ETX-BT
ETX Module with Intel
®
Atom™ Processor E3800 Series SoC
Features
●
Single, dual or quad-core Intel
®
Atom™ SoC or Celeron
®
Processor
●
Single SODIMM for up to 4GB DDR3L Up to 4 GB Single SODIMM
DDR3L at 1333 MHz
●
Dual channel 24-bit LVDS, analog VGA
●
2 SATA or 2 PATA (Master only), 4x USB 2.0, 10/100 Mbps LAN
(GbE via onboard connector)
●
Extreme Rugged operating temperature: -40°C to +85°C
(build option)
●
Supports Smart Embedded Management Agent (SEMA) functions
Specications
● Core System
CPU
Single, dual or quad-core Intel
®
Atom™ or Celeron
®
Processor
Atom™ E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)
Atom™ E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)
Atom™ E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)
Atom™ E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)
Atom™ E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)
Celeron
®
N2930 1.83 GHz, 400/756 (Turbo) 7.5W (4C/1066)
Celeron
®
J1900 2.00 GHz, 688/792 (Turbo) 10W (4C/1333)
Supports: Single, dual or quad Out-of-Order Execution (OOE) processor
cores, Intel
®
VT-x, Intel
®
SSE4.1 and SSE4.2, Intel
®
64 architecture, IA 32-bit ,
PCLMULQDQ Instruction DRNG, Intel
®
Thermal Monitor (TM1 & TM2)
Note: Availability of features may vary between processor SKUs.
Memory
Single SODIMM socket for up to 4 GB non-ECC
1333/1066 MHz DDR3L memory
Embedded BIOS
AMI EFI with CMOS backup in 8MB SPI BIOS
Cache
Primary 32 kB, 8-way L1 instruction cache and 24 kB, 6-way L1 write-back
data cache
Expansion Busses
PCI 32-bit rev 2.3 at 33MHz supporting 4 bus masters ISA 16-bit (through
LPC-ISA bridge), no DMA support SMBus (system) , I
2
C (user)
SEMA Board Controller
Supports: Voltage/Current monitoring, Power sequence debug support, AT/
ATX mode control, Logistics and Forensic information, Flat Panel Control,
General Purpose I2C, Watchdog Timer
Debug Headers
40-pin multipurpose at cable connector
Use in combination with DB-40 debug module providing BIOS POST code
LEDs, BMC access, SPI BIOS ashing, power testpoints, debug LEDs
● Audio
Chipset
Intel
®
HD Audio integrated in SOC
Audio Codec
Realtek ALC 262, 4-channel High Denition Audio
● Ethernet
Type: Intel
®
i211 (MAC/PHY) Ethernet controller
Interface: 10/100 Mbps LAN (GbE via onboard connector)
● Video
GPU Feature Support
7th generation graphics Intel core architecture with four Execution Units,
supporting two independent displays
3D graphics hardware acceleration
Support for DirectX 11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2
Video decode hardware acceleration including support for H.264, MPEG2,
MVC, VC-1, WMV9 and VP8
Video encode hardware acceleration including support for H.264, MPEG2 and
MVC formats
VGA
Analog VGA supporting resolutions of up to 2560 x 1600@60Hz, 24bpp
LVDS
Single/dual channel 18/24-bit LVDS from eDP (two lane)
Note: “Build option” indicates an alternative BOM conguration to support additional or alternative functions that are not available on the standard product.
Be aware that part numbers for SKUs with “build options” will need to be created and may cause production lead times.