or GND VCC 1.0 1.5 3.0 1.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 Min. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Seiko Instruments Inc. Ta = 25C Typ. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 Max. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.1 1.0 Ta = -40 to 85C Unit Min. Max. 0.75 V 1.05 V 2.10 V 0.25 V 0.45 V 0.90 V 0.9 V 1.4 V 2.9 V 0.99 V 2.55 V 0.1 V 0.1 V 0.1 V 0.37 V 0.33 V 1.0 A 10.0 A 63 MINI LOGIC SERIES EXCLUSIVE OR GATE S-75L86ANC Rev.3.0_00 AC Electrical Characteristics Item Output rise / fall time Propagation delay time (CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.30.3 V, Ta = 25C unless otherwise specified) Symbol Measurement Conditions Min. Typ. Max. Unit tTLH, 4.0 8.0 ns tTHL tPLH, 6.0 9.0 ns tPHL (CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified) Measurement Conditions Ta = 25C Ta = -40 to 85C Item Symbol Unit VCC (V) Min. Typ. Max. Min. Max. 1.0 35 70 90 ns tTLH, Output rise / fall time 1.5 15 25 30 ns tTHL 3.0 7 10 14 ns 1.0 30 60 75 ns tPLH, Propagation delay time 1.5 15 25 30 ns tPHL 3.0 7 10 14 ns Input capacitance CIN 5 10 10 pF *1 Equivalent internal capacitance CPD 10 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr) = CPD x VCC x fin + ICC Measurement Circuit 6 ns 6 ns VCC 90% VIN VIN PG 50% 10% VOUT GND tPLH tPHL 50 VOH CL VOUT 50% 50% VOL Remark No-load output during measurement of current consumption. Input Pin Equivalent Circuit Input pin 64 Seiko Instruments Inc. 2.00.2 1.30.1 5 1 4 2 3 +0.1 0.15 -0.05 0.65 0.65 0.2 +0.1 -0.05 No. NP005-B-P-SD-1.1 TITLE SC88A-B-PKG Dimensions No. NP005-B-P-SD-1.1 SCALE UNIT mm Seiko Instruments Inc. 4.00.1 2.00.1 1.10.1 o1.550.05 0.20.05 0.3 4.00.1 o1.050.1 (2.25) 2.050.1 3 2 1 4 5 Feed direction No. NP005-B-C-SD-2.0 TITLE SC88A-B-Carrier Tape NP005-B-C-SD-2.0 No. SCALE UNIT mm Seiko Instruments Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. NP005-B-R-SD-2.1 SC88A-B-Reel TITLE No. NP005-B-R-SD-2.1 QTY. SCALE UNIT mm Seiko Instruments Inc. 3000 www.sii-ic.com * * * * * * * The information described herein is subject to change without notice. Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design. When the products described herein are regulated products subject to the Wassenaar Arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority. Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Seiko Instruments Inc. is strictly prohibited. The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc. The products described herein are not designed to be radiation-proof. Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.