TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 1 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Applications
CDMA / LTE handsets
Data card
Mobile router
Extension PCS Band Class 14
LTE Band 25
Product Features
Excellent triple beat performance: −88 dBc
Highly selective BAW duplexer achieving low
insertion loss over full bandwidth and operating
conditions.
Downlink isolation of 50 dB minimum & GPS
rejection of >40 dB eliminating the need for a
transmit filter
Single-Ended (SE) 50 Ohm Downlink & Uplink Ports
Performance −30 to +85 °C
RoHS compliant, Pb-free module package
General Description
The TQM963001 is a high-performance Bulk Acoustic
Wave (BAW) duplexer designed to meet the strict CDMA
requirements in the PCS extension band BC14 and
provide excellent insertion loss, cross isolation and
linearity for LTE B25.
TQM963001 is specifically designed to meet the high
performance expectations of insertion loss, isolation and
triple beat for CDMA systems over the extended
bandwidth of BC14 applications under all operating
conditions. Exceptional downlink isolation and GPS
rejection performance eliminates the need for an uplink
SAW filter.
The TQM963001 uses common module packaging
techniques to achieve the industry standard 2.6 x 2.1 x
0.9 mm footprint. This duplexer exhibits excellent powe
r
handling capabilities.
8 Pin 2.6 x 2.1 mm Package
Pin Configuration
Pin # Symbol
1 DL (Downlink)
3 UL (Uplink)
6 Ant (Antenna)
8 GND (Optional)
2, 4, 5, 7, Center Pad GND
Ordering Information
Part No. Description
TQM963001 BC14 / B25 BAW Duplexer
TQM963001-PCB Evaluation Board
Standard T/R size = 2500 pieces on a 7” reel.
Functional Block Diagram
Top View
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 2 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Absolute Maximum Ratings
Parameter Rating
Storage Temperature −40 to +85 °C
RF Input Power
CW, 5000 hours, 50 Ω,T = 25 °C +29 dBm
Operation of this device outside the parameter ranges
given above may cause permanent damage.
Recommended Operating Conditions
Parameter Min Typ Max Units
TCASE −30 +85 °C
The duplexer will function over the recommended range without
degradation in reliability or permanent change in performance.
Electrical Specifications(1,2) Antenna−Uplink
Test conditions unless otherwise noted: Temp. = −30 °C to +85 °C
Parameter Conditions Min Typ(3) Max Units
Insertion Loss 1850 – 1915 MHz (B25) 1.8 3.8 dB
Return Loss 1850 – 1915 MHz (Antenna Port) 9 12 dB
1850 – 1915 MHz (Uplink Port) 11 15
Attenuation
10 – 728 MHz 30 42
dB
728 – 768 MHz 30 43
869 – 894 MHz 35 46
1565 – 1587 MHz (GPS) 40 50
1597 – 1606 MHz (Glonass) 42 51
1606 – 1680 MHz 30 44
1930 – 1995 MHz (B25 Downlink) 40 53
2110 – 2155 MHz (AWS Downlink 34 39
2400 – 2500 MHz (ISM) 26 30
3700 – 3830 MHz (2 f0) 20 26
5150 – 5350 MHz (WiFi) 15 24
5550 – 5745 MHz (3 f0) 15 22
7390 – 7670 MHz (4 f0) 10 21
Amplitude Variation(4) 1850 – 1915 MHz (B25) 0.7 1.7 dB
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 3 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Electrical Specifications(1,2) Antenna−Downlink
Test conditions unless otherwise noted: Temp. = −30 °C to +85 °C
Parameter Conditions Min Typ(3) Max Units
Insertion Loss 1930 – 1995 MHz (B25) 2.2 5.1 dB
Return Loss 1930 – 1995 MHz (Antenna Port) 9 11 dB
1930 – 1995 MHz (Downlink Port) 9 11
Attenuation
815 – 849 MHz (BC0 Uplink) 20 32
dB
1850 – 1915 MHz (B25 Uplink) 45 63
2400 – 2484 MHz (ISM band) 30 43
2484 – 8000 MHz 25 47
Amplitude Variation(4) 1930 – 1995 MHz (B25) 1.3 1.8 dBp-p
Linearity (Triple Beat Test)(6) Ratio of CW jammer to triple beat product at
downlink port. Temp=+25 °C −88(5) −79 dBc
Electrical Specifications(1,2) Uplink−Downlink Isolation
Test conditions unless otherwise noted: Temp. = −30 °C to + 85 °C
Parameter Frequency Band Min Typ(3) Max Units
Isolation
1850 – 1915 MHz (B25) 51 62
dB
1930 – 1995 MHz (B25) 47 54
1574 – 1577 MHz (GPS) 40 56
3700 – 3830 MHz (2 f0) 53 64
5540 – 5745 MHz (3 f0) 49 59
Mid band Isolation(4) 1915 – 1930 MHz, Temp=+25 °C 20 dB
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design.
2. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over
temperature.
3. Typical values are averages over specified band, unless otherwise noted.
4. Integrated over any 1.25 MHz channel within band.
5. Worst case over specified frequencies.
6. Test conditions defined as follows:
Uplink port: Two CW signals at fuplink and fuplink+1MHz and Pout=+21.5 dBm per tone measured at the DUT antenna port;
Antenna port: CW jammer at fdownlink= fuplink+ 80 MHz and Pin=−30 dBm.
Triple Beat Ratio is defined as the ratio of the CW jammer to the triple-beat product at the downlink port for fuplink =1851
MHz, 1882 MHz, and 1913 MHz.
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 4 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
TQM963001-PCB Evaluation Board
Notes:
1. Top, middle & bottom layers: 1 oz copper
2. Substrates: FR4 dielectric, .031” thick
3. Finish plating: Nickel: 3-8µm thick,
Gold: .03-.2µm thick
4. Hole plating: Copper min .0008µm thick
Notes:
1. Light grey indicates metalized area
2. Dark grey indicates pad areas
3. This footprint represents a recommendation only
4. For solder pad recommendation see mechanical
information
Pin 8 can be connected to ground or left floating
UL In
DL Out 2, 3, 5, 7
Center Pad
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 5 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Downlink Performance Plots - TQM963001-PCB Temp=25°C
1800 1850 1900 1950 2000 2050 2100
Frequency (MHz)
Downlink Antenna Narrowband Response
-70
-60
-50
-40
-30
-20
-10
0
|S21| (dB)
1920 1940 1960 1980 2000 2020
Frequency (MHz)
Downlink Antenna Pass Band
-5
-4
-3
-2
-1
0
|S21| (dB)
0 1000 2000 3000 4000 5000 6000 7000 8000
Frequency (MHz)
Downlink Antenna Wideband Response
-70
-60
-50
-40
-30
-20
-10
0
|S21| (dB)
1920 1940 1960 1980 2000 2020
Frequency (MHz)
Downlink Return Loss
-25
-20
-15
-10
-5
0
|S11| (dB)
0
1.0 1.0-1.0
10.0
10.0
-10.0
5.0
5.0
-5.0
2.0
2.0
-2.0
3.0
3.0
-3.0
4.0
4.0
-4.0
0.2
0.2
-0.2
0.4
0.4
-0.4
0.6
0.6
-0.6
0.8
0.8
-0.8
Downlink Impedance in Downlnk Band
Swp Max
1995MHz
Swp Min
1930MHz
0
1.0 1.0-1.0
10.0
10.0
-10.0
5.0
5.0
-5.0
2.0
2.0
-2.0
3.0
3.0
-3.0
4.0
4.0
-4.0
0.2
0.2
-0.2
0.4
0.4
-0.4
0.6
0.6
-0.6
0.8
0.8
-0.8
Antenna Impedance in Downlink Band
Swp Max
1995MHz
Swp Min
1930MHz
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 6 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Uplink Performance Plots – TQM963001-PCB Temp=25°C
1800 1850 1900 1950 2000 2050 2100
Frequency (MHz)
Uplink Antenna Narrowband Response
-70
-60
-50
-40
-30
-20
-10
0
|S21| (dB)
1830 1850 1870 1890 1910 1930
Frequency (MHz)
Uplink Antenna Pass Band
-5
-4
-3
-2
-1
0
|S21| (dB)
0 1000 2000 3000 4000 5000 6000 7000 8000
Frequency (MHz)
Uplink Antenna Wideband Response
-70
-60
-50
-40
-30
-20
-10
0
|S21| (dB)
1830 1850 1870 1890 1910 1930
Frequency (MHz)
Uplink Return Loss
-25
-20
-15
-10
-5
0
|S11| (dB)
0
1.0 1.0-1.0
10.0
10.0
-10.0
5.0
5.0
-5.0
2.0
2.0
-2.0
3.0
3.0
-3.0
4.0
4.0
-4.0
