857193
725.5 MHz SAW filter
Data Sheet: Rev b 08-20-2013
- 1 of 6 -
Disclaimer: Subject to change without notice
© 2013 TriQuint
Applications
• General purpose wireless
• Wireless infrastructure
• Base Station Applications
SMP-12, 3.00 x 3.00 x 1.22 mm
Pin Configuration – Single Ended
EE
E
nded
./Bal
-
B
Pin No. Label
2 Input
5 Output
1.3,4,6 Ground
Functional Block Diagram
Product Features
• Usable bandwidth of 45 MHz
• For wideband applications
• Low Loss
• Single-ended operation
• Matching required for operation at 50Ω
• Small Size: 3.00 x 3.00 x 1.22 mm
• Ceramic Surface Mount Package (SMP)
• Hermetically sealed
• RoHS compliant (2002/95/EC), Pb-free
General Description
857193 is a general purpose Uplink filter for Band 28.
This filte
r was specifically designed in a 3x3mm
hermetic package for base station applications and is
part of our wide portfolio of RF filters in the same
package.
Lo
w insertion loss, coupled with high attenuation and
excellent power handling, makes this filter a natural
choice for our customers’ Uplink RF filtering needs.
Ordering Information
Part No. Description
857193 Product description
857193-EVB Evaluation board description
Standard T/R size = 5000 units/reel
4
2
3
16
5
Input Output
Gnd
Gnd Gnd
Gnd
Pb
857193
725.5 MHz SAW filter
Data Sheet: Rev b 08-20-2013
- 2 of 6 -
Disclaimer: Subject to change without notice
© 2013 TriQuint
Parameter Rating
Storage Temperature -40 to +85°C
RF Input Power
(
1
)
+22 dBm
1. Input Power with applied CW signal at +55°C for 25 hours
Absolute Maximum Ratings
Electrical Specifications
(1)
Specified Temperature Range:
(2)
-30°C to +100°C
Parameter
(
3
)
Conditions Min Typ
(4)
Max Units
Center Frequency - 725.5 - MHz
Maximum Insertion Loss 703 – 748 MHz - 2.3 4.0 dB
Amplitude Variation
(5)
703 – 748 MHz
Any 5 MHz span within 703 -748 MHz
-
0.8
0.4
1.0
0.6
dB p-p
dB p-p
Temperature Drift
(6)
703 – 748 MHz - 0.25 0.3 dB
Phase Ripple 703 – 748 MHz - 21 35 deg. p-p
EVM
(7)
703 – 748 MHz
Any 3.84 MHz span within 703 – 748 MHz
- 1.6 2.0 %
IIP3
(
8
)
Tones 5 MHz separated, power >5 dBm per tone
44 50 - dBm
Absolute Delay 703 – 748 MHz - 17 30 ns
Group Delay Variation 703 – 748 MHz - 20 30 ns p-p
Relative Attenuation
(9)
10 – 100 MHz
430 – 480 MHz
480 – 648 MHz
773 – 830 MHz
936 – 971 MHz
1615 – 1660 MHz
1660 – 2690 MHz
3510
–
3800
MHz
30
30
20
20
20
45
20
20
60
36
25
28
30
60
55
50
-
-
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
dB
dB
Input/Output VSWR
(
10
)
703 – 748 MHz - 1.7 2.0:1 -
Load/Source Impedance
(11)
single-ended - 50 - Ohms
Notes:
1. All specifications are based on the TriQuint schematic shown on page 3
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance
over temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
4. Typical values are based on average measurements at room temperature
5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency
points
6. Temperature Drift specification is defined on Page 3 and is guaranteed by design and will not be measured in production.
7. Measured with a RRC filtered QPSK modulated signal
8. To be measured only during engineering development
9. Relative to the maximum insertion loss
10. 2% tolerance on the matching component values would be needed to achieve this specification
11. This is the optimum impedance in order to achieve the performance shown
857193
725.5 MHz SAW filter
Data Sheet: Rev b 08-20-2013
- 3 of 6 -
Disclaimer: Subject to change without notice
© 2013 TriQuint
Temperature Drift Specification
TempDrift
= │ max(T
− T
)−min(T
−T
)
2│
Temp
Drift
=
│
max
(
T
−
T
!
)
−
min
(
T
−
T
!
)
2
│
Temperature Drift Equations:
Temperature Drift Terms Defined:
T
ambient
- Transmission power in dB measured at +25°C.
T
hot
- Transmission power in dB measured at +100°C.
T
!
- Transmission power in dB measured at -30°C.
