ETX-BT ETX Module with Intel(R) AtomTM Processor E3800 Series SoC Features Single, dual or quad-core Intel(R) AtomTM SoC or Celeron(R) Processor Single SODIMM for up to 4GB DDR3L Up to 4 GB Single SODIMM DDR3L at 1333 MHz Dual channel 24-bit LVDS, analog VGA 2 SATA or 2 PATA (Master only), 4x USB 2.0, 10/100 Mbps LAN Extreme Rugged operating temperature: -40C to +85C (GbE via onboard connector) (build option) Supports Smart Embedded Management Agent (SEMA) functions Specifications Core System CPU Single, dual or quad-core Intel(R) AtomTM or Celeron(R) Processor AtomTM E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333) AtomTM E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333) AtomTM E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066) AtomTM E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066) AtomTM E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066) Celeron(R) N2930 1.83 GHz, 400/756 (Turbo) 7.5W (4C/1066) Celeron(R) J1900 2.00 GHz, 688/792 (Turbo) 10W (4C/1333) Supports: Single, dual or quad Out-of-Order Execution (OOE) processor cores, Intel(R) VT-x, Intel(R) SSE4.1 and SSE4.2, Intel(R) 64 architecture, IA 32-bit , PCLMULQDQ Instruction DRNG, Intel(R) Thermal Monitor (TM1 & TM2) Note: Availability of features may vary between processor SKUs. Memory Single SODIMM socket for up to 4 GB non-ECC 1333/1066 MHz DDR3L memory Embedded BIOS AMI EFI with CMOS backup in 8MB SPI BIOS Cache Primary 32 kB, 8-way L1 instruction cache and 24 kB, 6-way L1 write-back data cache Expansion Busses PCI 32-bit rev 2.3 at 33MHz supporting 4 bus masters ISA 16-bit (through LPC-ISA bridge), no DMA support SMBus (system) , I2C (user) Audio Chipset Intel(R) HD Audio integrated in SOC Audio Codec Realtek ALC 262, 4-channel High Definition Audio Ethernet Type: Intel(R) i211 (MAC/PHY) Ethernet controller Interface: 10/100 Mbps LAN (GbE via onboard connector) Video GPU Feature Support 7th generation graphics Intel core architecture with four Execution Units, supporting two independent displays 3D graphics hardware acceleration Support for DirectX 11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2 Video decode hardware acceleration including support for H.264, MPEG2, MVC, VC-1, WMV9 and VP8 Video encode hardware acceleration including support for H.264, MPEG2 and MVC formats VGA Analog VGA supporting resolutions of up to 2560 x 1600@60Hz, 24bpp LVDS Single/dual channel 18/24-bit LVDS from eDP (two lane) SEMA Board Controller Supports: Voltage/Current monitoring, Power sequence debug support, AT/ ATX mode control, Logistics and Forensic information, Flat Panel Control, General Purpose I2C, Watchdog Timer Debug Headers 40-pin multipurpose flat cable connector Use in combination with DB-40 debug module providing BIOS POST code LEDs, BMC access, SPI BIOS flashing, power testpoints, debug LEDs Note: "Build option" indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product. Be aware that part numbers for SKUs with "build options" will need to be created and may cause production lead times. Specifications Multi I/O and Storage USB: 4 ports USB 2.0 PATA: up to two PATA IDE supporting Master only through SATA-to-PATA controller SATA: 2 SATA 3Gb/s ports, shared with PATA (Default is port 1: PATA, port 2: SATA. Other PATA/SATA configurations are "build options".) SSD: optional SATA SSD 4 - 64GB (occupies second SATA port) Super I/O Chipset: Nuvoton W83627DHG-PT Serial: Two