LED Lighting System
3Z4S-LT/LE Series
Datasheet
,%$.%84'%.%2!4)/.
NEW
This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must
understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
!UTHORIZED$ISTRIBUTOR
)NTHEINTERESTOFPRODUCTIMPROVEMENT
SPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE
#AT.O1%
0RINTEDIN*APAN
#3-?2??5
©/-2/.#ORPORATION!LL2IGHTS2ESERVED
/-2/.#ORPORATION)NDUSTRIAL!UTOMATION#OMPANY
/-2/.%,%#42/.)#3,,#
/NE#OMMERCE$RIVE3CHAUMBURG
),53!
4EL&AX
2EGIONAL(EADQUARTERS
/-2/.%52/0%"6
7EGALAAN*$(OOFDDORP
4HE.ETHERLANDS
4EL&AX
#ONTACTWWWIAOMRONCOM
4OKYO*!0!.
/-2/.!3)!0!#)&)#04%,4$
.O!!LEXANDRA2OAD,OBBY
!LEXANDRA4ECHNOPARK
3INGAPORE
4EL&AX
/-2/.#().!#/,4$
2OOM"ANKOF#HINA4OWER
9IN#HENG:HONG2OAD
0U$ONG.EW!REA3HANGHAI#HINA
4EL&AX
2 3
Index
P4
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P22
P25
Strobe Controller
Direct Ring Light
Low Angle Ring Light
Coaxial Light/Simulated Coaxial Episcopic Light
Shadowless Light
Bar Light/Line Light
Dome Light
High-powered Spot LED Light
IR Light
Direct Backlight
Edge-type Backlight
Square Oblique Light
UV Light
Spot LED Light
Parallel Light
CCTV Lens
CCTV Lens Option
Non-telecentric Macro Lens
New Power Supplies for MCEP/MSPP Series
New Power Supplies for MG-Wave Series
Optional Accessories
4 5
4
●The strobe intensity can be manually adjusted.
Strobe Controller
The Strobe Controller operates with
power supplied from the Camera Head.
The illumination is turned ON when the
Strobe Controller receives a trigger signal
from the Camera Head.
Simply connect the Camera and
Illumination Device with a single cable.
Adding the Strobe Controller
No Power Supply Required
= Large Cost Reduction
Strobe Controller
MLEK-C080E1LS
MLEK-C100E1TS2
MLEK-C100E1TSX
3Z4S-LT MLEK-C080E1LS (for F150-S1A, F160-S2 Camera)
3Z4S-LT MLEK-C100E1TS2 (for FZ� Camera)
3Z4S-LT MLEK-C100E1TSX (for ZFX-S/SC Camera)
Note: This configuration can also be used with the F150-S1A, F160-S2 or ZFX-S/SC Camera.
Note: When using the MLEK-C100E1TS2 and MLEK-C100E1TSX
Ratings and Specifications
Note 1: Illumination marked “●” in the Connection to Strobe Controller column of the Model Number Legend table can be used.
Note 2: Depends on the illumination used.
Note 3: Strobe intensity adjustment and variable range.
3Z4S-LT MLEK-C080E1LS (See note 1.)
0.83 A max. (when using 0.8-A illumination) (See note 2.)
Manual dial only
8.3 ms (standard)
Connected and mounted to F160-S2 or F150-S1A Camera
3Z4S-LT MLEK-C100E1TS2
Strobe output (synchronized with rising edge trigger)
Automatically set by FZ� Controller
100%
Connected and mounted to FZ-S�/FZ-S�2M Camera
3Z4S-LT MLEK-C100E1TSX
Automatically set by ZFX Controller
Connected and mounted to ZFX-S/SC Camera
1.0 A max. (when using 1.0-A illumination) (See note 2.)
External communications setting only (See note 3.)
Model
No. of outputs
Output current
Output control method
Output form
Output adjustment function
Variable output range
Strobe emission time
Strobe emission delay time
Allowable ON duty
Usage environment
Ambient temperature and humidity
Storage temperature and humidity
Mounting method
Cooling method
Degree of protection
Weight
Extension Cable
(purchased separately)
(Unit: mm)
Dimensions
Power Supply
for LED Illumination
LED Illumination
Vision Sensor
Camera
Vision Sensor
Camera
Vision Sensor
Controller
Vision Sensor
Controller
LED
Illumination
Strobe Controller
1-channel output
Constant current control
0 to 100%
Indoor use at a max. altitude of 2,000 m, with no inflammable or corrosive gases present, and no adhesion of foreign matter
0 to 45˚C, 80% up to 31˚C and then dropping linearly to 50% at 40˚C
-20 to 85˚C, 20 to 80% humidity (with no condensation)
Natural air cooling
IP30 (IEC 60529)
Approx. 80 g
M-RCB4��L (4-pin Extension Cable) (indicate length in the 2 square boxes (��): 01=1m, 02 = 2 m, 03 = 3 m)
Ton: 30 μs max. (at max. setting)
Toff: 10 μs max. (at max. setting)
MLEK-C080E1LS MLEK-C100E1TS2
MLEK-C100E1TSX
60
26
72.5
30.5
103.5
150+20
–0
200+20
–0
31
31
14.5
3
24.5
4-3.2 dia.
3
4-3.2 dia.
2631
24.5
Provided spacer (t=3)
6.25
1
45.5
3-2.5 dia.
1828
40.5
Provided spacer (t=8)
3-2.5 dia.
8-2.5 dia.
2-1.5 dia.
24
28
150+20
–0
40.5
72.5
118.5
46
14.5
2.5
18
200+20
–0
200+20-0
150+20-0 72.5
12 28
3.7
22
29
6
6
14.5
8.5
2-C2
(Including the other side)
35.7
6 7
Direct Ring Light
MDRL Series
Low Angle Ring Light
MLRL Series
Direct Ring Light
Low Angle Ring Light
List of Models
Dimensions
Options
Dimensions
List of Models
3Z4S-LT MDRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Model Number Legend
0.11
0.17
0.17
0.17
0.24
0.37
0.37
0.37
0.20
0.31
0.31
0.31
0.36
0.55
0.55
0.55
0.34
0.52
0.52
0.52
0.36
0.55
0.55
0.55
0.64
0.96
0.96
0.96
1.12
1.55
1.55
1.55
50
65
65
130
150
120
180
520
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
230
230
230
230
230
230
230
MLRL-CR25 A
Red
MLRL-CG25 A
Green
MLRL-CB25 A
Blue
MLRL-CW25 A
White
MLRL-CR46 B
Red
MLRL-CG46 B
Green
MLRL-CB46 B
Blue
MLRL-CW46 B
White
MLRL-CR48 C
Red
MLRL-CG48 C
Green
MLRL-CB48 C
Blue
MLRL-CW48 C
White
MLRL-CR68 D
Red
MLRL-CG68 D
Green
MLRL-CB68 D
Blue
MLRL-CW68 D
White
MLRL-CR100 E
Red
MLRL-CG100 E
Green
MLRL-CB100 E
Blue
MLRL-CW100 E
White
0.15
0.24
0.24
0.24
0.17
0.27
0.27
0.27
0.30
0.47
0.47
0.47
0.57
0.61
0.61
0.61
0.96
1.03
1.03
1.03
70
80
110
190
320
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
230
230
230
230
25 dia.
38 dia.
18.5
50 dia. 75 dia.
56 dia.
46 dia.
10
74 dia.
60 dia.
48 dia.
Four, M3 mounting holes with
a depth of 5 mm equally
spaced along circumference
19
100 dia.
84 dia.
68 dia.
22
140 dia.
125 dia.
100 dia.
24
Four, M3 mounting holes with a depth of 5 mm
equally spaced along circumference
Options
Diffusion and Polarizing plates are available to prevent the vignetting of image. Diffusion ring
Model Applicable model
Good for producing more uniform illumination than with direct lighting and for reducing glare and reflections.
