00051115588822 - 3M - Product.Network

129

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Description

25Amp bi-directional Alternistor Triac is designed for AC

switching and phase control applications requiring a higher

temperature environment.

Alternistor type devices only operate in quadrants I, II, &

and are used in circuits requiring high dv/dt capability.

Features & Beneﬁts

• 150°C maximum junction

temperature

• RoHS compliant

• Glass – passivated

junctions

• Voltage capability up

to 600 V

• Surge capability up

to 300 A

Main Features

Symbol Value Unit

IT(RMS) 25 A

VDRM /VRRM 600 V

IGT 50 mA

Schematic Symbol

MT2 MT1

Agency Approval

Agency Agency File Number

®L and K Packages: E71639

Applications

Typically used in high-temperature environments where

available heat-sinking is minimal such as heating and white

goods applications.

Internally constructed isolated packages are offered for

ease of heat sinking with highest isolation voltage.

130

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed)

Symbol Test Conditions Quadrant Value Unit

IGT VD = 12V; RL = 60 Ω

I – II – III MAX. 50 mA

VGT I – II – III MAX. 1. 3 V

VGD VD = VDRM; RL = 3.3 kΩ ; TJ = 150°C I – II – III MIN. 0.2 V

IHIT = 400mA (initial) MAX. 80 mA

dv/dt VD = V DRM; Gate Open; TJ = 150°C MIN. 350 V/μs

(dv/dt)c (di/dt)c = 13.3 A/ms; TJ = 150°C MIN. 20 V/μs

tgt IG = 2 x IGT ; PW = 15µs; IT = 35.4 A TYP. 3 μs

Symbol Test Conditions Value Unit

VTM IT = 35.4A; tp = 380 μs MAX. 1. 4 V

IDRM / IRRM VDRM / VRRM

TJ = 25°C MAX. 5μA

TJ = 150°C 6000

Static Characteristics

Absolute Maximum Ratings

Symbol Parameter Test Conditions Value Unit

IT(RMS) RMS on-state current

HQ6025LH5 TC = 95°C

25 A

HQ6025RH5

HQ6025NH5

HQ6025KH5

TC = 102°C

ITSM Peak non-repetitive surge current

single half cycle; f = 50Hz;

TJ (initial) = 25°C 250

single half cycle; f = 60Hz;

TJ (initial) = 25°C 300

I2t I2t Value for fusing tp = 8.3ms 373 A2s

di/dt Critical rate-of-rise of on-state current f = 60Hz; TJ =150°C 100 A/μs

IGTM Peak gate current TJ = 150°C 2 A

PG(AV) Average gate power dissipation TJ = 150°C 0.5 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 150 °C

Thermal Resistances

Symbol Parameter Value Unit

Rθ(J-C) Junction to case (AC)

HQ6025LH5 2.0

°C/W

HQ6025RH5

HQ6025NH5 0.86

HQ6025KH5 1.35

Rθ(J-A) Junction to ambient

HQ6025LH5 50

°C/W

HQ6025RH5 45

Note: xx = voltage

131

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Figure 1: Normalized DC Gate Trigger Current

vs. Junction Temperature

Figure 2: Normalized DC Gate Trigger Voltage

vs. Junction Temperature

0.0

0.5

1.0

1.5

2.0

-40 -1510356085110 135

Junction Temperature (TJ) -- (°C)

Ratio of VGT / VGT(TJ = 25°C)

150

0.0

0.5

1.0

1.5

2.0

2.5

-40 -1510356085110 135150

Junction Temperature (T

) -- (°C)

Ratio of I

/ I

= 25°C)

Figure 3: Normalized DC Holding Current

vs. Junction Temperature

Figure 4: On-State Current vs. On-State

Voltage (Typical)

0.0

0.5

1.0

1.5

2.0

-40 -1510356085110 135

Junction Temperature (TJ) -- (°C)

Ratio of IH / IH(TJ = 25°C)

150

0.7 0.8 0.9 1.01.1 1.21.3 1.41.5 1.61.7 1.8

Instantaneous On-state Voltage (vT) – Volts

Instantaneous On-state Current (iT) – Amps

Figure 5: Power Dissipation (Typical) vs. RMS

On-State Current

Figure 6: Maximum Allowable Case Temperature

vs. RMS On-State Current

0510 15 20 25 30 35 40

RMS On-State Current [IT(RMS)] -- Amps

Average On-State Power Dissipation

[PD(AV)] -- Watts

100

110

120

130

140

150

160

0510 15 20 25

RMS On-State Current [IT(RMS)] - Amps

Maximum Allowable Case Temperature (TC) - °C

HQ6025LH5

HQ6025RH5

HQ6025NH5

HQ6025KH5

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 360°

132

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

100

120

140

160

0.0 0.5 1.01.5 2.0 2.5 3.0

RMS On-State Current [IT(RMS)] -- Amps

Maximum Allowable Ambient Temperature

) - °C

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 180°

FREE AIR RATING

Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current

100

1000

110100 1000

Surge Current Duration -- Full Cycles

Peak Surge (Non-repetitive)

