1-66106-5 - Tyco Electronics

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support

Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425

specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514

are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts

Note: All part numbers are RoHS compliant.

Signal Contacts

Material and Finish —See chart.

Contact Body—Brass or phosphor bronze

Retention Spring—Stainless steel

Application Tooling—Page 29

Technical Documents

114-10004 Application Specification

108-10042 Product Specification

Type III+, Crimp, Snap-In

Socket

[.0625+.0010

–.0020

[1.588+0.025]

–0.051

Dia.

Max.

Dia.

Pin Body Spring, Stainless Steel

Spring,

Stainless Steel

Ferrule, Brass,

Nickel Flash

.530±.010

[13.46±0.25]

.113

[2.87]

.390

[9.91] Min.

Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡

Wire Size Ins. Contact Strip Form Loose Piece Tooling Part No.**

Range Dia. Finish Contact No. Contact No. Loose Piece Strip Form

AWG mm2Range Pin Socket Pin Socket Hand Tool Applicators

.015-.030 Gold/Nickel2788085-3 788088-2 — — 567867-1***

30-28 0.05-0.09 0.38-0.76 Sel. Gold/Nickel3788085-1 788088-1 788085-4 788088-3 90716-1 or 567947-1***

or 680602-□***

Bright Tin 1-66425-2 1-66424-1 — —

.040-.0601Gold/Nickel266425-7 66424-7 66429-3 66428-3 91515-16466598-□***

30-26 0.05-0.15 1.02-1.52 Sel. Gold/Nickel366425-8 66424-8 66429-4 66428-4

.014-.0301Gold/Nickel266393-7 66394-7 — —

0.36-0.76 Sel. Gold/Nickel366393-8 66394-8 66406-4 66405-4 90225-26466585-3***

Bright Tin 1-66106-5 1-66108-5 1-66107-1 1-66109-7 91515-16466321-□***

26-24 0.12-0.2 .035-.0551Gold/Nickel266106-7 66108-7 66107-3 66109-3 or or

0.89-1.40 Sel. Gold/Nickel366106-8 66108-8 66107-4 66109-4 58495-1* 466908-2***

Sel. Gold/Nickel4— 66108-1 — 66109-1

Bright Tin 2-66102-5 3-66104-0 1-66103-8 1-66105-9

.040-.0801Gold/Nickel266102-8 66104-8 66103-3 66105-3 91515-16466323-□***

1.02-2.03 Sel. Gold/Nickel366102-9 66104-9 66103-4 66105-4 or or

2-66102-272-66104-37— — 58495-1* 466907-2***

Sel. Gold/Nickel4— 66104-1 — 66105-1

24-20 0.2-0.6 .060-.120 5Bright Tin 1-66564-2 1-66563-1 66566-7 66565-7 466383-4***

1.52-3.05 Sel. Gold/Nickel366564-8 66563-8 66566-4 66565-4 91542-16or 466979-1***

or 567363-□***

Bright Tin 1-66332-4 1-66331-4 1-66400-0 1-66399-0 91523-16466324-□***

.080-.1001Gold/Nickel266332-7 66331-7 66400-3 66399-3 or or

2.03-2.54 Sel. Gold/Nickel366332-8 66331-8 66400-4 66399-4 90225-26466942-1***

Sel. Gold/Nickel4—66331-2 — 66399-2

1-66098-9S

Bright Tin 1-66098-8 1-66100-9 1-66099-5 1-66101-9 91505-16or 466325-□***

18-16 0.8-1.4 .080-.1001Gold/Nickel266098-8 66100-8 66099-3 66101-3 91523-16or or

2.03-2.54 Sel. Gold/Nickel366098-9 66100-9 66099-4 66101-4 58495-1* 466906-1***

Sel. Gold/Nickel466098-6 — 66099-1 —

Bright Tin 1-66359-4 1-66358-6 1-66361-2 1-66360-2

.080-.1001Phos Bronze 1-66359-5 1-66358-8 1-66359-5 1-66358-8 466326-□***

Gold/Nickel266359-9 66358-9 66361-3 66360-3 91519-16or

2.03-2.54

Sel. Gold/Nickel31-66359-0 1-66358-0 66361-4 66360-4 466923-2***

18-14 0.8-2.0 1-66359-2 1-66358-3 66361-8 66360-8

Sel. Gold/Nickel4— 66358-1 — 66360-1

.110-.150 5Bright Tin 66597-8 66598-9 66602-8 66601-9 466958-1***

1-66598-0 91521-16or

2.79-3.81 Sel. Gold/Nickel366597-2 66598-2 66602-2 66601-2 567364-□***

1Overall insulation crimp diameter, including crimp barrel, must not

exceed .125 [3.18].