32 dia.
20 dia.
10 dia.
4.5
16
48 dia.
38 dia.
16 dia.
5
15
66 dia.
50 dia.
31 dia.
8.5
20
90 dia.
70 dia.
50 dia.
5.5
20
120 dia.
90 dia.
56 dia.
31.5
11.5
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
Four, M3 mounting holes with
a depth of 5 mm equally
divided along circumference
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
16
50 dia.
4
40 dia.
28 dia.
See “Adapter: MAD Series” on page 25.For detail,
3Z4S-LT MLRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Model Number Legend
�: Production by orderThe MDRL-C*35 provides perpendicular illumination to enable a long working distance.
The recommended working distance is 65 mm or longer, but if a reflective surface is being illuminated, the working distance can be as long as 200 mm.
�: Production by order
�
�
�
�
�
�
�
�
�
�
�
�
�
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
Four, M3 mounting
holes with a depth of
3 mm equally divided
along circumference
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
MDRL-CR10 A Red
MDRL-CG10 A Green
MDRL-CB10 A Blue
MDRL-CW10 A White
MDRL-CR16 B Red
MDRL-CG16 B Green
MDRL-CB16 B Blue
MDRL-CW16 B White
MDRL-CR28 C Red
MDRL-CG28 C Green
MDRL-CB28 C Blue
MDRL-CW28 C White
MDRL-CR31 D Red
MDRL-CG31 D Green
MDRL-CB31 D Blue
MDRL-CW31 D White
MDRL-CR35 E Red
MDRL-CG35 E Green
MDRL-CB35 E Blue
MDRL-CW35 E White
MDRL-CR36 F Red
MDRL-CG36 F Green
MDRL-CB36 F Blue
MDRL-CW36 F White
MDRL-CR50 G Red
MDRL-CG50 G Green
MDRL-CB50 G Blue
MDRL-CW50 G White
MDRL-CR56 H Red
MDRL-CG56 H Green
MDRL-CB56 H Blue
MDRL-CW56 H White
MDF-LR25 MLRL-C (R,G,B,W) 25
MDF-LR48 MLRL-C (R,G,B,W) 48
MDF-LR68 MLRL-C (R,G,B,W) 68
MDF-LR100 MLRL-C (R,G,B,W) 100
C(MLRL-C 48)B(MLRL-C 46)
E(MLRL-C 100)D(MLRL-C 68)
A(MLRL-C 25)
A(MDRL-C 10)
E(MDRL-C 35) F(MDRL-C 36) G (MDRL-C 50) H(MDRL-C 56)
B(MDRL-C 16) D(MDRL-C 31)C(MDRL-CR28)
66 dia.
50 dia.
36 dia.
7.5
17
4.5
70 dia.
35 dia.
22
90°
Four, M3 mounting holes with
a depth of 5 mm equally
spaced along circumference
on top surface PCD 50
Standard cable length: 500 mmMounting hole position: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.) Standard cable length: 500 mmMounting hole locations: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
8 9
Coaxial Light/Simulated Coaxial Episcopic Light
Shadowless Light
MSRL Series
MSLL Series
MSQL Series
MCEL Series
MSCL Series
Coaxial Light/Simulated Coaxial Episcopic Light
Shadowless Light
Line up of Shadowless
List of Models
Dimensions
Model Number Legend
0.32
0.50
0.50
0.50
0.45
0.69
0.69
0.69
0.57
0.80
0.80
0.80
140
210
270
080
080
080
080
080
080
080
080
080
080
080
080
74 dia.
Four, M3 mounting holes
with a depth of 4 mm
Four, M3 mounting holes
with a depth of 4 mm
Four, M3 mounting holes
with a depth of 4 mm
Four, M3 mounting holes with a depth of 3 mm
Note: The reflection panel is detatchable.
Four, M3 mounting holes
with a depth of 4 mm
20 dia.
18
50 dia.
30
36
Reflection
panel
30
20
15
15
17
104 dia.
33 dia.
70 dia.
17
123 dia.
44 dia.
70 dia.
101 dia. (Lighting surface) 126 dia. (Lighting surface)
80 dia. (Lighting surface)
(Lighting surface)
(Lighting surface)
46.1 dia.
(Lighting surface)
40
109 dia.
120 dia.
136 dia.
18
Line up of Shadowless Low Angle Square
Line up of Shadowless Low Angle Ring
0.62
1.10
1.10
1.10
320
080
230
230
230
0.09
0.14
0.14
0.14
0.13
0.20
0.20
0.20
80
120
080
080
080
080
080
080
080
080
List of Models
Dimensions
Model Number Legend
Lineup of Coaxial Light
Lineup of Simulated Coaxial Episcopic Light
*Always run the cooling fan to prevent heat build-up.
*A Power Supply Extension Cable (M-RCB00□L) is require for the built-in fan. This is in addition to the normal Extension Cable.
�: Production by order
Refer to page 26.
0.04
0.03
0.03
0.03
0.09
0.20
0.20
0.20
0.16
0.31
0.31
0.31
0.33
0.66
0.66
0.66
0.62
1.11
1.11
1.11
2.14
2.07
2.07
2.07
110
160
320
520
920
080
080
080
080
080
080
080
080
080
080
080
080
080
230
230
230
230
230
230
230
35
080
080
080
080
8 dia. 6 dia.
(Lighting surface)
14 dia. 30
12
56
17 17 15 7
30
24
24
Three, M2 mounting holes
with a depth of 4 mm Four, M3 mounting
holes with a depth
of 8 mm
18 X 18
18 X 18
18
40
12
20
Four, M3 mounting holes
with a depth of 4 mm
38
70
20.5
Three, M2
mounting holes
with a depth
of 4 mm
Glass plate
28 dia.
39
28 dia.
60
40
30
Three, M2 mounting holes
with a depth of 4 mm
Four, M3 mounting
holes penetration
30
93
40
1820
57
Four, M3 mounting holes
with a depth of 4 mm
56
Glass plate
50 X 50
110
82
42
60
75
74
45 14
Glass plate 70
106
20
70
Four, M4 mounting holes
with a depth of 4 mm
Four, M4 mounting holes
with a depth of 4 mm
110
145
56
10
Cooling fan
42
105
Glass plate
12
42
Shadowless Low Angle Square
Shadowless
Shadowless Low Angle Ring
Coaxial
3Z4S-LT MCEL-C
External diameter of the point
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Box height Revision code
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Simulated Coaxial
�
�
�
�
�
�
�
�
�
�
�
�: Production by order
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
MCEL-CR8 A Red
MCEL-CG8 A Green
MCEL-CB8 A Blue
MCEL-CW8 A White
MSCL-CR24 B Red
MSCL-CG24 B Green
MSCL-CB24 B Blue
MSCL-CW24 B White
MSCL-CR39 C Red
MSCL-CG39 C Green
MSCL-CB39 C Blue
MSCL-CW39 C White
MSCL-CR56-B D Red
MSCL-CG56-B D Green
MSCL-CB56-B D Blue
MSCL-CW56-B D White
MSCL-CR74-B E Red
MSCL-CG74-B E Green
MSCL-CB74-B E Blue
MSCL-CW74-B E White
MSCL-CR105-B* F Red
MSCL-CG105-B* F Green
MSCL-CB105-B* F Blue
MSCL-CW105-B* F White
MSRL-CR20 A Red
MSRL-CG20 A Green
MSRL-CB20 A Blue
MSRL-CW20 A White
MSRL-CR33 B Red
MSRL-CG33 B Green
MSRL-CB33 B Blue
MSRL-CW33 B White
MSRL-CR44 C Red
MSRL-CG44 C Green
MSRL-CB44 C Blue
MSRL-CW44 C White
MS
Q
L-CR32 E Red
MS
Q
L-CG32 E Green
MS
Q
L-CB32 E Blue
MS
Q
L-CW32 E White
MS
Q
L-CR48 F Red
MS
Q
L-CG48 F Green
MS
Q
L-CB48 F Blue
MS
Q
L-CW48 F White
MSLL-CR109 D Red
MSLL-CG109 D Green
MSLL-CB109 D Blue
MSLL-CW109 D White
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
External side dimension (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
77 X 77
32 X 32
15 X 15
48 X 48
30 X 30
26 X 26
10 X 10
10 X 10
3Z4S-LT MSRL-C
3Z4S-LT MSLL-C
3Z4S-LT MSQL-C
3Z4S-LT MSCL-C
A(MCEL-C 8) B(MSCL-C 24) C(MSCL-C 39)
A(MSRL-C 20)
C(MSRL-C 44) D(MSLL-C 109) E(MSQL-C 32)
B(MSRL-C 33) F(MSQL-C 48)
D(MSCL-C 56) E(MSCL-C 74) F(MSCL-C 105)
Four, M3 mounting holes with a depth of 3 mm
Standard cable length: 500 mm
Standard cable length: 500 mm Mounting hole locations:
A to D: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
10 11
Bar Light/Line Light
MBRL Series
MLNL Series
Bar Light/Line Light
Dome Light
MBRL Series
MLNL Series
Model Number Legend
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Line width
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
Lineup of Bar Light
Lineup of Line Light
MLNL-CR192 D Red
MLNL-CG192 D Green
MLNL-CB192 D Blue
MLNL-CW192 D White
MBRL-CR5015 A Red
MBRL-CG5015 A Green
MBRL-CB5015 A Blue
MBRL-CW5015 A White
MBRL-CR7530 B Red
MBRL-CG7530 B Green
MBRL-CB7530 B Blue
MBRL-CW7530 B White
MBRL-CR13015 C Red
MBRL-CG13015 C Green
MBRL-CB13015 C Blue
MBRL-CW13015 C White
0.13
0.26
0.26
0.26
0.36
0.52
0.52
0.52
0.32
0.53
0.53
0.53
50
120
85
080
080
080
080
080
080
080
080
080
080
080
080
0.18
0.36
0.36
0.36
420
080
080
080
080
Model Number Legend
External size
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Dimensions
130
(Lighting surface)
15
(Lighting surface)
17
20
Two, M3 mounting holes
with a depth of 3 mm
140
135
80
60
30
50
(Lighting surface)
15
(Lighting surface)
17
20
Two, M3 mounting holes
with a depth of 3 mm
55 75
(Lighting surface)
30
(Lighting surface)
32
18
Two, M3 mounting
holes with a depth of 4 mm
85
80
50
MDML-CR50 A Red
MDML-CG50 A Green
MDML-CB50 A Blue
MDML-CW50 A White
MDML-CR156 B Red
MDML-CG156 B Green
MDML-CB156 B Blue
MDML-CW156 B White
0.24
0.37
0.37
0.37
1.16
1.86
1.86
1.86
1600
130
230
230
230
230
080
080
080
080
High-powered Spot LED Light
MCEP Series
Model Number Legend
List of Models
List of Models
Luminescent color
(Red=R, Green=G, Blue=B, White=W)
*The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant
wavelengths of these LEDs. Colors may appear to be different even for the same model number.
27 dia.
6 dia. (Lighting part)
3.1 dia.
14 dia.
8 dia.
12
50
30 8
Housing
LED
Cable
Connector
500
1P
Pin number
Signal
1P NC
2P
Power supply
(+)
3P
Power supply
(-)
Two, M2 pan
head screws
50
16.3
(Lighting surface)
60
LED line lighting unit
205
205
210
192
(Lighting surface)
Four, M2 mounting holes
with a depth of 8 mm
Two, M4 mounting holes
with a depth of 10 mm
(Both sides)
M3 knurled screw
(for adjusting the LED position)
Condenser lens
24
Eight, M3 enameled screw
(for supporting the LED light)
1520
28 dia.
3.1 dia.
14 dia.
4.9 dia.
CN1
CN2
CN3
CN4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
111 dia.
156 dia.
26 dia.
20.5 49.5
350 38
(500)
4083 37
LED
Light guide dome
Housing
SENS BOX
Cable Connector
Cable
Diffusion board
Half mirror
Cover glass
Four, M4 mounting
holes with
a depth of 10 mm
PCD120
Dome Light
MDML Series
5.5
45°
45°
Four, M3 mounting
holes with a depth
of 4 mm
PCD 30
40
3.1 dia.
47 dia.
(Lighting part)
50 dia.
11 dia.
Model
Dimension
Liminescent
Color
Dominant wavelength
*
Color temperature
Max. rated current IFM (A)
Weight (g)
Connection to
strobe controller
Dimensions
Dimensions
Removing the Point Rod
�: Production by order
�
�
�
�
�
�: Production by order
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension LiminescentColor Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
3Z4S-LT MBRL-C 3Z4S-LT MDML-C
3Z4S-LT MCEP-C 8
3Z4S-LT MLNL-C
A(MBRL-C 5015)
A(MCEP-C 8)
C(MBRL-C 13015) D(MLNL-C 192)
B(MBRL-C 7530)
A(MDML-C 50) B(MDML-C 156)
MCEP-CR8 A Red 620.5 645nm – 0.35
MCEP-CG8 A Green 525 535nm – 0.35
MCEP-CB8 A Blue 470 480nm – 0.35
MCEP-CW8 A White All 5000 6000K 0.35
27 dia.
18 dia.
(Lighting part)
25 dia.
27.9
5
1 Two, M2 pan head screws
6 dia.
(Lighting part)
2 Separator for the
MCEP-AD Series (27.1)
Undo the two screws then remove .
It can be connected to the MCEP-AD Series
Standard cable length: 500 mmStandard cable length: 500 mm
Standard cable length: 500 mm
Mounting hole locations:
A to C: Arranged around the center of the mounting surface.
12 13
IR Light
IR Light
Direct Backlight
Direct Backlight
MDBL Series
MDBC Series
Shell type
Chip mounting type
Model Number Legend
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Lineup of Shell type
Lineup of Chip mounting type
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Chip type
List of Models
MDBL-CR25 A Red
MDBL-CG25 A Green
MDBL-CB25 A Blue
MDBL-CW25 A White
MDBL-CR70 B Red
MDBL-CG70 B Green
MDBL-CB70 B Blue
MDBL-CW70 B White
MDBL-CR100 C Red
MDBL-CG100 C Green
MDBL-CB100 C Blue
MDBL-CW100 C White
MDBL-CR180100 D Red
MDBL-CG180100 D Green
MDBL-CB180100 D Blue
MDBL-CW180100 D White
MDBC-CR100 E Red
MDBC-CG100 E Green
MDBC-CB100 E Blue
MDBC-CW100 E White
MDBC-CR150 F Red
MDBC-CG150 F Green
MDBC-CB150 F Blue
MDBC-CW150 F White
Dimensions
4-3.5 dia.
100
90
70
(Lighting surface)
70
(Lighting surface)
60
72
30
Diffusion board
120
130
50
102
100
(Lighting surface)
100
(Lighting surface)
30
Diffusion board
4-3.5 dia.
49
4-3.5 dia.
25
(Lighting surface)
25
(Lighting surface)
17
27
24
Diffusion board
42
130
100 (Lighting surface)
180 (Lighting surface)
30
Diffusion board
4-3.5 dia.
120
130
182
152 10
150 (Lighting surface)
150 (Lighting surface)
Diffusion board
160
100
15
5
2-4.5 dia.
102 10
100 (Lighting surface)
100 (Lighting surface)
Diffusion board
110
80
5
2-4.5 dia.
R 10
G, B, W 15
0.14
0.27
0.27
0.27
0.48
0.96
0.96
0.96
1.43
1.55
1.55
1.55
2.30
2.30
2.30
2.30
60
190
290
520
080
080
080
080
080
230
230
230
230
230
230
230
230
230
230
230
0.81
0.95
0.95
0.95
0.99
2.14
2.14
2.14
170
310
230
230
230
230
230
230
230
230
MDRL Series
MSRL Series
MBRL Series
MDBL Series
Model Number Legend
Dimensions
List of Models
MDRL-CIR31 A Infrared
MSRL-CIR20 B Infrared
MBRL-CIR7530 C Infrared
MDBL-CIR70 D Infrared
*The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant wavelengths of these LEDs. Colors may appear to be different even for the same
model number.
See the explanation
of each series model
Luminescent color
(IR: Infrared)
DR=Direct ring
SR=Shadowless ring
BR=Bar
DB=Direct backlight
66 dia.
50 dia.
31 dia.
8.5
20
Four, M3 mounting holes
with a depth of 4 mm equally
divided along circumference
A(MDRL-CIR31)
75 (Lighting surface)
30
(Lighting surface)
32
18
Four, M3 mounting holes
with a depth of 4 mm
80
85
50
C(MBRL-CIR7530)
74 dia.
Four, M3 mounting holes
with a depth of 4 mm
20 dia.
18
50 dia.
46.1 dia.
(Lighting surface)
B
(
MSRL-CIR20
)
D(MDBL-CIR70)
4-3.5 dia.
90
100
70
(Lighting surface)
70
(Lighting surface)
60
72
30
Diffusion board
0.42
0.36
0.40
0.53
130
140
120
190
080
080
080
080
�
�
�
�
�
�
�: Production by order
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
3Z4S-LT M L - C IR 3Z4S-LT MDBL-C
3Z4S-LT MDBC-C
A(MDBL-C 25)
C(MDBL-C 100)
B(MDBL-C 70) D(MDBL-C 180100) E (MDBC-C 100) F(MDBC-C 150)
Standard cable length: 500 mm
Standard cable length: 500 mm
Mounting hole locations:
A and B: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
C: Arranged around the center of the mounting surface.
14 15
Edge-type Backlight
Square Oblique Light
Square Oblique Light
MDQL Series
Model Number Legend
List of Models
MDQL-CR58 A Red
MDQL-CG58 A Green
MDQL-CB58 A Blue
MDQL-CW58 A White
MDQL-CR108 B Red
MDQL-CG108 B Green
MDQL-CB108 B Blue
MDQL-CW108 B White
Dimensions
External size
Luminescent color (Red=R, Green=G, Blue=B, White=W)
080
080
080
080
080
230
230
230
0.09
0.17
0.17
0.17
0.42
0.84
0.84
0.84
55
210
54
Eight, M2 depth
4-4M
30
90°
3
60
70
108
54
60
70
42
(Lighting surface)
15 (Lighting surface)
108
Base
Cable
Housing
LED
3.1 dia.
60
60
Housing
LED
58
58
30
30
30
30
12
Four, M2.6
3.1 dia.
25
25
3Z4S-LT MDQL-C
Edge-type Backlight
MEBL Series
Model Number Legend
Dimensions
List of Models
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
MEBL-CR25 A Red
MEBL-CG25 A Green
MEBL-CB25 A Blue
MEBL-CW25 A White
MEBL-CR50 B Red
MEBL-CG50 B Green
MEBL-CB50 B Blue
MEBL-CW50 B White
MEBL-CR7050 C Red
MEBL-CG7050 C Green
MEBL-CB7050 C Blue
MEBL-CW7050 C White
MEBL-CR10080 D Red
MEBL-CG10080 D Green
MEBL-CB10080 D Blue
MEBL-CW10080 D White
MEBL-CR145 E Red
MEBL-CG145 E Green
MEBL-CB145 E Blue
MEBL-CW145 E White
39
7.5 94
70 (Lighting surface)
50
(Lighting surface)
71
60 2-3.5 dia. 2-C2
48
74
860
90
80
50 (Lighting surface)
50 (Lighting surface)
132
100
120
110
8
11
80 (Lighting surface)
100 (Lighting surface)
6.5
45
3
15
25 (Lighting surface)
25 (Lighting surface)
27
2-3.5 dia.
45
110
140
230
460
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
080
0.03
0.04
0.04
0.04
0.17
0.29
0.29
0.29
0.15
0.25
0.25
0.25
0.32
0.57
0.57
0.57
0.45
0.8
0.8
0.8
3Z4S-LT MEBL-C
145 (Lighting surface)
120
145 (Lighting surface)
185
185
195
8
14
4-C2
�
�
�
�
�
�: Production by order
�: Production by order
�
�
4-3.4 dia.
6 dia. through counter
bore depth 3.3
4-3.4 dia.
6 dia. through counter
bore depth 3.3
4-3.4 dia.
6 dia. through counter
bore depth 3.3
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
Model Dimension Liminescent Color Max. rated current IFM (A) Weight (g) Power supply
Connection to strobe controller
A(MEBL-C 25)
D(MEBL-C 10080) E(MEBL-C 145)
B(MEBL-C 50) C(MEBL-C 7050)
A(MDQL-C 58) B(MDQL-C 108)
Standard cable length: 500 mm
Standard cable length: 500 mm
16 17
UV Light
Parallel Light
Spot Led Light
UV Light
Spot Led Light Parallel Light
Model Number Legend
List of Models
Mounting hole locations:
A: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
B: Arranged around the center of the mounting surface.
Dimensions
MDRL-CUV31 A
Ultraviolet
MBRL-CUV7530 B
Ultraviolet
MDQL-CUV108 C
Ultraviolet
0.36
0.36
0.36
130
120
210
080
080
080
MDRL Series
MBRL Series
Standard cable length: 500 mm
MDQL Series
DR=Direct ring
BR=Bar
DQ=Square oblique Luminescent color (Ultra violet=UV)
See the explanation of each
series model.
Model Number Legend
Model Dimension Max. rated current IFM (A) Power supply
Weight (g)
66 dia.
31 dia.
75°
20
3.1 dia.
8.5
Four, M3 mounting holes
with a depth of 4 mm
PCD50
A(MDRL-CUV31) B(MBRL-CUV7530)
30
32
18
85
80
50
75
(Lighting surface)
(Lighting surface)
C(MDQL-CUV108)
54
4-4M
60
70
108
42
54
70
15
(Lighting surface)
108
60
60
Eight, M2 mounting
holes with a depth
of 3 mm
30
90°
3
(Lighting surface)
3.1 dia.
3.1 dia.
MCBP Series
Model Number Legend
List of Models
Dimensions
MSPP-CR42 A Red 0.7 460g MLEP-A070 series
MSPP-CW42 A White 0.7 460g MLEP-A070 series
Luminescent color (Red=R, White=W)
Effective size (Lighting part)
Luminescent color (Red=R, White=W)
Size (length and width)
*Always connect a Conversion Cable (3Z4S-LT M-RCB301XS) when connecting the power supply.
MSPP Series
(CE Marking)
Dimensions
260
�: Production by order
102
30
80
601540
20
5
46
34
20
28
38
Four, M3 mounting holes
with a depth of 4 mm
Screw with a hexagonal
holes M3
Four, M3 mounting
holes with a
depth of 6 mm
List of Models
A
A
A
MCBP-CG3430
MCBP-CB3430
MCBP-CW3430
Green
Blue
White
�0.07
0.07
0.07
080
080
080
Wide projection
MSPP-CR74 B Red 0.7 600g MLEP-A070 series
MSPP-CW74 B White 0.7 600g MLEP-A070 series
Nallow projection
(6 dia.)
