SPEC NO: DSAF1097 REV NO: V.7A DATE: MAR/16/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002009
1.6X1.25mm BI-COLOR SMD CHIP LED LAMP
Part Number: APTB1612ESGC-F01
High Efficiency Red
Super Bright Green
Features
z1.6mmx1.25mm SMT LED, 0.65mm thickness.
zBi-color,low power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF1097 REV NO: V.7A DATE: MAR/16/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002009
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTB1612ESGC-F01
High Efficiency Red (GaAsP/GaP)
Water Clear
8 15
120°
*3 *7
5 12
*5 *12
Super Bright Green (GaP)
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red
Super Bright Green
627
565 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red
Super Bright Green
617
568 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red
Super Bright Green
45
30 nm IF=20mA
C Capacitance High Efficiency Red
Super Bright Green
15
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red
Super Bright Green
2
2.2
2.5
2.5 V IF=20mA
IR Reverse Current High Efficiency Red
Super Bright Green 10
10 uA VR = 5V
Parameter High Efficiency Red Super Bright Green Units
Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 160 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAF1097 REV NO: V.7A DATE: MAR/16/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002009
APTB1612ESGC-F01
High Efficiency Red
SPEC NO: DSAF1097 REV NO: V.7A DATE: MAR/16/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002009
Super Bright Green
SPEC NO: DSAF1097 REV NO: V.7A DATE: MAR/16/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002009
APTB1612ESGC-F01
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAF1097 REV NO: V.7A DATE: MAR/16/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002009
PACKING & LABEL SPECIFICATIONS APTB1612ESGC-F01
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes