Copyright 2008, Wi2Wi Inc. Wi2Wi Inc. 2107 N First Street Ste 540, San Jose, CA 95131
USA Tel: +1 408 416 4000 FAX: +1 408 416 4201
www.wi2wi.com
Package Dimensions
- 9.5mm (L) x 9.5mm(W) x 1.4mm(H)
W2SW0001 - Specications
Package Type
- 81-pin LGA, 0.75 mm pitch
Power Ratings
- Supply Voltage : 3.3VDC, regulated to 1.5V
- Peak Current: 260 mA
(continuous transmit, 802.11g)
- IEEE Power Save Mode: 10 mA
- Deep Sleep Mode: 2mA
Temperature Range
- Operating: -20˚ C to + 75˚ C
- Storage: -40˚ C to + 85˚ C
- Humidity: 5% to 95%, Non-condensing
Data Rates
-CCK: 1,2,5.5, and 11Mb/s
-OFDM: 6,9,12,18,24,36,48,and 54 Mb/s
Host Interfaces
- SDIO 1 bit and 4 bit
- GSPI (slower data rate)
Transmit Power
- +15dBm typical for both 802.11 b and g
Security
- WEP,TKIP, WPA and WPA2, AES/CCMP per
802.11 i
Baseband Modulation
- 802.11g: OFDM
- 802.11b: DSSS/CCK
Receiver Sensitivity
- 54 Mb/s @ -74 dBm OFDM
- 6Mb/s @ -90 dBm OFDM
- 11Mb/s @ -88 dBm CCK
- 1Mb/s @ -90 dBm DSSS
Quality of Service
- 802.11 e EDCF
Host Processors/OS
With Driver Support
- Marvell PXA Family - most OSs
- Freescale i.MX21 and 31 - Linux OS, SDIO
- Samsung SC2443, 2412 - Linux (SDIO), WinCE
WinMobile (GSPI)
- X86 - Vista, XP, and Linux
- Please contact your Wi2Wi sales rep if your
processor is not listed!
Features
- Small form factor SiP solution,
9.5mm x 9.5mm x1.4mm, 81 Pin LGA, .75mm pitch
- Low power consumption and power save mode
- Full support for 802.11 e(QOS) and 802.11i (Security)
- Integrated RF-friendly LDO for single rail operation
- Integrated PA, EEPROM, Balun, and clocking
- Optimized front-end design for receive sensitivity
- Full driver support for popular OSs for the Marvell PXA
processor family, Linux support for many other ARM-9 based processors
- Includes both an SDIO and a GSPI interface
- RoHS compliant
- 7 GPIOS
Copyright 2008, Wi2Wi Inc. Wi2Wi Inc. 2107 N First Street Ste 540, San Jose, CA 95131
USA Tel: +1 408 416 4000 FAX: +1 408 416 4201
www.wi2wi.com
The W2SW0001 is a complete 802.11 b/g radio solution based
on the industry standard Marvell 8686 architecture. Designed for handheld
or portable warehousing/logistics, medical, and industrial applications, it is a
complete WiFi solution that includes an LDO for single rail operation, all crystals,
all filtering, local memory for MAC address storage, and diagnostics capability.
A full array of certifications have been performed on this device, making the
certification process for the final system’s design much easier and less costly.
Full driver support is available for most OS’s for the Marvell PXA family processors,
as well as many other ARM-9 based processors using a Linux OS.
Ordering Information
W2SW0001-TR -WiFi SiP, Tape and Reel
W2SW0001-T - WiFi SiP, Tray
W2SW0001-SAM - WiFi SiP Sample Pack
W2SW0001-DEV - WiFi SiP Evaluation
Kit
(Note , please soecify GSPI or SDIO
interface will be used)
Applications
- Warehousing and logistics handhelds
- Automotive aftermarket
- Medical equipment
- Industrial handhelds
- M2M applications
- POS terminals
- Internet-enabled consumer devices
- VoFi and other smartphones
- WiFi enabled security cameras
W2SW0001 - 802.11 b/g System-in-Package