0.2
0.2
-0.2
0.4
0.4
-0.4
0.6
0.6
-0.6
0.8
0.8
-0.8
Uplink Impedance in Uplink Band
Swp Max
1915MHz
Swp Min
1850MHz
0
1.0 1.0-1.0
10.0
10.0
-10.0
5.0
5.0
-5.0
2.0
2.0
-2.0
3.0
3.0
-3.0
4.0
4.0
-4.0
0.2
0.2
-0.2
0.4
0.4
-0.4
0.6
0.6
-0.6
0.8
0.8
-0.8
Antenna Impedance in Uplink Band
Swp Max
1915MHz
Swp Min
1850MHz
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 7 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Isolation/Antenna Return Loss – TQM963001-PCB Temp=25°C
Pin Configuration and Description
7
1
5
32
6
8 4
DL UL
Ant
GND GND
GND
GND GND
Pin No. Symbol Description
1 DL Downlink input
3 UL Uplink output
6 Ant Antenna port
8 GND
(i l
Internally connected to ground, but no external connection required.
2, 4, 5, 7, Center Pad GND RF ground
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 8 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
PCB Mounting Pattern
NOTES:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Vias are required under the TBD of this device for proper RF/DC grounding and thermal dissipation. We recommend a
0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Mechanical Information
Package Marking and Dimensions
Marking: Part number – 3001
Lot Code – XXXX
NOTES:
1. All dimensions are in millimeters. Angles are in degrees.
2. Except where noted, this part outline conforms to JEDEC standard MO-220, Issue E (Variation VGGC) for thermally
enhanced plastic very thin fine pitch quad flat no lead package (QFN).
3. Dimension and tolerance formats conform to ASME Y14.4M-1994.
4. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
UL DL
3001
XXXX
Pin 1 Indicator
Center Pad
TQM963001
BC14 / B25 BAW Duplexer
Datasheet: Rev. D 05-19-14 - 9 of 9 - Disclaimer: Subject to change without notice
© 2014 TriQuint
www.tri
q
uint.com
Product Compliance Information
ESD Sensitivity Ratings
Caution! ESD-Sensitive Device
ESD Rating: Class 1B
Value: ≥ 500 V to < 1000 V
Test: Human Body Model (HBM)
Standard: ESDA/JEDEC Standard JS-001-2012
ESD Rating: Class B
Value: > 200 V to < 400 V
Test: Machine Model (MM)
Standard: JEDEC Standard JESD22-A115-A
Solderability
Compatible with both lead-free (260 °C max. reflow
temperature) and tin/lead (245 °C max. reflow
temperature) soldering processes.
Package contact plating: Ni/Au
RoHs Compliance
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
MSL Rating: Level 3
Test: 260 °C convection reflow
Standard: JEDEC Standard IPC/JEDEC J-STD-020
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The
information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with
such information is entirely with the user.
A
ll information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself o
r
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information
about TriQuint:
Web: www.triquint.com Tel: +1.407.886.8860
Email: info-sales@triquint.com Fax: +1.407.886.7061
For technical questions and application information:
Email: sjcapplications.engineering@triquint.com