2.000015 [0.00038] gold in the mating area over .000050 [0.00127]

min. nickel.

3.000030 [0.00076] gold in the mating area, with gold flash on remain-

der, over .000050 [0.00127] min. nickel.

4.000030 [0.00076] gold in the mating area, with gold gradient on

remainder, over .000050 [0.00127] min. nickel.

5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23-

24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.

6To use with the 626 Pneumatic Tool: remove crimping head from Straight

Action Hand Tool (SAHT), order SAHT Adapter Part No. 217201-1,

Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without),

and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot

actuated).

7Phosphor Bronze

SStandard reeling of strip form contacts.

*Commercial PRO-CRIMPER II hand tool for field repair only. Note:

Die Set can be adapted for use with 626 Pneumatic Tool System.

Insertion Tool Part No. 91002-1 (for insulation diameters .070 [1.78]

or less), No. 200893-2 (for insulation diameters .090 [2.29] max.).

Extraction Tool Part No. 305183. (Instruction Sheet 408-1216)

**There are power options available for these tools/dies. See Battery

Powered Crimp tool Kit and SDE Electric Terminator on page 30.

***Call Technical Support for Machine Applicator Part Numbers.

Socket

‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.

Refer to contact current carrying capability information on page 8.

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support

Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425

specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514

are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts

Material

Contact Body and Tab—Brass

Retention Spring—Stainless steel

Finish

See chart on Page 11.

Solder-Type

(with Preformed Wire

Barrel/Insulation Support)

Socket

Type III+, Solder Versions Spring, Stainless Steel

Localized Plate Area

Pin Body, Brass

1.085

[27.56] Max.

.825

[20.96] Max.

3.90

[9.91] Min.

.200

[5.08]

Min.

.0625+.0010

.0625–.0020

[1.588+.0254]Dia.

[1.588

–.0508

]

.530±.010

[13.46±0.25]

Signal Contacts (Continued)

Type III+, Crimp, Snap-In

Contact Size—16

Pin Diameter—.062 [1.57]

Material and Finish

Contact Body—Copper alloy, plated

tin or gold

Spring—Stainless steel

Wire Size Range Ins. Grounding Pin Part No. Strip Form Loose Piece

Dia. Contact Applicator Hand Tool**

[mm2] AWG Range1Finish Strip Form Loose Piece Part No. Part No.

.035-.055 Tin 164159-3 164162-1 —91515-13or

0.12-0.2 26-24 0.89-1.4 Sel. Gold/Nickel2164159-4 164162-2 58495-1*

.045-.070 Tin 164160-3 164163-1 466323-□*** 91515-13or

0.2-0.6 24-20 1.14-1.78 or91505-13or

Sel. Gold/Nickel2164160-4 164163-2 466907-2*** 58495-1*

.078-.098 Tin 164161-3 164164-1 466741-□*** 91523-13or

0.8-1.4 18-16 1.98-2.49 or 91505-13or

Sel. Gold/Nickel2164161-4 164164-2 680114-3*** 58495-1*

1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].

2Gold flash over .000030 [0.00076] min. nickel on entire contact, with .000030 [0.00076] gold in contact area.

3Touse with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No. (Call

Technical Support at 800-522-6752),Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuat-

ed) or 189722-1 (foot actuated).

*Commercial PRO-CRIMPER II hand tool for field repair only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.

**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.

***Call Technical Support at 1-800-522-6752 for Automatic Machine Applicator Part Numbers.

Extraction Tool Part No. 725840-1

Note: All part numbers are RoHS compliant.

Grounding Pin

(make first - break last)

Related Product Data

Application Tooling —Pages 75-78

Technical Documents

114-10004 Application Specification

108-10024-2 Product Specification

Enhanced High Current

Type III+, Crimp, Snap-In

Ratings

Multiplication Rating Factor (F)

Socket

[.0625+.0010

–.0020

[1.588+0.025]

–0.051

Dia.

Max.

Dia.

Pin Body Spring, Stainless Steel Spring,

Stainless Steel

Ferrule, Brass,

Nickel Flash

.530±.010

[13.46±0.25]

.113

[2.87]

.390

[9.91] Min.

Contact Size 16—Pin Diameter .062 [1.57]

Wire Size Ins. Contact Strip Form Loose Piece Tooling Part No.**

Range Dia. Finish Contact No. Contact No. Loose Piece Strip Form

AWG mm2Range Pin Socket Pin Socket Hand Tool Applicators

466326-□***

.080-.1001Gold 1-66359-6 1-66358-9 1-66361-4 1-66360-4 91519-13or

18-14 0.8-2.0 2.03-2.54 Tin 1-66359-9 2-66358-1 1-66361-6 1-66360-6 466923-2***

.110-.1502Gold 1-66597-0 1-66598-1 66602-9 1-66601-0 466958-1***

2.79-3.81 Tin 1-66597-1 1-66598-2 1-66602-0 1-66601-2 91521-13or

567364-□***

Socket

1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].

2Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.

To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly,

order SAHT Adapter Part No. 217201-1,Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and

Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).

**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.

*** Call Technical Support for Automatic Machine Applicator Part Numbers.

Note: All part numbers are RoHS compliant.

Voltage: 250 Volts AC/DC

600 Volts AC/DC, Series I, VDE tested and select loaded only

Base Current: Type III+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire

Enhanced High Current Type III+ contacts: 25 amperes,30˚C temperature rise with single contact on 14 AWG wire

Temperature: -55˚C to +105˚C

VDE 0627: XA/630/4KV/2 - Series I, VDE tested only

Type III+ Contacts (Note: 1 = 17 amperes)

Single Circuit ≅50% 100%

Shell Size Wire Size Wire Size Wire Size

30 AWG 14 AWG 30 AWG 14 AWG 30 AWG 14 AWG

11-4 .291 1 .212 .905 .140 .684

13-9 .278 .995 .175 .750 .134 .567

17-16 .270 .990 .146 .625 .127 .472

23-24 .281 .985 .138 .550 .120 .416

23-37 .275 .985 .131 .497 .114 .376

Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes)

Single Circuit ≅50% 100%

Shell Size 14 AWG 14 AWG 14 AWG

11-4 .880 .840 .640

13-9 .880 .640 .480

17-16 .880 .520 .400

23-24 .880 .520 .400

23-37 .880 .440 .320

Percent Connector Loading

Enhanced High Current Contacts & M Series Connectors:

(Note: 1 = 24 amperes)

Single Circuit ≅50% ≅100%

14 AWG 14 AWG 14 AWG

1 .292 .250

Enhanced High Current Contacts & Metrimate Connectors:

(Note: 1 = 24 amperes)

Single Circuit ≅50% ≅100%

14 AWG 14 AWG 14 AWG

1 .458 .375

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support

Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425

specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514

are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts

Signal Contacts (Continued)

Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡

Tooling Part No.**

Wire Size Ins. Tape Mounted Loose Piece Contact Tape Mounted Loose Piece

Range Dia. Contact No.2Contact No. Color Dies for Die Set for Hand

AWG mm2Range1Pin Socket Pin Socket Code AMP-TAPETRONIC 626 Pneumatic Tool

Machine 69875 Tool System

.035-.055 —

0.89-1.40 201611-4 201611-14201613-15Red/Red 91538-1*

.048-.065 ——

90230-17or 601967-1*

28-24 0.08-0.20 1.22-1.65 201334-14201332-15Red/Red 90249-2

.095-.110 —— — 601967-1*

2.41-2.79 202410-14202411-15Green

.040-.062 —91538-1*

1.02-1.57 201578-4 201578-14201580-15Yellow/Red or 58541-1*

24-20 0.2-0.6 .055-.088 90249-2 90230-17

or 601967-1*

1.40-2.16 201330-6 201328-9 201330-14201328-15Yellow/Red

18 0.9-0.9 No. Ins. —— 91539-1*

(Two) (Two) Support 202725-14202726-14Blue — 90231-27or 601967-1*

.080-.105 ———90136-1*

2.03-2.67 202507-14202508-15——or 601967-1*

18-16 0.8-1.4 200336-6 200333-8 200336-14200333-14Blue/Blue 90250-1 90231-2791539-1*

No Ins. —————58541-1*

Support ,6204219-15,6 Blue/Blue or 601967-1*

3212618-23—212618-13,6,† —Violet/Blue 90250-1 90231-2791539-1-

No Ins. 201570-2 201568-3 201568-15——58541-1*

14 2Support 201570-14Violet/Blue or 601967-1*

1Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].

