DISCRETE SEMICONDUCTORS DATA SHEET ook, halfpage M3D239 KTY81-2 series Silicon temperature sensors Product specification Supersedes data of 1998 Mar 26 2000 Aug 25 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series DESCRIPTION PINNING The temperature sensors in the KTY81-2 series have a positive temperature coefficient of resistance and are suitable for use in measurement and control systems. The sensors are encapsulated in the SOD70 leaded plastic package. PIN DESCRIPTION 1 electrical contact 2 electrical contact 3 not to be connected to a potential Tolerances of 0.5% or other special selections are available on request. MARKING TYPE NUMBER CODE KTY81-210 210 KTY81-220 220 KTY81-221 221 KTY81-222 222 KTY81-250 250 KTY81-251 251 KTY81-252 252 1 handbook, halfpage 3 2 MBH739 Fig.1 Simplified outline (SOD70). QUICK REFERENCE DATA SYMBOL R25 Tamb 2000 Aug 25 PARAMETER sensor resistance CONDITIONS MIN. MAX. UNIT Tamb = 25 C; Icont = 1 mA KTY81-210 1980 2020 KTY81-220 1960 2040 KTY81-221 1960 2000 KTY81-222 2000 2040 KTY81-250 1900 2100 KTY81-251 1900 2000 KTY81-252 2000 2100 -55 +150 C ambient operating temperature 2 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL Icont Tamb PARAMETER continuous sensor current CONDITIONS MIN. MAX. UNIT in free air; Tamb = 25 C - 10 mA in free air; Tamb = 150 C - 2 mA -55 +150 C ambient operating temperature CHARACTERISTICS Tamb = 25 C, in liquid, unless otherwise specified. SYMBOL R25 PARAMETER sensor resistance CONDITIONS MIN. TYP. MAX. UNIT Icont = 1 mA KTY81-210 1980 - 2020 KTY81-220 1960 - 2040 KTY81-221 1960 - 2000 KTY81-222 2000 - 2040 KTY81-250 1900 - 2100 KTY81-251 1900 - 2000 KTY81-252 2000 - 2100 - 0.79 - %/K TC temperature coefficient R100/R25 resistance ratio Tamb = 100 C and 25 C 1.676 1.696 1.716 R-55/R25 resistance ratio Tamb = -55 C and 25 C 0.480 0.490 0.500 thermal time constant; note 1 in still air - 30 - s in still liquid; note 2 - 5 - s in flowing liquid; note 2 - 3 - s -55 - +150 C rated temperature range Notes 1. The thermal time constant is the time taken for the sensor to reach 63.2% of the total temperature difference. For example, if a sensor with a temperature of 25 C is moved to an environment with an ambient temperature of 100 C, the time for the sensor to reach a temperature of 72.4 C is the thermal time constant. 2. Inert liquid, e.g. FC43 manufactured by the 3M company. 2000 Aug 25 3 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series Table 1 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-210 and KTY81-220 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-210 RESISTANCE () KTY81-220 MIN. TYP. MAX. TEMP. ERROR (K) (%/K) RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) -55 -67 0.99 951 980 1009 3.02 941 980 1019 4.02 -50 -58 0.98 1000 1030 1059 2.92 990 1030 1070 3.94 -40 -40 0.96 1105 1135 1165 2.74 1094 1135 1176 3.78 -30 -22 0.93 1218 1247 1277 2.55 1205 1247 1289 3.62 -20 -4 0.91 1338 1367 1396 2.35 1325 1367 1410 3.45 -10 14 0.88 1467 1495 1523 2.14 1452 1495 1538 3.27 0 32 0.85 1603 1630 1656 1.91 1587 1630 1673 3.08 10 50 0.83 1748 1772 1797 1.67 1730 1772 1814 2.88 20 68 0.80 1901 1922 1944 1.41 1881 1922 1963 2.66 25 77 0.79 1980 2000 2020 1.27 1960 2000 2040 2.54 30 86 0.78 2057 2080 2102 1.39 2036 2080 2123 2.68 40 104 0.75 2217 2245 2272 1.64 2194 2245 2295 2.97 50 122 0.73 2383 2417 2451 1.91 2359 2417 2475 3.28 