HS201DR Series
•
35 & 38 amp AC output @ 40°C
•
Dual Channel output
•
4 to 32 VDC input control voltage
•
DIN Rail mounted
•
UL, cUL, CE approved SSRs
PRODUCT SELECTION
Description 35 A 38 A
4-32 VDC Control HS201DR-CC2425W3U HS201DR-CD4850W4U
OUTPUT SPECIFICATIONS (1)
Description HS201DR-CC2425W3U HS201DR-CD4850W4U
Operating Voltage (47-63Hz) [Vrms] 24-280 48-660
Transient Overvoltage [Vpk] 600 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.25
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500
Maximum Load Current [Arms] 35 38
Minimum Load Current [Arms] 0.15 0.15
Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] 275/300 710/750
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.3 1.7
Maximum I²t for fusing (50/60 Hz, 1/2 cycle) [A² sec] 380/370 2520/2320
Minimum Power Factor (with Maximum Load) 0.5 0.5
INPUT SPECIFICATIONS (1)
Description Parameters
Control Voltage Range 4-32 VDC
Minimum T urn -On Voltage 4.0 VDC
Minimum Tu rn -Of f Volta ge 1.0 VDC
Maximum Reverse Voltage 32 VDC
Typical Input Current 10 mA @ 12 VDC
Nominal Input Impeadance (3)
Maximum Turn-On Time [msec] 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohms
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -40 to 80ËšC
Ambient Storage Temperature Range -40 to 125ËšC
Status Indicator Display Yes
Weight (typical) 1.03 lb (453g)
Encapsulation Themall y Conductive Epoxy
Load Terminals Screw Torque Range 18-20 in/lbs (2.0-2.26 Nm)
Thermal pad installed Yes
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Input circuitry for DC control version incorporates active current limiter.
N
OTE: For more information see Evolution Dual spec sheet.
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
A
gency approvals are for relay only.
E116950
Rev. 110911
ANNEX - ENVIROMENTAL INFORMATION