2For AMP-TAPETRONIC Machine No. 69875, order contacts by Tape Mounted Contact No., plus packaging code “IM REEL” (5000 parts per reel).

3Grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves.

4Use turret TH502 (1-601967-6)with hand tool 601967-1.

5Use turret TH501 (1-601967-5)with hand tool 601967-1.

6Pin length is .630±.005 [16.002±.127]on these two pins.

7Die Set requires “C” Head Adapter Part No. 318161-1;Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without); and Power Unit

Part No. 189721-2 (hand actuated) or 189722-2 (foot actuated).

*Commercial PRO-CRIMPER II Hand Tool for field repair use only. Note: Die Set can be adapted for use with the 626 Pneumatic Tool System.

**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.

†Does not use Hand Tool 91539-1 or 601967-1.

‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability informa-

tion on page 8.

Insertion Tool Part No. 200893-2 (for insulation diameters .070 [1.78] or less).

Extraction Tool Part No. 305183.

Note: All part numbers are RoHS compliant.

Type II, Screw Machined,

Crimp

Material

Contact Body—Brass

Retention Spring—Stainless steel

Finish

Contact Body—.000030 [0.00076]

gold over .000050 [0.00127]

nickel. Gold thickness controlled

on socket O.D.

Retention Spring—Stainless steel

Related Product Data

Application Tooling—Pages 75-78

Socket

.795±.010

[20.19±0.25]

.472±.005

[11.99±0.13]

.062±.001

[1.57±0.03]Dia.

Spring

Socket Body

Pin Body

.107 Max. Dia.

[2.72]

1.087±.010

[27.61±0.25]

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support

Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425

specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514

are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts

Signal Contacts (Continued)

Material

Pin Body—Brass

Socket—Phosphor bronze

Contact Finish

A—Select gold flash over nickel

on entire contact, with additional

.000030 [0.00076] gold on

mating end

B—Duplex plated .000030

[0.00076] gold on mating end, tin

on termination end, with entire con-

tact nickel underplated

C—Gold flash over nickel on entire

contact

D—Duplex plated gold flash on

mating end, tin on termination end,

with entire contact nickel underplated

Insertion/Extraction Tool Part No.

91285-1

Instruction Sheet—408-9404

This tool includes interchangeable tips

to Insert/Extract:

Size 22, 28-22 AWG [0.08-0.03mm2]

Crimp Contacts

Size 20, 28-20 AWG [0.08-0.6mm2]

Crimp and Solder Cup Contacts

Size 20, Posted Contacts

Socket

Size 20 DF, Crimp, Snap-In

Contact Size—20

Pin Diameter—.040 [1.02]

*See Product Spec 108-40005

.085

[2.16] Dia. Max.

.085

[2.16] Dia. Max.

.390

[9.91]

.370

[9.34]

.555

[14.1]

.575

[14.61]

[.0400±.0015

[1.02±0.034]Dia.

Localized Gold Plate Area

.150

[3.81]

.055

[1.40] Min.

Contact Part Nos. Tooling** Color

Wire Ins. Contact

Pin Socket Code

Size Dia. Finish Strip Form Hand (Loose

Range Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator†† Tool Piece)

A 66507-3t66507-9t66505-3t66505-9t

.040 B 1658540-1t1658540-5t1658538-2t—466423-□†† tBlue

28-24 1.02 C 66507-4t1-66507-0t66505-4t1-66505-0tor 466901-1††t91503-1†tDot

AWG D1658540-5t1658540-2t1658538-3t1658538-1tor 1016015-1††t

[0.08-0.2 A 66682-2t66682-4t66683-2t66683-4t466758-2††t

mm2].060 B5066682-9t—1-5066683-0t—or 466963-1††t91549-1†tBlack

1.52 D5066682-6t—5066683-7t—or 567804-1††tDot

26-22 A 745254-2t745254-6t745253-2t745253-6t

AWG .050 B 1658544-2t1658544-1t1658543-2t1658543-1t466968-1††tYellow

[0.12-0.4 1.27 C 745254-3t745254-7t745253-3t745253-7tor 567036-□††t91525-1†tDot

mm2]D 1658544-3t— 1658543-3t—or 567849-1††t

24-20 A 66506-3t66506-9t66504-3t66504-9t466422-□††t

AWG .060 B1658539-1t1658539-3t1658537-3t1658537-4tor 466900-1††tRed

[0.2-0.6 1.52 C 66506-4t1-66506-0t66504-4t1-66504-0tor 567801-1††t91503-1†tDot

mm2]D1658539-2t1658539-4t1658537-1t1658537-2tor 1016002-1††t

†To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT)