60 140 0.71 2557 2597 2637 2.19 2531 2597 2663 3.61 70 158 0.69 2737 2785 2832 2.49 2709 2785 2860 3.94 80 176 0.67 2924 2980 3035 2.8 2894 2980 3065 4.3 90 194 0.65 3118 3182 3246 3.12 3086 3182 3278 4.66 100 212 0.63 3318 3392 3466 3.46 3284 3392 3500 5.05 110 230 0.59 3523 3607 3691 3.93 3487 3607 3728 5.61 120 248 0.53 3722 3817 3912 4.7 3683 3817 3950 6.59 125 257 0.49 3815 3915 4016 5.26 3775 3915 4055 7.31 130 266 0.44 3901 4008 4114 6 3861 4008 4154 8.27 140 284 0.33 4049 4166 4283 8.45 4008 4166 4325 11.46 150 302 0.20 4153 4280 4407 14.63 4110 4280 4450 19.56 2000 Aug 25 4 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series Table 2 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-221 and KTY81-222 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-221 RESISTANCE () KTY81-222 MIN. TYP. MAX. TEMP. ERROR (K) (%/K) RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) -55 -67 0.99 941 970 999 3.02 960 990 1020 3.02 -50 -58 0.98 990 1019 1049 2.92 1010 1040 1070 2.92 -40 -40 0.96 1094 1123 1153 2.74 1116 1146 1176 2.74 -30 -22 0.93 1205 1235 1264 2.55 1230 1260 1290 2.55 -20 -4 0.91 1325 1354 1382 2.35 1352 1381 1410 2.35 -10 14 0.88 1452 1480 1508 2.14 1481 1510 1538 2.14 0 32 0.85 1587 1613 1640 1.91 1619 1646 1673 1.91 10 50 0.83 1730 1754 1779 1.67 1765 1790 1815 1.67 20 68 0.80 1882 1903 1924 1.41 1920 1941 1963 1.41 25 77 0.79 1960 1980 2000 1.27 2000 2020 2040 1.27 30 86 0.78 2037 2059 2081 1.39 2078 2100 2123 1.39 40 104 0.75 2195 2222 2250 1.64 2239 2267 2295 1.64 50 122 0.73 2360 2393 2426 1.91 2407 2441 2475 1.91 60 140 0.71 2531 2571 2611 2.19 2582 2623 2664 2.19 70 158 0.69 2710 2757 2804 2.49 2764 2812 2860 2.49 80 176 0.67 2895 2950 3005 2.8 2 953 3009 3065 2.8 90 194 0.65 3086 3150 3214 3.12 3149 3214 3279 3.12 100 212 0.63 3285 3358 3431 3.46 3351 3426 3501 3.46 110 230 0.59 3488 3571 3655 3.93 3558 3643 3728 3.93 120 248 0.53 3684 3779 3873 4.7 3759 3855 3951 4.7 125 257 0.49 3776 3876 3976 5.26 3853 3955 4056 5.26 130 266 0.44 3862 3967 4073 6 3940 4048 4155 6 140 284 0.33 4009 4125 4241 8.45 4090 4208 4326 8.45 150 302 0.20 4112 4237 4363 14.63 4195 4323 4451 14.63 2000 Aug 25 5 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series Table 3 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-250 and KTY81-251 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-250 RESISTANCE () KTY81-251 MIN. TYP. MAX. TEMP. ERROR (K) (%/K) RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) -55 -67 0.99 911 980 1049 7.04 913 956 999 4.52 -50 -58 0.98 959 1030 1101 6.99 960 1004 1048 4.45 -40 -40 0.96 1060 1135 1210 6.91 1061 1106 1152 4.3 -30 -22 0.93 1168 1247 1327 6.84 1169 1216 1263 4.16 -20 -4 0.91 1283 1367 1451 6.77 1285 1333 1381 4.01 -10 14 0.88 1407 1495 1583 6.69 1408 1457 1507 3.84 0 32 0.85 1538 1630 1721 6.61 1539 1589 1639 3.67 10 50 0.83 1677 1772 1867 6.51 1678 1728 1778 3.48 20 68 0.80 1824 1922 2021 6.41 1825 1874 1923 3.28 25 77 0.79 1900 2000 2100 6.35 1900 1950 2000 3.18 30 86 0.78 1974 2080 2185 6.55 1975 2028 2080 3.33 40 104 0.75 2127 2245 2362 6.97 2129 2189 2248 3.64 50 122 0.73 2287 2417 2547 7.4 2289 2357 2425 3.97 60 140 0.71 2453 2597 2741 7.85 2455 2532 2609 4.31 70 158 0.69 2626 2785 2943 8.31 2628 2715 2802 4.67 80 176 0.67 2805 2980 3154 8.79 2807 2905 3003 5.05 90 194 0.65 2990 3182 3374 9.29 2993 3102 3212 5.43 100 212 0.63 3182 3392 3602 9.81 3185 3307 