(6 dia.)
150
CN1
1
23
4
Screw for adjusting light focus Screw for adjusting light focus
56
58 dia. 90 dia.
42 dia.
(Effective lighting part)
74 dia.
(Effective lighting part)
40
12.5
5
Four, M5 mounting holes with a depth of 8 mm
(including the other side)
Four, M5 mounting holes with a depth of 8 mm
(including the other side)
150
40 5
12.5
CN1
1
2
3
4
Liminescent
Color
Connection to strobe controller
Dimension
Weight (g)
Liminescent
Color
Max. rated current IFM (A)
Power supply
Connection to strobe controller
Model
Dimension
Weight (g)
Liminescent
Color
Max. rated current IFM (A)
Power supply
Connection to strobe controller
Model
Dimension
Weight (g)
Liminescent
Color
Max. rated current IFM (A)
Power supply
Connection to strobe controller
Model
3Z4S-LT M L - C UV 3Z4S-LT MSPP-C
3Z4S-LT MCBP-C
Two, M2 mounting holes
with a depth of 3 mm
Two, M3 mounting holes
with a depth of 4 mm
A(MSPP-C 42)
A(MCBP-C 3430)
B(MSPP-C 74)
102 117
72 87
18 19
CCTV Lens
ML-N Series
CCTV Lens
CCTV Lens Option Non-telecentric Macro Lens
Dimensions
List of Models
CCTV Lens Option
ML Series ML Series
List of Models Configuration
3Z4S-LE ML-EXR* 7-piece set
(0.5, 1, 2, 5, 10, 20, 40)
3Z4S-LE ML-1.5X
3Z4S-LE ML-2X
3Z4S-LE ML-2.5X
3Z4S-LE ML-3X
3Z4S-LE ML-4X
3Z4S-LE ML-PL270
3Z4S-LE ML-PL255
3Z4S-LE ML-PL305
Lens Rear converter Lens CCD Camera
A(ML-0614)
17.52
6.5
C-mount
30 dia.
A(30)
B(ML-0813)
C(ML-1214)
17.52
M27 P0.5
30 dia.
29.3 dia.
A(34.5)
C-mount
29.4 dia.
D(ML-1614)
17.52
M27 P0.5
1.4 4
30 dia.
29.3 dia.
A(24.5)
16 dia.
C-mount
H(ML-7527/ML10035)
A 4
M30.5. P0.5
17.52
29.4 dia.
C-mount
20.5 dia.
32 dia.
F(ML-3519)
4
4.8
M27 P0.5
30 dia.
C-mount
16 dia.
17.53
A(29)
Locking screw for iris
Locking screw for focus
E(ML-2514)
17.52
4 1.6
M27 P0.5
C-mount
17 dia.
A(24.5)
29.3 dia.
30 dia.
G(ML-5018) 17.52
4
C-mount
M30.5 P0.5
32 dia.
A(37)
3Z4S-LE ML-0614
3Z4S-LE ML-0813
3Z4S-LE ML-1214
3Z4S-LE ML-1614
3Z4S-LE ML-2514
3Z4S-LE ML-3519
3Z4S-LE ML-5018
3Z4S-LE ML-7527
3Z4S-LE ML-10035
Focus (F No.)
Field of view (V X H) Closest distance (m)
Filter screw
Dimension
Model
Focal distance f (mm) Total length A (mm)
Maximum compatible CCD
Camera Mount
6
8
12
16
25
35
50
75
100
42.3°×54.6°
45.0°×57.8°
21.9°×29.0°
23.0°×30.4°
21.6°×28.5°
10.8°×14.4°
7.9°×10.5°
4.9°×6.5°
3.8°×5.1°
0.2
0.3
0.4
0.5
1
M27 P0.5
M25.5 P0.5
M27 P0.5
M30.5 P0.5
60
40
45
50
60
65
A
B
C
D
E
F
G
H
Weight (g)
30
34.5
24.5
29
37
42.5
43.9
1/2 Inch
2/3 Inch
1/2 Inch
2/3 Inch
1 Inch
2/3 Inch
C-Mount
Non-telecentric Macro Lens
List of Models
Dimensions
A(ML01-327N) B(ML03-181N)
X0.5
1/2"CCD
(O/I=199)
24.2 49 2 4
17.526
C(ML05-132N)
φ30
W.D 132.5±6.6
C-mount
1/2"CCD
X1.0
(O/I=177.5)
24.2 70.4 2
17.526
4
D(ML1-89N)
W.D 89.6±4.5
φ30
C-mount
1/2"CCD
X0.3
4
42.1 2
17.3
17.526
φ30
C-mount
W.D 181.3±9
(O/I=240.9)
*The field of depth is calculated based on an image equivalent to 320 horizontal TV lines taken with a 1/2" CCD camera.
X0.1
1/2"CCD
19.3
4
2
17.526
10.3
30 dia.
0.1
0 -
16 dia.
C-mount
(O/I=364.5)
W.D 327.7±16.4
3Z4S-LE ML01-327N
3Z4S-LE ML03-181N
3Z4S-LE ML05-132N
3Z4S-LE ML1-89N
0.1
0.3
0.5
1.0
A
B
C
D
4.71
6.11
6.08
8.82
327.7 37.66mm 33.9μm
14.6μm
11.7μm
7.9μm
0.4% max.
0.2% max.
0.08% max.
0.04% max.
181.3 5.43mm
132.5 1.95mm
89.6 0.7mm
Model
Magnification Dimension
Effective FNO
O/I (mm)
Depth of field*
Resolution TV distortion
364.5
240.9
199
177.5
WD (mm)
Polarizing Filter
Close-up Ring
Rear Converter Lens
(Filter screw)
(C-mount screw)
0B
(34.5)
30 dia.
28 dia.
M25.5
P0.5
29 dia.
6.8
15 dia.
17.526
4
1-32
UNF
16
0.5
C
TV LENS 8mm1:1.3
∞
21.3
1
4
8
m
*These Close-up Rings are also available individually. Order using the following model number, replacing
the box with the desired length: 3Z4S-LE ML-EXR@.
Inquire concerning prices.
Model
Model Length (mm)
Model
0.1
0 -
16 dia.
0.1
0 -
16 dia.
0.1
0 -
16 dia.
F1.4 Close
F1.3 Close
F1.4 Close
F1.9 Close
F1.8 Close
F2.7 Close
F3.5 Close
20 21
NEW MLEP Analog Series
Ratings and Specifications Ratings and Specifications
Dimensions
Models are available with an analog light adjustment and for either one or three channels.
A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
A(MLEP-A035W1LR/MLEP-A070W1LR) B(MLEP-A035W3LR/MLEP-A070W3LR)
NEW MLEP Digtal Series
Models are available with a digital light adjustment and for either one or three channels.
A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Connection Specifications I/O Circuit Diagrams
1
8
9
15
8bit digital input 20 (LSB)
8bit digital input 21
8bit digital input 22
8bit digital input 23
8bit digital input 24
8bit digital input 25
8bit digital input 26
8bit digital input 27 (MSB)
COMMON (+)
Output ON/OFF signal
NC
NC
NC
NC
NC
1
8
9
15
Output ON/OFF signal (+)
Output ON/OFF signal (-)
NC
NC
NC
NC
NC
NC
NC
External 0-5V Analog dimmer signal input
External input GND
NC
2.5 VDC bias power supply output
NC
NC
Dimensions
A(MLEP-A035W1LRD/MLEP-A070W1LRD) B(MLEP-A035W3LRD/MLEP-A070W3LRD)
Connection Specifications I/O Circuit Diagrams
3.9k
5V
47k
Relay Photo-coupler Transistor
COMMON
LSB
5V,24V
AA A
A3.9k
3.9k
MSB
AON/OFF
5V
47k
5V
47k
1
8
10
9
3.9k
5V
47k
10k
0-5V
2.5V Ref
Relay Photo-coupler Transistor
ON/OFF
5V,24V
AA A
(Do not use.)
