P TS Se r ie s: P TS 120 6, P TS 0 8 0 5, P TS 0 6 0 3 Key Benefits * Wide temperature range (-55 C up to +155 C) * Linear temperature characteristic (TC = +3850 ppm/K) * Short reaction time (t0.9 5 s in air) *Tolerance classes B and 2B * Standard ohmic values: 100 , 500 and 1 k *Outstanding stability of temperature characteristic (<0.04%) * Product tested in accordance with IEC 60751 and IEC 60068 APPLICATIONS * Automotive * Industrial *Telecommunications * White goods * Medical * Process and automation technologies *HVAC w w w. v i s h a y. c o m Datasheet is available on our web site at www.vishay.com for PTS Series - http://www.vishay.com/doc?28762 Product Sheet Platinum SMD Flat Chip Temperature Sensor r e sis t iv e p r o d u c t s Sensors flowing air (v = 3.0 m/s) flowing water (v = 0.4 m/s) t0.5 d 0.3 s t0.9 d 0.4 s t0.5 d 0.2 s t0.9 d 0.3 s t0.5 d 1.5 s t0.9 d 3.0 s t0.5 d 0.1 s t0.9 d 0.2 s t0.5 d 1.0 s t0.9 d 2.0 s For technical questions, contact nlr.europe@vishay.com Vishay Beyschlag WT T2 TEMPERATURE IN C (3) SIZE CODE TYPE PW PACKAGING (3) -B TOLERANCE CLASS RESISTANCE VALUE 100R 0.4 + 0.1/- 0.2 147.95 > 75125 % of W 150 0.3 + 0.15/- 0.2 786.58 0.4 + 0.1/- 0.2 739.76 692.50 1.9 1573.15 1479.51 9.2 1385.00 596.98 1193.95 Platinum SMD Flat Chip PTS series temperature tolerance (Class B) PTS series resistance tolerance (Class B) 157.33 138.51 1097.30 0.4 - 0.8 x 2002/95/EC Restriction of the - 0.6 Substances1.00Directive (RoHS) - 0.4 use of Hazardous x 2000/53/EC Annex II to End of Vehicle Life Directive R () /R -00.2 1.20 (ELV II) 0 x 2000/53/EC1.40End of Vehicle life Directive (ELV) 0.2 This includes full compatibility with the following directives: 0.8 1.0 0 2.0 2.5 P1 P5 - 40 - 20 0 60 Temperature [C] 40 80 Tolerance Class B 20 PTS series temperature tolerance (Class 2B) PTS series resistance tolerance (Class 2B) www.vishay.com 2 - 60 1.0 0.6 120 140 160 - 1.0 - 1.5 - 2.0 - 1.0 - 1.5 - 2.0 - 0.5 0 0.5 1.0 1.5 2.0 2.5 - 20 0 20 40 [C] 60 Temperature 80 100 - 20 0 20 40 60 80 100 120 140 160 - 1.0 - 1.5 - 2.0 - 2.5 - 1.0 - 1.5 - 2.0 - 2.5 0.85 1.10 2.10 1.85 1.60 1.10 0.60 Document Numbe Revision: 10- www.vishay.co 5 VMN-PT9201-0801 Document Number: 28762 Revision: 10-Sep-07 For technical questions, contact: nlr.europe@vishay.com Tolerance Class 2B Temperature [C] - 0.5 - 0.5 0 1.0 1.5 2.0 2.5 160 - 1.2 - 1.0 0.5 - 40 140 160 - 0.8 - 0.6 - 0.4 - 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 0 - 60 Lead (Pb)-free Identification on the Package Label e3 For technical questions, contact: nlr.europe@vishay.com PTS series temperature tolerance (Class 2B) PTS series resistance tolerance (Class 2B) 120 140 1.05 0.93 0.5 1.0 1.5 2.0 www.vishay.com2.5 4 Revision: 10-Sep-07 www.vishay.com - 1.2 3 REEL REEL 0.8 REEL BOX nlr.europe@vishay.com For technical questions, contact: Document Number: 28762 100 For technical questions, contact: nlr.europe@vishay.com PW 5000 20 000 1000 PU - 40 Tolerance Class The Pt-sensors are tested in accordance withB IEC Temperature [C] 60751 Nominal Resistance Value and IEC 60068 series. APPROVALS- 60 Vishay Beyschlag The Pt-sensors are suitable for processing on automatic 0.4 114 mm 100 PU BOX SMD assembly systems. They are suitable for automatic 0.2 180 mm/7" 1000 P1 REEL soldering using wave, reflow or vapour phase. The 