On-state Current (ITSM) – Amps

Figure 8: Surge Peak On-State Current vs. Number of Cycles

SUPPLY FREQUENCY: 60 Hz Sinusoidal

LOAD: Resistive

RMS On-State Current: [IT(RMS)]: Maximum Rated Value at

Speciﬁed Case Temperature

Notes:

1. Gate control may be lost during and immediately

following surge current interval.

2. Overload may not be repeated until junction

temperature has returned to steady-state

rated value.

133

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Soldering Parameters

Reﬂow Condition Pb – Free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp)

(TL) to peak 5°C/second max

TS(max) to TL - Ramp-up Rate 5°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Temperature (tL)60 – 150 seconds

Peak Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 5°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

Physical Speciﬁcations Environmental Speciﬁcations

Test Speciﬁcations and Conditions

High Temperature

Voltage Blocking

MIL-STD-750: Method 1040, Condition A

Rated VRRM, 150°C, 1008 hours

Temperature Cycling

MIL-STD-750: Method 1051

-40°C to 150°C, 15-minute dwell,

100 cycles

Biased Temp &

Humidity

EIA/JEDEC: JESD22-A101

320VDC, 85°C, 85%RH, 1008 hours

High Temp. Storage MIL-STD-750: Method 1031

150°C, 1008 hours

Low-Temp Storage -40°C, 1008 hours

Thermal Shock

MIL-STD-750: Method 1056

0°C to 100°C, 5-minute dwell,

10-second transfer, 10 cycles

Autoclave

(Pressure Cooker Test)

EIA/JEDEC: JESD22-A102

121°C, 100%RH, 2atm, 168 hours

Resistance to

Solder Heat

MIL-STD-750: Method 2031

260°C, 10 seconds

Solderability ANSI/J-STD-002, Category 3, Test A

Lead Bend MIL-STD-750: Method 2036, Condition E

Terminal Material Copper Alloy

Terminal Finish 100% Matte Tin Plated

Body Material UL recognized epoxy meeting ammability

classication 94V-0

Design Considerations

Careful selection of the correct device for the application’s

operating parameters and environment will go a long way

toward extending the operating life of the Thyristor. Good

design practice should limit the maximum continuous

current through the main terminals to 75% of the device

rating. Other ways to ensure long life for a power discrete

semiconductor are proper heat sinking and selection of

voltage ratings for worst case conditions. Overheating,

overvoltage (including dv/dt), and surge currents are

the main killers of semiconductors. Correct mounting,

soldering, and forming of the leads also help protect

against component damage.

Time

Temperature

TS(max)

TS(min)

time to peak temperature

Preheat

eat

Ramp-upRamp-up

Ramp-down

134

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead

Dimensions — TO- 220AB (L Package) — Isolated Mounting Tab

ØE

MT2

.276

7. 01

.526

13.36

.320

8.13

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs. (0.904 Nm.)

TC MEASURING POINT AREA (REF. ) 0.17 IN2

NOTCH IN

GATE LEAD

TO ID.

NON-ISOLATED

TAB

MT1 MT2 GATE

ØE

.320

8.13

.526

13.36

.276

7. 01

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs. (0.904 Nm.)

TC MEASURING POINT AREA (REF. ) 0.17 IN2

MT1 MT2 GATE

Dimension Inches Millimeters

Min Max Min Max

A 0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C 0.230 0.250 5.84 6.35

D 0.590 0.620 14.99 15.75

E 0.142 0.147 3.61 3.73

F 0.110 0.130 2.79 3.30

G 0.540 0.575 13.72 14.61

H 0.025 0.035 0.64 0.89

J 0.195 0.205 4.95 5.21

K 0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M 0.085 0.095 2.16 2.41

N 0.018 0.024 0.46 0.61

O 0.178 0.188 4.52 4.78

P 0.045 0.060 1.14 1.52

R 0.038 0.048 0.97 1.22

Dimension Inches Millimeters

Min Max Min Max

A 0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C 0.230 0.250 5.84 6.35

D 0.590 0.620 14.99 15.75

E 0.142 0.147 3.61 3.73

F 0.110 0.130 2.79 3.30

G 0.540 0.575 13.72 14.61

H 0.025 0.035 0.64 0.89

J 0.195 0.205 4.95 5.21

K 0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M 0.085 0.095 2.16 2.41

N 0.018 0.024 0.46 0.61

O 0.178 0.188 4.52 4.78

P 0.045 0.060 1.14 1.52

R 0.038 0.048 0.97 1.22

135

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Dimensions — TO- 218AC (K Package) — Isolated Mounting Tab

U (diameter)

M Package

MT2 / Anode

Gate

MT2

MT1

Note: Maximum torque

to be applied to mounting

tab is 8 in-lbs. (0.904 Nm).