Temperature Drift - Greater of
Temp
Drift
vs
Temp
Drift
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the TriQuint
evaluation board for this product. Some modification may be necessary
to suit end user assembly materials and processes.
Bill of Material – 857193-EVB
Reference Des. Value Description Manuf. Part Number
U1 N/A 725.5 MHz SAW filter TriQuint 857193
L1, L2 16nH 0402 chip, series, wire wound, ±3% Murata LQW15AN16NH00
C1 3.6 pF 0402 chip, ceramic, GRM, ±2% Murata GRM1555C1H3R6GZ01
C2 0.4 pF 0402 chip, ceramic, GRM, ±10% Murata GRM1555C1HR40KZ01
SMA N/A SMA connector
Radiall USA
9602-1111-018
PCB N/A 3-layer Multiple 960700
857193-EVB Evaluation Board
Notes:
1. Impedance matching required.
2. PCB: .500 x.500 x .063; Construction (5 layer stack-up):
½ oz Cu Top Layer; Dielectric: Taconic TLY-5A (.0075); ½ oz Cu Middle Layer, FR4; ½ oz Cu Bottom Layer; total
thickness (0.063) (dimensions are in inches).
Contact TriQuint for Gerber files.
.96
3.20 SQ
1.27
.38
.81
1.70
960700
XX
JJJY M
L1 L2
C1 C2
1,3,4,6
50Ω
ΩΩ
Ω
2 5
50Ω
ΩΩ
Ω
16nH
0.4pF
16nH
3.6pF
857193
725.5 MHz SAW filter
Data Sheet: Rev b 08-20-2013
- 4 of 6 -
Disclaimer: Subject to change without notice
© 2013 TriQuint
Performance Plots - 857193-EVB
Test conditions unless otherwise noted:
Temp= +25°C
857193
725.5 MHz SAW filter
Data Sheet: Rev b 08-20-2013
- 5 of 6 -
Disclaimer: Subject to change without notice
© 2013 TriQuint
Package Information, Marking and Dimensions
Package Style: SMP-12A
Dimensions: 3.00 x 3.00 x 1.22 mm
Body: Al
2
O
3
ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0µm, over a 2-6µm Ni plating
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
The date code consists of day of the current year (Julian,
3 digits), Y = last digit of the year, and M = manu
facturing site
code
Notes:
1. All dimensions shown are typical in millimeters
2. An asterisk (*) in front of the marking code indicates
prototype.
Tape and Reel information
Standard T/R size = 5000 units/reel. All dimensions are in millimeters
0.69
1.22 NOM.
1.32 MAX.
0.75
0.60
1.50
0.75
3.00
3.00
KK
code
Marking
JJJY M
logo
ID dot
TriQuint
Ø102 Ø20.2
Ø13.0 2.0 Direction of travel
Ø330
12.8
2.7
3.25
Section A-A
1.75
Ø1.5
4.0 A
12.0
5.5
Ø1.5
4.0
2.0
3.25
1.4
0.21
A
logo
TriQuint
ID dot
857193
725.5 MHz SAW filter
Data Sheet: Rev b 08-20-2013
- 6 of 6 -
Disclaimer: Subject to change without notice
© 2013 TriQuint
Product Compliance Information
ESD Sensitivity Ratings
Caution! ESD-Sensitive Device
ESD Rating: Class 1B
Value:
Passes ≥ 650 V to < 700 V
Test: Electrostatic Discharge Sensitivity Testing,
Human Body Model (HBM) - component level
Standard: ESDA/JEDEC JS-001-2012
ESD Rating: Class B
Value:
Passes ≥ 300 V to350 V
Test: Machine Model (MM)
Standard: JEDEC Standard JESD22-A115
Solderability
Compatible with both lead-
free (260°C maximum
reflow temperature) and tin/lead (245°C maximum
reflow temperature) soldering processes.
Refer to Soldering Profile for recommended guidelines.
RoHs Compliance
This part is
compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain
Hazardous Substances in E
lectrical and Electronic
Equipment).
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C
15
H
12
Br
4
0
2
) Free
• PFOS Free
• SVHC Free
MSL Rating
Not applicable. Hermetic package.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and
information about TriQuint:
Web: www.triquint.com Tel: +1.407.886.8860
Email: info-sales@tqs.com Fax: +1.407.886.7061
For technical questions and application information: Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable.
TriQuint makes no warranties regarding the information
contained herein.
TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no res
ponsibility or liability whatsoever for the use of the information contained herein.
The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated
with such information is entirely with the user.
All i
nformation contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information do
es not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe
personal injury or death.