3429 5.84 110 230 0.59 3379 3607 3836 10.65 3382 3517 3652 6.45 120 248 0.53 3569 3817 4065 12.25 3573 3721 3870 7.53 125 257 0.49 3658 3915 4173 13.45 3662 3817 3973 8.33 130 266 0.44 3741 4008 4274 15.06 3745 3907 4070 9.4 140 284 0.33 3883 4166 4450 20.49 3887 4062 4237 12.96 150 302 0.20 3982 4280 4578 34.35 3987 4173 4359 22.02 2000 Aug 25 6 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series Table 4 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-252 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-252 RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) (%/K) -55 -67 0.99 959 1005 1050 4.52 -50 -58 0.98 1009 1055 1102 4.45 -40 -40 0.96 1115 1163 1211 4.3 -30 -22 0.93 1229 1278 1328 4.16 -20 -4 0.91 1351 1401 1452 4.01 -10 14 0.88 1480 1532 1584 3.84 0 32 0.85 1618 1670 1723 3.67 10 50 0.83 1764 1817 1869 3.48 20 68 0.80 1919 1970 2022 3.28 25 77 0.79 2000 2050 2100 3.18 30 86 0.78 2077 2132 2187 3.33 40 104 0.75 2238 2301 2364 3.64 50 122 0.73 2406 2478 2549 3.97 60 140 0.71 2581 2662 2743 4.31 70 158 0.69 2763 2854 2946 4.67 80 176 0.67 2 951 3054 3157 5.05 90 194 0.65 3147 3262 3376 5.43 100 212 0.63 3349 3477 3605 5.84 110 230 0.59 3556 3 697 3839 6.45 120 248 0.53 3756 3912 4068 7.53 125 257 0.49 3850 4013 4177 8.33 130 266 0.44 3937 4108 4278 9.4 140 284 0.33 4087 4271 4455 12.96 150 302 0.20 4191 4387 4583 22.02 2000 Aug 25 7 Philips Semiconductors Product specification Silicon temperature sensors MGG695 15 handbook, halfpage T (K) KTY81-2 series MSA922 4.8 handbook, halfpage KTY81-251 -252 R (k) 10 KTY81-220 3.2 5 KTY81-210 -221 -222 0 -5 1.6 -10 -15 -50 0 50 0 -100 100 150 Tamb (C) -50 0 50 100 150 200 Tamb (C) Icont = 1 mA. Fig.3 Sensor resistance as a function of ambient temperature; average values. Fig.2 Maximum expected temperature error (T). MGG700 5 R (k) 150 C Icont 125 C 4 MGG705 12 handbook, halfpage handbook, halfpage (mA) 100 C 8 75 C 3 50 C 25 C 2 0 C 4 -25 C -50 C 1 0 10-1 1 Icont (mA) 0 -50 10 0 50 100 150 Tamb (C) To keep the temperature error low, an operating current of Icont = 1 mA is recommended for temperatures above 100 C. Fig.4 Sensor resistance as a function of operating current. 2000 Aug 25 Fig.5 8 Maximum operating current for safe operation. Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series MGG703 handbook, halfpage 30 R () 20 10 0 -10 0 1 Icont (mA) 2 Tamb = 25 C. Fig.6 Deviation of sensor resistance as a function of operating current in still liquid. APPLICATION INFORMATION SYMBOL R25 2000 Aug 25 PARAMETER drift of sensor resistance at 25 C CONDITIONS 10000 hours continuous operation; Tamb = 150 C 9 TYP. 3.2 UNIT Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series PACKAGING Sensors in SOD70 encapsulation are delivered in bulk packaging, and also reel packaging for automatic placement on hybrid circuits and printed-circuit boards (see Figs 7 and 8). Note: Types in bulk packaging have a lead-to-lead distance of 2.54 millimetres. The lead-to-lead distance of types packaged on reel is 5.08 millimetres for spread lead types and 2.54 millimetres for straight lead types. P handbook, full pagewidth T A1 h (p) h A H2 W2 H1 H0 W0 L W1 W F1 MBH795 F2 D0 F t P2 P0 Fig.7 Configuration of bandolier: spread leads. 2000 Aug 25 t1 10 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series P handbook, full pagewidth T A1 h (p) h A H2 W2 H1 H0 W0 L W1 W F1 MBL214 F2 D0 F t P2 P0 Fig.8 Configuration of bandolier: straight leads. 