180 mm/7" 5000 P5 REEL 0 encapsulation is resistant to all cleaning solvents 330 mm/13" 20 000 PW REEL - 0.2 commonly 114used in the 100 electronics industry, including mm PU BOX alcohols, esters are - 0.4 180 mm/7" and aqueous 1000 solutions. The P1 Pt-sensors REEL RoHS compliant, the pure 5000 tin plating provides compatibility 180 mm/7" P5 REEL - 0.6 330 mm/13" 20 000 PW REEL with lead (Pb)-free and lead-containing soldering - 0.8 processes. The immunity of the plating against tin whisker - 1.0 growth has been proven under extensive testing. 330 mm/13" 180 mm/7" PTS series temperature tolerance (Class B) PTS (Class B) 114series mm resistance tolerance100 ASSEMBLY 180 mm/7" Document Number: 28762 - 1.2 Revision: 10-Sep-07 - 1.0 - 0.8 - 0.6 PTS 1206 - 0.4 - 0.2 PTS 0805 0.2 0.4 0.6 PTS 0603 MODEL Platinum SMD Flat Chip Temperature Sensor Solderability is specified for 2 years after production or 1.2 re-qualification. The permitted storage time is 20 years. BOX/REEL DIAMETER PIECES CODE STORAGE Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION The Part Number is shown to facilitate the introduction of a unified part numbering system Please refer to table PACKAGING We recommend that the Production Description is used to minimize the possibility of errors in order handling PACKAGING 1.2 (4) (2) (2) (1) CLASS 2 Tolerance in Vishay Beyschlag 1.35 0.80 0.68 0.55 0.30 0.43 0.55 Tolerance in K Series 0.43- Pt-Sensors 0.85 All products comply with the CEFIC-EECA-EICTA list of legal PTS Series 0.6 on hazardous substances. restrictions 1.60 0.8 1.0 1.80 128.99 644.90 0.4 + 0.1/- 0.2 Temperature 0.4 + 0.1/-Sensor 0.2 1289.80 4.6 1.2 0.3119.40 + 0.15/- 0.2 100 548.65 1000 > 7550% of W 109.73 500 > 7575% of W 25 MASS (mg) PTS 901.90 803.07 T2 (mm) 401.54 100 T1 (mm) 90.19 - 25 WT 0 (mm) 450.95 Nominal Resistance in : R0 = 500 : Nominal Resistance in : R0 = 100 : CLASS B '-2B (0.6 + 0.010 x_-_ Class 2B: R0 = 1000 : '-B (0.3 + 0.005 x_-_ Class B: The tolerances values of the PTS series are classified following equations: Nominal Resistance in : NOMINAL RESISTANCE VALUE R(-): resistance as a function of temperature R0: nominal resistance value at 0 C -: temperature in C R(-) = R0 x (1 + A x - + Bx -2) and for the temperature range of 0 C up to + 155 C: A = 3.9083 x 10-3 C-1 B = - 5.775 x 10-7 C-2 C = - 4.183 x 10-12 C-4 According to IEC 60751 the values of the coefficients The result of the determined production PUis verified by an x 2002/96/EC Waste Electrical and Electronic Equipment PTS = Platinum 0603 B = Class B 100R = 100 : - 1.0 0.80 Temperature 0805 2B = Class performed 2B P1 100 % of 500Rthe = 500 : extensive testing procedure on Directive (WEEE) Sensor SMD 1206 P5 1K = 1000 : - 1.2 PW individual sensors. Only accepted products are laid directly - 60 - 40 - 20 0 20 40 60 80 100 120 into the paper tape in accordance with IEC 60286-3. PTS Series - Pt-Sensors 0.60 Notes: 0603 QUALITY PTS PRODUCT DESCRIPTION (4): PTS 0603-B PW 100R T S 0 6 0 3 0 1 B 1 0 0 R P W 0 Production is strictly controlled and follows an extensive set0 of instructions for reproducibility. A SPECIAL established TOLERANCE RESISTANCE TYPE SIZE CODE SPECIAL PACKAGING CLASS VALUE homogeneousCHARACTER film of platinum is deposited on a high grade 3 digits 4 digits 1 digit 2 digits 4 digits 2 digits 2 