DIODE MODULE DD90F/KD90F UL;E76102 M Power Diode Module DD90F series are designed for various rectifier circuits. DD90F has two diode chips connected in series in 25mm (1inch) width package and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1600V is avaiable for various input voltage. 2- 6 92 20 20 Isolated 25 12.5 12 mounting base elements in a package for simple (single and three phase) bridge connections Highly reliable glass passivated chips High surge current capability 20 Two DD 6.5 31max 19.5 4.0 Applications Various rectifiers, Battery chargers, DC motor drives M5X10 800.2 KD Unita Maximum Ratings Symbol Tj25 unless otherwise specified Item Ratings DD90F40 DD90F80 DD90F120 DD90F160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V Ratings Unit Symbol Item Conditions IFAV Average Forward Current Single phase, half wave, 180conduction, Tc93 IF (RMS) R.M.S. Forward Current Single phase, half wave, 180conduction, Tc93 IFSM Surge Forward Current 1 2 cycle, It Value for one cycle of surge current It 2 VISO 2 50/60HZ, peak value, non-repetitive Isolation Breakdown VoltageR.M.S A.C.1minute 90 A 140 A A 2100/2300 22000 A2S 2500 V Tj Junction Temperature -40 to 125 Tstg Storage Temperature -40 to 125 Nm fB Mounting Torque MountingM5 Recommended Value 1.5-2.515-25 2.728 TerminalM5 Recommended Value 1.5-2.515-25 2.728 Mass 170 g Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave. Tj125 VFM Forward Voltage Drop, max. Forward current 285ATj25Inst. measurement Junction to case 0.27 /W Rthj-c Thermal Impedance, max. Conditions Ratings Unit 20 mA 1.40 V 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/ DD90F/KD90F Average Forward Current vs. Power Dissipation Maximum Forward Characteristics Power Dissipation PavW 10 Forward Current IA F Per one element D.C. 10 Single Phase Three Phase Max. Average Forward Current vs. Allowable Case Temperature D.C. Three Phase Single Phase Transient Thermal Impedance j-c/W Per one element = start 60Hz 50Hz Average Forward CurrentA . Per one element Cycle Surge Forward Current Rating Non-Repetitive Surge Forward CurrentA Allowable Case Temperature Tc Average Forward CurrentA Forward Voltage DropV TimeCycles Transient Thermal Impedance Per one element Junction to Case . . . . BTwo Pluse Bridge connection IdAv Rth:1.0/W Rth:0.8/W Rth:0.6/W Rth:0.4/W Rth:0.2/W Rth:0.1/W B2 Output CurrentA Output Current BSix pulse Bridge connection Id(AV) Rth:1.0/W Rth:0.8/W Rth:0.6/W Rth:0.4/W Rth:0.2/W Rth:0.1/W B6 Ambient Temperature Allowable Case Temperature Time tsec Total Power DissipationW Output Current Total Power DissipationW Allowable Case Temperature Output CurrentA Ambient Temperature SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/