2
10
11
13
1
These constant-current power supplies are designed specifically for the MCEP Series of
High-power LED Spot Lights and MSPP Series of LED Spot Lights.
MLEP-A035W LR/MLEP-A070W LR MLEP-A035W LR/MLEP-A070W LR MLEP-A035W LRD/MLEP-A070W LRD MLEP-A035W LRD/MLEP-A070W LRD
New Power Supplies for MCEP/MSPP Series
Model
AC Type
Output
Input voltage
Input current
Surge current
Operating temperature
Output system
Output control system
External light control
Lighting on/off function
Cooling system
Installation
Weight
MLEP-A035W
1LR-100V
MLEP-A035W1
LR-200V
MLEP-A070W1
LR-100V
MLEP-A070W1
LR-200V
MLEP-A035W3
LR-100V
MLEP-A035W3
LR-200V
MLEP-A070W3
LR-100V
MLEP-A070W3
LR-200V
100V 200V 100V 200V 100V 200V 100V 200V
Single-channel out put
max.350 mA
Single-channel out put
max.700 mA
3-channel out put
for each channel max.350 mA
3-channel out put
for each channel max.700 mA
100 - 240V AC 50 / 60Hz
Dimension A
100 - 240V AC 50 / 60Hz
B
0.35 / 0.25A
(at AC 100/240V)
0.35/0.25 A
(at AC 100/240V)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
0 to +45˚C 0 to +45˚C
Continuous DC output Continuous DC output
Constant current control (the current can be changed) Constant current control (the current can be changed)
Supported (0 to 5V) Supported (0 to 5V)
Supported (photocoupler insulation) Supported (photocoupler insulation)
Natural air cooling forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit Horizontal installation on the rubber supports at the bottom of the unit
Approximately 0.9kg Approximately 1.4kg
Model
AC Type
Output
Input voltage
Input current
Surge current
Operating temperature
Output system
Output control system
External light control
Lighting on/off function
Cooling system
Installation
Weight
100V 200V 100V 200V 100V 200V 100V 200V
Single-channel out put
max.350 mA
Single-channel out put
max.700 mA
3-channel out put
for each channel max.350 mA
3-channel out put
for each channel max.700 mA
100 - 240V AC 50 / 60Hz
Dimension A
100 - 240V AC 50 / 60Hz
B
0.35 / 0.25A
(at AC 100/240V)
0.35/0.25 A
(at AC 100/240V)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
0 to +45˚C 0 to +45˚C
Continuous DC output Continuous DC output
Constant current control (the current can be changed) Constant current control (the current can be changed)
Supported (8bit digital) Supported ( for each channel, 8bit digital)
Supported (photocoupler insulation) Supported (photocoupler insulation)
Natural air cooling forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit Horizontal installation on the rubber supports at the bottom of the unit
Approximately 0.9kg Approximately 1.4kg
MLEP-A035W1
LRD-100V
MLEP-A035W1
LRD-200V
MLEP-A070W1
LRD-100V
MLEP-A070W1
LRD-200V
MLEP-A035W3
LRD-100V
MLEP-A035W3
LRD-200V
MLEP-A070W3
LRD-100V
MLEP-A070W3
LRD-200V
NEW MLEP Series
Output
channel
Maximum output current Digital type (D)
AC type
Model Number Legend
130
150
(6)
150
75
10
12015
55
13010
10
150
(6)
75
75
55
13010
10
150
(6)
75
75
130
150
(6)
150
75
10
12015
3Z4S-LT MLEP-A W LR - V
22 23
A080/230W Analog Series (Total current: 0.8 A or 2.3 A) A080/230W Digtal Series (Total current: 0.8 A or 2.3 A)
Models are available with an analog light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking. Models are available with a digital light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Ratings and Specifications
Dimensions
I/O Circuit DiagramsConnection Specifications I/O Circuit DiagramsConnection Specifications
Ratings and Specifications
These new power supplies are designed specifically for Moritex Constant-current LED Lights (except for the MCEP Series).
Even when combining with an LED Light from the broad lineup and possible applications, you can select the ideal
Constant-current Power Supply for the required current consumption. The Power Supplies suppress heat generation and will
make the most of the characteristics of any of the LED Light. External output controls and other features are also provided.
NEW MLEK Series
Model MLEK-A080W1LR-100V MLEK-A080W1LR-200V MLEK-A080W2LR-100V MLEK-A080W2R-200V
AC Type
100V 200V 100V 200V
Output Single-channel output of 0.8A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 0.8A for each channel
(for connection to all lights except the MCEP Series)
Input voltage 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz
Input current 0.3 / 0.15A
(at AC 100/240V)
0.3 / 0.15A
(at AC 100/240V)
Surge current 15A or lower (at 100V AC)
35A or lower (at 240V AC)
Operating temperature
0 to +45˚C
Output system Continuous DC output
Output control system
Constant current control (the current can be changed)
External light control
Supported (0 to 5V)
Lighting on/off function
Supported (photocoupler insulation)
Error output Supported (photocoupler insulation, control error)
Cooling system Natural air cooling
Installation
Horizontal installation on the rubber supports at the bottom of the unit
Weight Approximately 1kg
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
Continuous DC output
Constant current control (the current can be changed)
Supported (0 to 5V)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Natural air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1.3kg
Supported (0 to 5V dimmer signal / External VR input) Supported (0 to 5V dimmer signal / External VR input)
A BDimension
Model
AC Type
100V 200V 100V 200V
Output Single-channel output of 2.3A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 2.3A for each channel
(for connection to all lights except the MCEP Series)
Input voltage 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz
Input current 0.7 / 0.4A
(at AC 100/240V)
0.7 / 0.4A
(at AC 100/240V)
Surge current 15A or lower (at 100V AC)
35A or lower (at 240V AC)
Operating temperature
0 to +45˚C
Output system Continuous DC output
Output control system
Constant current control (the current can be changed)
External light control
Lighting on/off function
Supported (photocoupler insulation)
Error output Supported (photocoupler insulation, control error)
Cooling system forcible air cooling
Installation
Horizontal installation on the rubber supports at the bottom of the unit
Weight Approximately 1.1kg
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
Continuous DC output
Constant current control (the current can be changed)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1.4kg
A BDimension
Model
AC Type
100V 200V 100V 200V
Output Single-channel output of 0.8A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 0.8A for each channel
(for connection to all lights except the MCEP Series)
Input voltage 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz
Input current 0.3 / 0.15A
(at AC 100/240V)
0.3 / 0.15A
(at AC 100/240V)
Surge current 15A or lower (at 100V AC)
35A or lower (at 240V AC)
Operating temperature
0 to +45˚C
Output system Continuous DC output
Output control system
Constant current control (the current can be changed)
External light control
Lighting on/off function
Supported (photocoupler insulation)
Error output Supported (photocoupler insulation, control error)
Cooling system Natural air cooling
Installation
Horizontal installation on the rubber supports at the bottom of the unit
Weight Approximately 1kg
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
Continuous DC output
Constant current control (the current can be changed)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Natural air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1.3kg