high speed RS-232C ports (COM1/COM2) IrDA: Supports IrDA 1.0 SIR protocol or Sharp ASK-IR protocol Parallel: SPP, ECP and EPP mode support (LPT1) Keyboard Mouse: PS/2 type keyboard and mouse Power Standard Input: ATX = 5V5% / 5Vsb 5% or AT = 5V5% Management: ACPI 4.0 compliant, Smart Battery support Power States: C0, C1, C1E, C4, C6; S0, S3, S4, S5 (Wake on USB S3/S4, WOL S3/S4/S5) ECO mode: Supports deep S5 (ECO mode) for power saving Mechanical and Environmental Form Factor: ETX Rev 3.02 Dimension: 114 mm x 95 mm Operating Temperature Standard Operating Temperature: 0C to +60C Screened Extreme RuggedTM Operating Temperature: -40C to +85C (build option) Humidity 5-90% RH operating, non-condensing 5-95% RH storage (operating with conformal coating) Shock and Vibration IEC 60068-2-64 and IEC-60068-2-27 MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test Operating Systems Standard Support Windows 7/8 32/64-bit, Linux 32/64-bit Extended Support (BSP) WES7/8, WEC7/8, Linux, VxWorks Note: "Build option" indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product. Be aware that part numbers for SKUs with "build options" will need to be created and may cause production lead times. Functional Diagram Flat cable connector on module GbE 10/100 MHz GbE Intel i211 SODIMM PCIe port 3 1-4 GB DDR3L non ECC SMBus I2C SEMA SMC SPI 0 BIOS LM73 SPI 1 BIOS LPC to ISA Fintek F85226A LPC 25MHz SATA to PATA 1 ISA (Master only) SATA 1x SATA 3Gb/s (port 1) SATA (Master only) 1x SATA 3Gb/s (port 2) Build Option 1 SATA to PATA (default) or SATA (formerly "Bay Trail") Flat cable connector on module Build Option 2 SATA (default) or SATA to PATA or SATA SSD SATA SSD LVDS eDP-to-LVDS PS/2 Keyboard PS/2 Mouse LPT1 COM1 / COM2 PCIe-to-PCI XIO2001 PCIe port 2 HD Audio Analog VGA LVDS 24-bit DDI 1 4 lanes DP FPC Intel(R) AtomTM E3800 SoC SATA to PATA 2 Codec ALC262 4x USB 1.1/2.0 DDI 0 eDP 2 lanes LPC 25 MHz Super IO Winbond W83627DHG-PT TPM Atmel AT97SC3204 PCI Ordering Information Accessories ETX-BT-E3845 ETX Module with Intel(R) AtomTM E3845, 1.91 GHz 542/792 (Turbo), 10W (4C/1333) Heat Spreaders ETX-BT-E3827 ETX Module with Intel(R) AtomTM E3827, 1.75 GHz 542/792 (Turbo), 8W (2C/1333) ETX-BT-E3826 ETX Module with Intel(R) AtomTM E3826, 1.46 GHz 533/667 (Turbo), 7W (2C/1066) ETX-BT-E3825 ETX Module with Intel(R) AtomTM E3825, 1.33 GHz 533 (No Turbo), 6W (2C/1066) ETX-BT-E3815 ETX Module with Intel(R) AtomTM E3815, 1.46 GHz 400 (No Turbo), 5W (1C/1066) ETX-BT-J1900 ETX Module with Intel(R) AtomTM J1900, 2 GHz, 688/792 (Turbo), 10W (4C/1333) ETX-BT-N2807 ETX Module with Intel(R) Celeron(R) N2807, 2.16 GHz 4.5W (2C) ETX-BT-N2930 ETX Module with Intel(R) AtomTM N2930, 1.86 GHz, 400/756 (Turbo), 7.5W (4C/1066) HTS-eBT-B Heatspreader for ETX-BT with threaded standoffs for bottom mounting HTS-eBT-BT Heatspreader for ETX-BT with through-hole standoffs for top mounting Passive Heatsinks THS-eBT-BL Low profile heatsink for ETX-BT with threaded standoffs for bottom mounting THS-eBT-BTL Low profile heatsink for ETX-BT with through-hole standoffs for top mounting Active Heatsink THSF-eBT-B High profile heatsink for ETX-BT with threaded standoffs for bottom mounting www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Mar. 01, 2017. (c)2017 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: ETX-BT-E3845 ETX-BT-E3825 ETX-BT-E3815 ETX-BT-E3805 ETX-BT-N2930 ETX-BT-E3826 ETX-BT-N2807 ETX-BT-E3827 ETX-BT-J1900