2000 Aug 25 t1 11 Philips Semiconductors Product specification Silicon temperature sensors Table 5 KTY81-2 series Tape specification SPECIFICATIONS SYMBOL DIMENSION REMARKS MIN. NOM. MAX. TOL. UNIT A1 body width 4.4 - 4.8 - mm A body height 5 - 5.2 - mm T body thickness 3.6 - 4.2 - mm P pitch of component - 12.7 - 1 mm P0 feed hole pitch - 12.7 - 0.3 mm cumulative pitch error - - - 0.1 6.35 - 0.4 mm P2 feed hole centre to component - centre F lead-to-lead distance note 1 spread leads - 5.08 - +0.6/-0.2 mm straight leads - 2.54 - +0.6/-0.2 mm h component alignment - 0 1 - mm W tape width - 18 - 0.5 mm W0 hold-down tape width - 6 - 0.2 mm W1 hole position - 9 - +0.7/-0.5 mm W2 hold-down tape position - 0.5 - 0.2 mm H0 lead wire clinch height - 16.5 - 0.5 mm H1 component height - - 23.25 - mm L length of snipped leads - - 11 - mm D0 feed hole diameter - 4 - 0.2 mm t total tape thickness - - 1.2 - mm F1, F2 lead to snipped lead distance spread leads - 2.54 - +0.4/-0.2 mm straight leads - 1.27 - +0.4/-0.2 mm H2 clinch height - 2.5 - +0.5/0 mm (p) pull-out force 6 - - - N Note 1. Measured over 20 devices. 2000 Aug 25 12 to be measured at bottom of clinch at top of body t1 = 0.3 to 0.6 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series PACKAGE OUTLINE Plastic near cylindrical single-ended package; 2 in-line leads SOD70 c E d A L b 1 e D 2 b1 L2 L1 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) (1) UNIT A b b1 c D d E e L L1 max. L2 mm 5.2 5.0 0.48 0.40 0.66 0.56 0.45 0.40 4.8 4.4 1.7 1.4 4.2 3.6 2.54 14.5 12.7 2.5 0.7 0.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION REFERENCES IEC JEDEC EIAJ ISSUE DATE 98-05-25 SOD70 2000 Aug 25 EUROPEAN PROJECTION 13 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series DATA SHEET STATUS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS (1) Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Note 1. Please consult the most recently issued data sheet before initiating or completing a design. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2000 Aug 25 14 Philips Semiconductors Product specification Silicon temperature sensors KTY81-2 series NOTES 2000 Aug 25 15 Philips Semiconductors - a worldwide company Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstrae 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI), Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW, Tel. +48 22 5710 000, Fax. +48 22 5710 001 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 58088 Newville 2114, Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SAO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZURICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 5F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2451, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 60/14 MOO 11, Bangna Trad Road KM. 3, Bagna, BANGKOK 10260, Tel. +66 2 361 7910, Fax. +66 2 398 3447 Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye, ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 3341 299, Fax.+381 11 3342 553 For all other countries apply to: Philips Semiconductors, Marketing Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com SCA 70 (c) Philips Electronics N.V. 2000 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613520/04/pp16 Date of release: 2000 Aug 25 Document order number: 9397 750 07227