A BDimension
Model
AC Type
100V 200V 100V 200V
Output Single-channel output of 2.3A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 2.3A for each channel
(for connection to all lights except the MCEP Series)
Input voltage 100 - 240V AC 50 / 60Hz 100 - 240V AC 50 / 60Hz
Input current 0.7 / 0.4A
(at AC 100/240V)
0.7 / 0.4A
(at AC 100/240V)
Surge current 15A or lower (at 100V AC)
35A or lower (at 240V AC)
Operating temperature
0 to +45˚C
Output system Continuous DC output
Output control system
Constant current control (the current can be changed)
External light control
Lighting on/off function
Supported (photocoupler insulation)
Error output Supported (photocoupler insulation, control error)
Cooling system forcible air cooling
Installation
Horizontal installation on the rubber supports at the bottom of the unit
Weight Approximately 1.1kg
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
Continuous DC output
Constant current control (the current can be changed)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1.4kg
A BDimension
MLEK-A080W1LRD-100V MLEK-A080W1LRD-200V MLEK-A080W2LRD-100V MLEK-A080W2RD-200V
Supported (8bit digital) Supported ( for each channel, 8bit digital)
MLEK-A230W1LRD-100V MLEK-A230W1LRD-200V MLEK-A230W2LRDB-100V MLEK-A230W2LRDB-200V
Supported (8bit digital) Supported ( for each channel, 8bit digital)
90
6
75
55
150
13010
110
75
55
190
17010
6
3.9k
5V
47k
Relay Photo-coupler Transistor
COMMON
LSB
5V,24V
5V,24V
A A A
A3.9k
3.9k
MSB
AON/OFF
Error
5V=1.3k
24V=6.2k
5V,24V
5V
47k
5V
5V
330
47k
BB
1
8
10
11
9
3.9k
5V
47k
Relay Photo-coupler Transistor
ON/OFF
LSB
5V,24V
5V,24V
5V=1.3k
24V=6.2k
A A A
A
Error
5V,24V
5V=1.3k
24V=6.2k
5V,24V
5V
5k
2.5V Ref
0-5V
10k
10k
B
B
5V
330
2
5
6
9
10
11
12
13
1
Dimensions
90
6
75
55
150
13010
110
75
55
190
17010
6
New Power Supplies for MG-Wave Series
1
8
9
15
Output ON/OFF signal (+)
Output ON/OFF signal (-)
NC
NC
Control error signal (open collector)
Control error signal (open emmitter)
NC
NC
External VR dimmer signal input
External 0-5V Analog dimmer signal input
input GND
External 0-5V / external VR input switching
2.5 VDC bias power supply output
NC
NC
1
8
9
15
8bit digital input 20 (LSB)
8bit digital input 21
8bit digital input 22
8bit digital input 23
8bit digital input 24
8bit digital input 25
8bit digital input 26
8bit digital input 27 (MSB)
COMMON (+)
Output ON/OFF signal
Control error signal output
NC
NC
NC
NC
Maximum output current
Output
channel Digital type(D)
AC type
Model Number Legend
200V
CE (PS) E/UL/CSA (PS) E
100V
* Note: The AC power cable that is enclosed depends on the voltage.
Be sure to use a suitable power supply for the country in which the Controller is used.
Adapter
(for use in Japan only)
3Z4S-LT MLEK-A W LR - V
MLEK-A080W LR/MLEK-A230W LR MLEK-A080W LR/MLEK-A230W LR MLEK-A080W LRD/MLEK-A230W LRD MLEK-A080W LRD/MLEK-A230W LRD
A(MLEK-A W1LR) A(MLEK-A W1LRD) B(MLEK-A W2LRD)
B(MLEK-A W2LR)
MLEK-A230W1LR-100V MLEK-A230W1LR-200V MLEK-A230W2LR-100V MLEK-A230W2LR-200V
24 25
Ratings and Specifications
Dimensions
NEW MLEK Series
A(MLEK-D770W4LRD)
Multichannel series
Models are available with a digital light adjustment and for four
channels. A wide voltage input (100 to 240 VAC) is supported,
along with Rohs compliance.
The digital light adjustment provides the previous 8-bit, 256-step
control and a new 10-bit, 1,024-step control.
*CE Marking.
Connection Specifications I/O Circuit Diagrams
MLEK-D770W4LRDMLEK-D770W4LRD
POWER
MLEK-D770W4LRD
C O R P O R A T I O N
REMO
CH 4
MANU
CH 3
CH 2
FINE
CH 1
COARSE
EXT
MAINS Supply
OUT4
FAN3
OUT3 OUT1
FAN1FAN2
OUT2
MLEK-D770W4LRD
0 0
0
0
0
0
F
F
2514
1
191716 1815
43
2 65
232220 21 24
10
97 8 1211 13
120
55
100
200
220
Model MLEK-D770W4LRD-100V MLEK-D770W4LRD-200V
AC Type 100V 200V
Output (for connection to all lights except the MCEP Series)
Input voltage
Dimension
100 - 240V AC 50 / 60Hz
A
Input current 1.7/0.8 A
(at AC 100/240V)
Surge current 18A or lower (at 100V AC)
41A or lower (at 230V AC)
Operating temperature
0 to +45˚C
Output system Continuous DC output
Output control system
Constant current control (the current can be changed)
External light control
Supported ( for each channel, 8bit digital or 10 bit digital)
Lighting on/off function
Supported (photocoupler insulation)
Error output Supported (photocoupler insulation, control error)
Cooling system forcible air cooling
Installation
Horizontal installation on the rubber supports at the bottom of the unit
Weight Approximately 2kg
1
13
14
25
10bit digital input 20 (10bit/LSB)
10bit digital input 21
10bit digital input 20 (8bit/LSB)
10bit digital input 23
10bit digital input 24
10bit digital input 25
10bit digital input 26
10bit digital input 27
10bit digital input 28
10bit digital input 29 (MSB)
COMMON(+)
CH1 Output ON/OFF signal
CH2 Output ON/OFF signal
CH3 Output ON/OFF signal
CH4 Output ON/OFF signal
CH1 Control error signal
CH2 Control error signal
CH3 Control error signal
CH4 Control error signal
CH Select
CH Select
Write TRG
NC
NC
NC
AC type
Model Number Legend Multichannel series
3Z4S-LT MLEK- D770W4LRD- V
4-channel output Total max. 7.7A (CH1 CH3:max. 2.3A CH4:max. 0.8A)
Optional Accessories
Adapter : MAD Series
Light control film : MLM Series
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
The MAD series is essential when a diffusion or polarizing plate is attached to a ring light.
Product type Compatible light models
Ring light
Diffusion or polarizing plate
MAD series adapter
(fastened with three screws)
How to use the MAD series
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
The MLM series are resin films that transform diffused light into
near-parallel light. Attached to a simulated coaxiallight,
it makes the light distribution pattern smoother.
Haif mirror
Usage for
the MLM Series
Lighting intensity distribution charateristics of the MSCL-CR105
Cross-section of pseudo
coaxial epi-illumination
(Mounted in groove) Diffusion board
Lighting part
Lighting intensity distribution characteristics
without a light control film
Lighting intensity distribution characteristics with a light
control film (with the power source volume increased)
2D luminance level diagram 2D luminance level diagram
Product type Compatible light models
MAD-DR10 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 10
MAD-DR16 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 16
MAD-DR28 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 28
MAD-DR31 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 31
MAD-DR50 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 50
MAD-DR56 Plate attachment adapter for direct-ring lights MDRL-CR (CG,CB,CW) for 56
MLM-SC56 Light control fi lm for simulated coaxial lights MSCL-CR (CG,CB,CW) for 56
MLM-SC74 Light control fi lm for simulated coaxial lights MSCL-CR (CG,CB,CW) for 74
MLM-SC105 Light control fi lm for simulated coaxial lights MSCL-CR (CG,CB,CW) for 105
New
New
New
New
New
■Options for lights
The following optional accessories are available to improve the functionality of the lighting devices.
Diffusion plate:MDF Series
The MDF series features a diffusion plate that increases the light diffusion and reduces reflection and glare from the element.
Product type Compatible light modelsModel
Polarizing plate:MPL Series
The MPL series polarizing plates are attached to LEDs in order to reduce unwanted glare and reflection during image processing.