Measurement Point Dimension Inches Millimeters

Min Max Min Max

A 0.810 0.835 20.57 21.21

B 0.610 0.630 15.49 16.00

C 0.178 0.188 4.52 4.78

D 0.055 0.070 1.40 1.78

E 0.487 0.497 12.37 12.62

F 0.635 0.655 16.13 16.64

G 0.022 0.029 0.56 0.74

H 0.075 0.095 1.91 2.41

J 0.575 0.625 14.61 15.88

K 0.211 0.219 5.36 5.56

L 0.422 0.437 10.72 11.10

M 0.058 0.068 1.47 1.73

N 0.045 0.055 1.14 1.40

P 0.095 0.115 2.41 2.92

Q 0.008 0.016 0.20 0.41

R 0.008 0.016 0.20 0.41

U 0.159 0.163 4.04 4.14

W 0.085 0.095 2.17 2.42

Product Selector

Part Number Voltage Gate Sensitivity Package

400V 600V 800V 1000V

HQ6025RH5 X 50 mA TO-220R

HQ6025NH5 X 50 mA TO-263

HQ6025LH5 X 50 mA TO-220L

HQ6025KH5 X 50 mA TO-218K

Dimensions — TO-263AB (N-Package) — D2 -PAK Surface Mount

MT1

MT2

MEASURING POINT

.320

8.13

.276

7.01.331

8.41

GATE

.460

11.68

.665

16.89

.260

6.60

.150

3.81

.080

2.03

.085

2.16

.055

1.40

.350

8.89

.276

7.01

.276

7.01

AREA: 0.11 IN

Dimension Inches Millimeters

Min Max Min Max

A 0.360 0.370 9.14 9.40

B 0.380 0.420 9.65 10.67

C 0.178 0.188 4.52 4.78

D 0.025 0.035 0.64 0.89

E 0.045 0.060 1.14 1.52

F 0.060 0.075 1.52 1.91

G 0.095 0.105 2.41 2.67

H 0.092 0.102 2.34 2.59

J 0.018 0.024 0.46 0.61

K 0.090 0.110 2.29 2.79

S 0.590 0.625 14.99 15.88

V 0.035 0.045 0.89 1.14

U0.002 0.010 0.05 0.25

W 0.040 0.070 1.02 1.78

136

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

25 Amp High Temperature Alternistor Triacs

HQ6025xH5 Series

Part Numbering System Part Marking System

HQ 60 25 LH5 81

LEAD FORM DIMENSIONS

xx: Lead Form Option

SENSITIVITY & TYPE

H5: 50mA

PACKAGE TYPE

L: TO-220 AB (Isolated)

K: TO-218 AC (Isolated)

R: TO-220AB (Non-isolated)

N: TO-263 (D2 Pak)

VOLTAGE RATING

60: 600V

CURRENT RATING

25: 25A

DEVICE TYPE

HQ: Triac

TO-218AC (K Package)

HQ6025KH5

YMLXX

HQ6025RH5

HQ6025LH5

Gate

MT1

MT2

0.512 (13.0) Arbor

Hole Dia.

0.945

(24.0)

0.63

(16.0)

1.01

(25.7)

12.99

(330.0)

0.827

(21.0)

0.157

(4.0)

Direction of Feed

Dimensions

are in inches

(and millimeters).

*Cover tape

0.059 DIA

(1.5)

TO-263 Embossed Carrier Reel Pack (RP) Speciﬁcations

Meets all EIA-481-2 Standards

Packing Options

Part Number Marking Weight Packing Mode Base Quantity

HQ6025RH5 HQ6025RH5 2.2g Bulk 500

HQ6025RH5TP HQ6025RH5 2.2g Tube 500 (50 per tube)

HQ6025NH5TP HQ6025NH5 1.6g Tube 500 (50 per tube)

HQ6025NH5RP HQ6025NH5 1.6g Embossed Carrier 500

HQ6025LH5TP HQ6025LH5 2.2g Tube 500 (50 per tube)

HQ6025KH5TP HQ6025KH5 4.4g Tube 250 (25 per tube)