FC Type Fiber Optic Connectors u Correspond to Telcordia specification GR-326-CORE by plastic hood u Applicable for standard PC/UPC and APC (N-type, R-type) by selec- FC Type tion of plug frame and hood color Possible to use plug frame of R-type for standard PC/UPC application u Distinguishable N-type and R-type by the line at key portion of u plug frame u Possible to use same climping assembly method as SC by adaption of SC crimp ring and ring u Applicable products for PC/UPC: SZ-1A/3A and SFZ-3A ferrule and SAA-3 & 4 adaptor series u Applicable products for Angle PC: SNZ-1A/3A ferrule and SNA-1 & 3 adaptor series u Satisfies Vertical Burning Test for Classification Materials UL94V-0 (excluding cap) Housing ORDERING INFORMATION Model Number SAP-3 SAP-3 Series PC & Angle PC Application Designed for O 2.0 mm Cable O 2.4 mm Cable O 3.0 mm Cable Single Mode 2 3 5 8 Type Number 5 A 1 A 0 Hood Color Red White Blue Green D 0 D0 N type K0 R type Package 0 Bulk Hood I.D. (mm) 6 2.0 mm (Plastic) 7 3.0 mm (Plastic) A 2.4 mm (Plastic) 1 8 A B Marking of Hood 1 SII Cap Black (PVC) Green PVC Black Ferrule Cap Green Ferrule Cap u Compact and lightweight u Designed for o 0.9 mm Buffer Cable u Combined with SZ-1A/3A series (ferrule) provides high performance u Recommended adaptor: SAA series u Total length of 24 mm optimum for use inside system equipment and devices u Satisfies Vertical Burning Test for Classifying Materials UL94V-0 (excluding cap) u Widely used for LD/PD modules ORDERING INFORMATION Model Number SAP-4 Housing SAP-4 Series Designed for o 0.9 mm Buffer Cable Single Mode 1 2 3 4 5 Type Number 1 1 Hood Color Black Red White Grey Blue A 1 0 0 Package/Specifications Molded frame, 0D0 bulk package Cutout frame, 100 bulk package Molded frame, bulk package 1D0 (housing pre-assembled) Hood I.D. (mm) 1 0.9 mm 8 0.9mm (flame-resistant rubber) Marking of Hood 0 Without Marking 22 0 Cap 1 White cap A Black Ferrule Cap