Assembly, order SAHT Adapter Part No. (Call Technical Support at 800-522-6752),Adapter Holder Part No. 356304-1

(with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).

††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines,

contact Technical Support: 1-800-522-6752.

Note: Commercial PRO-CRIMPER II Maintenance and Repair Hand Tool for Wire Size 28-24 AWG [0.08-0.2mm2]

(Ins. Dia. Max. .040 [1.02]), and Wire Size 24-20 AWG [0.2-0.6mm2](Ins. Dia. Max. .060 [1.52])—Part No. 58448-2.

Note: Die Set Part No. 58448-3 can be adapted for use with the 626 Pneumatic Tool System.

**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric

Terminator on page 30.

Note: All part numbers are RoHS compliant except: tIndicates non-RoHS compliant.

With Insulation Support

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support

Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425

specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514

are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts

Signal Contacts (Continued)

Without Insulation Support

Socket

Color

Wire Contact Contact Part Nos. Tooling**

Code

Size Ins. Dia. Finish Pin Socket Strip Form Hand (Loose

Range Max. Code Strip Form Loose Piece Strip Form Loose Piece Applicator Tool Piece)

28-24

AWG .068 A 205310-2t— 205311-3t—

[0.08-0.2 1.73 C————

†† ——

mm2]

24-20

AWG .068 A 205202-2t— 205201-3t205201-5tRed

[0.2-0.6 1.73 C 205202-6t205202-7t205201-6t205201-7t

†† 91548-1tDot

mm2]

22-18 A 745229-2t745229-4t745230-2t745230-4t

AWG .068 B 1-745229-1t— 1-745230-1t1-745230-3tGreen

[0.4-0.8 1.73 C745229-5t745229-7t745230-5t745230-7t†† 91513-1tDot

mm2]D — — 745230-8t—

.085

[2.16] Dia. Max.

.390

[9.91]

.550

[14.0]

.100

[2.54]

Point of

Measurement

.530

[13.46]

.085

[2.16] Dia. Max.

.0400±.0015

[1.02±0.034]Dia.

.150

[3.81]

Localized Gold Plate Area

Size 20 DF, Crimp, Snap-In

(Continued)

††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines,

contact Technical Support: 1-800-522-6752.

Note: Wire insulation diameter is limited by the connector housing cavity and clearance for the

insertion/extraction tool.

**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric

Terminator on page 30.

Note: All part numbers are RoHS compliant except: tIndicates non-RoHS compliant.

1717

Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support

Revised 7-07 millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425

specified. Values in brackets Specifications subject to change. Canada: 1-905-475-6222 South America: 55-11-3611-1514

are metric equivalents. Mexico: 01-800-733-8926 www.tycoelectronics.com

AMP Precision Pin and Socket Contacts

Note: All part numbers are RoHS compliant.

Socket

Size 20 DF, Solder, Snap-In

Contact Size—20

*See Product Spec 108-40005

Material

Pin—Brass

Socket—Phosphor bronze

Contact Finish

Gold flash over nickel on entire contact,

with additional .000030 [0.00076] gold

on mating end

Contacts to be soldered to wire

before being inserted into housing.

18 AWG [0.8-0.9 mm2]Max. Wire

Strip Form Loose Piece

Contact No. Contact No.

Pin Socket Pin Socket

66570-2 66569-2 66570-3 66569-3

.085

[2.16] Dia. Max.

.390

[9.91]

.133

[3.38]

Max.

.560

[14.22] Ref.

.085

[2.16] Dia. Max.

.070

[1.78] Dia. Max.

.580

[14.73]

.0400±.0015

[1.02±0.034]Dia.

.155

[3.94]

Localized Gold Plate Area

Signal Contacts (Continued)