https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page1/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE, consisting of DIN rail-mountable basic terminal block with screw connection and plug-in
miniature solid-state relay, input: 24 V DC, output: 3 - 48 V DC/100 mA, UL/cUL: approved for use in Ex Zone
Class I, Div. 2
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356687379
Weight per Piece (excluding packing) 38.000 g
Custom tariff number 85364190
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 6.2 mm
Height 80 mm
Depth 94 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Input data
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page2/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Technical data
Input data
Nominal input voltage UN24 V DC
Input voltage range in reference to UN0.8 ... 1.2
Input voltage range 19.2 V DC ... 28.8 V DC
Switching threshold "0" signal in reference to UN≤ 0.4
Switching threshold "1" signal in reference to UN≥ 0.8
Typical input current at UN8.5 mA
Typical response time 20 µs (at UN)
Typical turn-off time 300 µs (at UN)
Operating voltage display Yellow LED
Type of protection Reverse polarity protection
Free-wheeling diode
Protective circuit/component Polarity protection diode
Damping diode
Transmission frequency 300 Hz
Power dissipation for nominal condition 0.2 W
Output data
Output voltage range 3 V DC ... 48 V DC
Limiting continuous current 100 mA
Voltage drop at max. limiting continuous current ≤ 1 V
Output circuit 2-wire, floating
Type of protection Reverse polarity protection
Surge protection
Protective circuit/component Polarity protection diode
General
Test voltage input/output 2.5 kV (50 Hz, 1 min.)
Mounting position any
Assembly instructions In rows with zero spacing
Operating mode 100% operating factor
Flammability rating according to UL 94 V0
UL, USA Class I, Zone 2, AEx nA nC IIC T6
UL, USA/Canada Class I, Div. 2, Groups A, B, C, D
UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X
Connection data
Connection name Input side
Connection method Screw connection
Stripping length 8 mm
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page3/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Technical data
Connection data
Screw thread M 3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Connection data 2
Connection name Output side
Connection method Screw connection
Stripping length 8 mm
Screw thread M 3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Standards and Regulations
Designation Standards/regulations
Standards/regulations IEC60664
EN 50178
Insulation Basic insulation
Degree of pollution 2
Overvoltage category III
Flammability rating according to UL 94 V0
Conformance CE-compliant
UL, USA Class I, Zone 2, AEx nA nC IIC T6
UL, USA/Canada Class I, Div. 2, Groups A, B, C, D
UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page4/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Circuit diagram
A2
A1
13+
14
Classifications
eCl@ss
eCl@ss 5.0 27371001
eCl@ss 5.1 27371001
eCl@ss 6.0 27371604
eCl@ss 7.0 27371604
eCl@ss 8.0 27371604
eCl@ss 9.0 27371604
ETIM
ETIM 2.0 EC001504
ETIM 3.0 EC001504
ETIM 4.0 EC001504
ETIM 5.0 EC001504
ETIM 6.0 EC001504
UNSPSC
UNSPSC 6.01 30211916
UNSPSC 7.0901 39121542
UNSPSC 11 39121542
UNSPSC 12.01 39121542
UNSPSC 13.2 39122326
Approvals
Approvals
Approvals
EAC
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page5/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Approvals
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
EAC RU C-
DE.A*30.B.01082
Accessories
Accessories
Bridge
Continuous plug-in bridge-FBST 500-PLC RD-2966786
Continuous plug-in bridge, length: 500 mm, color: red
Continuous plug-in bridge-FBST 500-PLC BU-2966692
Continuous plug-in bridge, length: 500 mm, color: blue
Continuous plug-in bridge-FBST 500-PLC GY-2966838
Continuous plug-in bridge, length: 500 mm, color: gray
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page6/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
Single plug-in bridge-FBST 6-PLC RD-2966236
Single plug-in bridge, length: 6 mm, number of positions: 2, color: red
Single plug-in bridge-FBST 6-PLC BU-2966812
Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue
Single plug-in bridge-FBST 6-PLC GY-2966825
Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray
Single plug-in bridge-FBST 8-PLC GY-2967688
Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray
Single plug-in bridge-FBST 14-PLC BK-2967691
Single plug-in bridge, length: 14 mm, number of positions: 2, color: black
DIN rail
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page7/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
DIN rail, unperforated-NS 35/ 7,5 V2A UNPERF 2000MM-0801377
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Stainless steel V2A,
uncoated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 V2A UNPERF 2000MM-0801377
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Stainless steel V2A,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page8/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page9/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page10/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
Labeled terminal marker
Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page11/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
Partition plate
Separating plate-PLC-ATP BK-2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Separating plate-PLC-ATP BK-2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Terminal marking
Zack marker strip-ZB 6/WH-100:UNBEDRUCKT-5060935
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip-ZB 6/WH-100:UNBEDRUCKT-5060935
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
https://www.phoenixcontact.com/us/products/5603261
05/21/2019Page12/12
Optocoupler-PLC-OSC- 24DC/ 48DC/100/C1D2-5603261
Accessories
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Marker for terminal blocks-UC-TM 6-0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Marker for terminal blocks-UCT-TM 6-0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm
Spare parts
Miniature solid-state relay-OPT-24DC/ 48DC/100-2966618
Plug-in miniature solid-state relay, input solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com