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
MDF-DQ108 Square oblique light diffusion plate MDQL-CR(CG,CB,CW) for 108, 4 pieces/set
MDF-DR10 Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 10
MDF-DR16 Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 16
MDF-DR28 Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 28
MDF-DR31 Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 31
MDF-DR50 Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 50
MDF-DR56 Diffusion plate for direct-ring lights MDRL-CR (CG,CB,CW) for 56
MDF-LR25 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 25
MDF-LR48 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 48
MDF-LR68 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 68
MDF-LR100 Diffusion plate for low-angle ring lights MLRL-CR (CG,CB,CW) for 100
MDF-BR5015 Diffusion plate for bar lights MBRL-CR (CG,CB,CW) for 5015
MDF-BR7530 Diffusion plate for bar lights MBRL-CR (CG,CB,CW) for 7530
MDF-BR13015 Diffusion plate for bar lights MBRL-CR (CG,CB,CW) for 13015
Product type Compatible light models
MPL-DQ108 Square oblique light polarizing plate MDQL-CR(CG,CB,CW) for 108, 4 pieces/set
MPL-SC56 Simulated coaxial light polarizing plate MSCL-CR (CG,CB,CW) for 56
MPL-SC74 Simulated coaxial light polarizing plate MSCL-CR (CG,CB,CW) for 72
MPL-SC105 Simulated coaxial light polarizing plate MSCL-CR (CG,CB,CW) for 105
MPL-DR10-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 10
MPL-DR16-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 16
MPL-DR28-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 28
MPL-DR31-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 31
MPL-DR50-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 50
MPL-DR56-B Polarizing plate for direct-ring lights MDRL-CR (CG,CB,CW) for 56
MPL-BR5015-B Polarizing plate for bar lights MBRL-CR (CG,CB,CW) for 5015
MPL-BR7530-B Polarizing plate for bar lights MBRL-CR (CG,CB,CW) for 7530
MPL-BR13015-B Polarizing plate for bar lights MBRL-CR (CG,CB,CW) for 13015
Model
Model
Model
*When ordering, provide the specific model number after "SZ4S-LT" (example: SZ4S-LT MDF-DR10).
26 27
■Options for bridging lights with lenses
The following optional adapters are designed to be used with Moritex’s lenses.
Simulated Coaxial Light/CCTV Lens Adapter: MLA-SC Series
MML/CCTV Lens Adapter
The MLA-SC Series enables small siulated coaxial lights to be mounted at the end of CCTV lenses.
Model Product type Compatible light models
Model Product type Compatible light models
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
*Do not apply any unnecessary load to the lens.
Sharp-cut Filter R64 Series
These Files can be attached to the end of a CCTV lens to prevent light interference when using red light.
Model
ML-R64-25 Sharp-cut filter for mounting to end of lens M25.5 P0.5 lenz
ML-R64-27 Sharp-cut filter for mounting to end of lens M27 P0.5 lenz
ML-R64-30 Sharp-cut filter for mounting to end of lens M30.5 P0.5 lenz
CCTV lens
Lens
MLA-DR series
Base/lens adapter
Base unit
Simulated
coaxial light
How to use the MLA-SC series
How to use the MLA-DR series
The adapter can be easily used in combination with Moritex’s lenses.
The rotation angle is adjustable after
fastening the light to the lens.
Direct-ring light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Product type Applications Length
Cable Diagrams
(1000,2000,3000)
4P 4P
1P 1P
(1000,2000,3000)
3P 3P
1P 1P
(1000,2000,3000)
2P
1P
2P
1P
M-RCB401L 4-pin type extension cable 1m
M-RCB402L 4-pin type extension cable 2m
M-RCB403L 4-pin type extension cable 3m
M-RCB301L 3-pin type extension cable 1m
M-RCB302L 3-pin type extension cable 2m
M-RCB303L 3-pin type extension cable 3m
M-XS402C Pin type extension cable 2m
M-XS405C Pin type extension cable 5m
M-XS410C Pin type extension cable 10m
M-RCB301XS Pin type
MSPP-MLEP-A070 conversion cable
1m
M-RCB001L 2-pin type extension cable 1m
M-RCB002L 2-pin type extension cable 2m
M-RCB003L 2-pin type extension cable 3m
MC-EXC-02 Cable for DSUB15 pin external control 2m
MC-EXC-07 Cable for DSUB15 pin external control
Cables
Model
A
A
A
B
B
B
C
C
C
D
E
E
E
―
―
D (M-RCB301XS)
3
14
2
0+0
-2
4
0
-2
12+2
-0
40.0±5
22+10
-0
5.7
14.9
12 dia.
43.2
1000+50
-0
100±20
3P
1P
White/yellow
(no connection)
RoHS
43
21
43
2
1
6
39.5±5
44.7
100±20
40.5 X
Male
Female
RoHS
Size Product type
A (M-RCB4 L*Straight connection)
B (M-RCB3 L*Straight connection)
C (M-XS4 C)
E (M-RCB0 L*Straight connection)
For power sources for built-in fans
For the MSPP series and MLEP-A070
For the MSPP series
For the MCEP series
For all lights (except the MCEP series)
MLA-SCBS Mount base for simulated coaxial lights MSCL-C 24/39/56
MLA-SCM255 Base/lens adapter for simulated coaxial lights M25.5P0.5 lens
MLA-SCM270 Base/lens adapter for simulated coaxial lights M27P0.5 lens
MLA-SCM305 Base/lens adapter for simulated coaxial lights M30.5P0.5 lens
MLA-DR1616 Lens attachment adapter MDRL-C 16 and R-16 mm lenses
MLA-DR3125 Lens attachment adapter MDRL-C 31 and R-25 mm lenses
MLA-DR3130 Lens attachment adapter MDRL-C 31 and R-30 mm lenses
MLA-DR31M255 Lens attachment adapter MDRL-C 31 and M25.5P0.5 lenses
MLA-DR31M270 Lens attachment adapter MDRL-C 31 and M27P0.5 lenses
MLA-DR31M305 Lens attachment adapter MDRL-C 31 and M30.5P0.5 lenses
Cable Diagram
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
3Z4S-LE-MEBL-CB145 3Z4S-LE ML-0614 3Z4S-LE ML-10035 3Z4S-LE ML-1214 3Z4S-LE-MSRL-CW44 3Z4S-LT
MBRL-CR13015 3Z4S-LT MBRL-CR5015 3Z4S-LT MBRL-CR7530 3Z4S-LT MBRL-CW13015 3Z4S-LT MBRL-
CW7530 3Z4S-LT MDBL-CR70 3Z4S-LT MDBL-CW180100 3Z4S-LT MDBL-CW70 3Z4S-LT MDF-DR16 3Z4S-LT
MDF-DR31 3Z4S-LT MDF-DR50 3Z4S-LT MDML-CW156 3Z4S-LT MDRL-CR16 3Z4S-LT MDRL-CR31 3Z4S-LT
MDRL-CR35 3Z4S-LT MDRL-CR50 3Z4S-LT MDRL-CUV31 3Z4S-LT MDRL-CW31 3Z4S-LT MDRL-CW50 3Z4S-LT
MDRL-CW56 3Z4S-LT MEBL-CB10080 3Z4S-LT MEBL-CR10080 3Z4S-LT MEBL-CR50 3Z4S-LT MEBL-CW10080
3Z4S-LT MEBL-CW145 3Z4S-LT MEBL-CW7050 3Z4S-LT MLEK-A080W1LR-100V 3Z4S-LT MLEK-A230W1LR-100V
3Z4S-LT MLEK-A230W2LRDB-100V 3Z4S-LT MLEK-C080E1LS 3Z4S-LT MLEK-C100E1TSX 3Z4S-LT MLEK-
D770W4LRD-100V 3Z4S-LT MLEK-D770W4LRD-200V 3Z4S-LT MLRL-CR48