digits ceramic body (96 % AI2O3). The sensor-elements are PTS = Platinum 0603 0 = neutral 1B = Class B 100R = 100 : PU 00 = standard coating designed forP1 electrical, Temperature covered 0805 by a protective 2B = Class 2B 500R = 500 : Sensor SMD 1206 1K00 = 1000 : P5 mechanical and climatic protection. The terminations receive PW a final pure tin on nickel plating. (1) Platinum 0.55 SMD 0.1 Flat Chip 3.2 + 0.1/- 0.2Vishay 1.6 0.15 Beyschlag Temperature Sensor PTS 1206 0.85 0.1 2.0 Series 0.1 1.25 0.15 PTS - Pt-Sensors 1.55 0.05 W (mm) 0.45 + 0.1/- 0.05 L (mm) 0.45 + 0.1/- 0.05 H (mm) PTS 0805 PRODUCTION PART NUMBER : PTS060301B100RPW000 P L PTS 0603 TYPE PART NUMBER AND PRODUCT DESCRIPTION (2) H W T1 R(-) = R0 x (1 + A x - + B x -2 + C x (- - 100 C) x -3) for the temperature range of - 55 C up to 0 C: The temperature resistance relationships of the PTS series follow different equations: FUNCTIONAL PERFORMANCE Platinum SMD Flat Chip Temperature Sensor Vishay Beyschlag DIMENSIONS - PTS sensor types, mass and relevant physical- 50dimensions 80.31 DIMENSIONS 1.5 Document Number: 28762 For technical questions, contact: nlr.europe@vishay.com www.vishay.com Revision: 10-Sep-07 1 1.0 NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by0.5this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving,0 or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. - 0.5 t0.9 d 5.0 s t0.5 d 2.0 s d 0.7 K/mW 0.1 mA to 0.25 mA 0.1 mA to 0.25 mA d 0.8 K/mW - 0.1 mA to 0.25 mA 0.1 mA to 1.0 mA 100 :, 500 :, 1000 : PTS 1206 d 0.9 K/mW - 1000 : still air (v = 0 m/s) - 500 : Note: (1) Valid for sensor element only. Thermal response time (1) Self-heating (1) Measurement current Imeas. (DC) 0.1 mA to 1.0 mA > 10 M: Insulation resistance 100 : < 0.04 % - 55 C to + 155 C Temperature range Long term stability 'R0/R0; R0 change after 1000 h at + 155 C B, 2B 0.1 mA to 0.25 mA 100 :, 500 : 100 : + 3850 ppm/K PTS 0805 PTS 0603 x Industrial electronics x Aviation electronics x Automotive electronics Temperature measurement in APPLICATIONS Tolerance classes Temperature coefficient (0 C ... + 100 C) Resistance values R0 at 0 C DESCRIPTION TECHNICAL SPECIFICATIONS PTS SMD Flat Chip Temperature sensors are the perfect choice for temperature control of electronics operating under varying environmental conditions. The highly controlled platinum thin film manufacturing process guarantees an outstanding stability of temperature characteristics which ensures reliable operation even under harsh conditions. Typical applications include automotive, aviation and industrial electronics. x Green product, supports lead (Pb)-free soldering x Standard SMD sizes x Outstanding stability of temperature characteristic x Short reaction times down to t0.9 d 2 s (in air) x Advanced thin film technology x Specification according to IEC 60751 FEATURES Temperature tolerance [C] Temperature tolerance [C] Resistance tolerance [%] Resistance tolerance [%] Platinum SMD Flat Chip Temperature Sensor Revision 10-Sep-07 PTS Series - Pt-Sensors Platinum SMD Flat Chip Vishay Beyschlag PTS Series - Pt-Sensors Platinum SMD Flat Chip Vishay Beyschlag Temperature Sensor Temperature Sensor PTS Series - Pt-Sensors PTS Series - Pt-Sensors Temperature tolerance [C] Temperature tolerance [C] Resistance tolerance [%] Resistance tolerance [%]