Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181221
(1/4)
cmf_automotive_signal_act45l_en.fm
EMC Components
Theproductsinthiscatalogisnotrecommendedtoanewdesign
Common mode filters
Automotive signal line (for infotainment)
ACT series
ACT45L type
FEATURES
When mounting, the terminal and winding tape splicing part do not fuse.
ACT45L for Ethernet, which uses our unique technology, is a product that can realize higher-level Scd21 mode conversion characteris-
tics while maintaining a high L-value of 200µH.
Operating temperature range: –40 to +105°C
Compliant with AEC-Q200
APPLICATION
Ethernet system.
Application guides: Car Infotainment
PART NUMBER CONSTRUCTION
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
＊Equivalent measurement equipment may be used.
ACT45L - 201 - 2P - TL 000
Series • type name Inductance(typ.) Number of lines Packaging style Internal code
(µH)
Common mode
inductance
[100kHz]
DC resistance Rated current Insulation
resistance
Rated voltage Part No.
(µH)+60/–20µH ()max. (mA)max. (M)min. (V)max.
200 4.5 100 10 50 ACT45L-201-2P-TL000
Measurement item Product No. Manufacturer
Common mode inductance 4294A Keysight Technologies
DC resistance 4338A Keysight Technologies
Insulation resistance 4339A Keysight Technologies
AEC-Q200
REACH
SVHC-Free
Lead
Free
RoHS
Pb
Halogen
Free
Br
Cl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181221
(2/4)
cmf_automotive_signal_act45l_en.fm
EMC Components
Theproductsinthiscatalogisnotrecommendedtoanewdesign
ACT45L type
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
Measurement equipment
＊Equivalent measurement equipment may be used.
Product No. Manufacturer
4294A Keysight Technologies
1 10 100 1000
100000
10000
1000
1
10
100
Frequency (MHz)
Impedance (Ω)
201 Common mode
201 Differential mode
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181221
(3/4)
cmf_automotive_signal_act45l_en.fm
EMC Components
Theproductsinthiscatalogisnotrecommendedtoanewdesign
ACT45L type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
CIRCUIT DIAGRAM
RECOMMENDED REFLOW PROFILE
PACKAGING STYLE
REEL DIMENSIONS
TAPE DIMENSIONS
PACKAGE QUANTITY
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
The storage temperature range is for after the assembly.
Dimensions in mm
4.5±0.2
3.2±0.2
1
2
4
3
2.8±0.15
(0.65)(0.45)
(1.4)
Marking
5.5
3.9
2.1
0.7
1
2
4
3
• No polarity
Natural
cooling
5s
60 to 120s
Preheating
40s max.
Soldering
230
°C
230
°C
245°C
180
°C
150
°C
Time
Peak
Temperature
Ty p e A B K
ACT45L 3.6±0.1 4.9±0.1 3.05±0.1
Package quantity 2,500 pcs/reel
Operating
temperature range
Storage
temperature range
Individual
weight
–40 to +105 °C –40 to +105 °C 0.2 g
ø13.0±0.2
ø21.0±0.8
ø100±1
2 typ.2.0±0.5
ø330±2
Dimensions in mm
1.0
17.5±1
13.5±0.5
B
1.75±0.1
12.0±0.2
4.0±0.12.0±0.05
8.0±0.1
AK
5.5±0.05
1.55±0.05
Dimensions in mm
Sprocket
hole
Cavity
0.3±0.05
Blank Products Blank
160min. 400 to 500
Drawing direction
Start End
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20181221
(4/4)
cmf_automotive_signal_act45l_en.fm
EMC Components
Theproductsinthiscatalogisnotrecommendedtoanewdesign
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment  
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
REMINDERS