PL IA N T Features M RoHS compliant* Suitable for most types of soldering processes *R oH S CO 4 isolated resistors in an 0804 size Paper tape on plastic reel for automatic package E24 series from 10 ohms to 1 megohm Concave termination style Resistance tolerance 5 % placement Model CAT10 - Chip Resistor Array Characteristics Number of Elements............. 4 (isolated) Power Rating per Resistor @ 70 C .............................................0.0625 W Package Power Rating @ 70 C ...............................................0.250 W Operating Temperature Range ............................... -55 C to +125 C Derated to 0 Load @..................+125 C Max. Working Voltage......................25 V Max. Overload Voltage ....................50 V Resistance Tolerance .................... 5 % Resistance Range/E24 Series ........................10 ohms to 1 megohm plus Zero-ohm Jumper T.C.R. ................................ 250 ppm/C Packaging........... 10,000 pieces per reel Product Dimensions 0.15 (.006) 0.20 0.10 (.008 .004) 0.30 0.15 (.012 .006) 1.0 0.10 (.039 .004) 0.30 0.15 (.012 .006) 0.20 0.10 (.008 .004) 0.5 (.020) 2.0 0.10 (.079 .004) 0.28 0.10 (.011 .004) 0.40 0.15 (.015 .006) MM (INCHES) DIMENSIONS: 0.25 (.010) Construction Marking Protective Glass Overcoat Thick Film Resistive Element Land Pattern 0.50 (0.020) Conductor 0.25 ~ 0.30 (0.010 ~ 0.012) Side Termination 0.45 (0.018) 1.45 ~ 1.85 (0.057 ~ 0.073) High Purity Alumina Substrate How To Order CA T 10 - 103 J 4 LF Type * T = Concave Model * 10 = 0804 Package Size Resistance Code * <10 ohms: "R" represents decimal point (example: 4R7 = 4.7 ohms) * 10 ohms: First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms) * 000 = Zero Ohm Jumper Resistance Tolerance * J = 5 % Derating Curve Rated Load (%) Chip Arrays Isolated Circuit 70 C 100 80 60 40 20 0 125 C ISOLATED CIRCUITS 8 7 R 1 -55 6 R 2 40 60 80 100 120 140 160 Ambient Temp. (C) Typical Part Marking None on part. Label on reel will include part number. Resistors * 4 = 4 pcs. Terminations * LF = Tin-plated (RoHS compliant) For Standard Values Used in Capacitors, Inductors, and Resistors, click here. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 5 R 3 R 4 Model CAT10 - Chip Resistor Array Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1> Maximum of 20 seconds between 260 C peak +255 C and +260 C <1> 255 C 225 Temperature (C) 220 C 190 C 60 - 90 seconds 175 Ramp Down 6 C/second 150 C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 C/second maximum 25 0 50 100 150 Time (seconds) 200 250 300 Packaging Dimensions 0.5 MAX. (.020) 1.5 + 0.1 - 0 (.059 + .004 - 0) 2.0 0.5 (.079 .020) 4.0 0.1 (.158 .004) 13.0 0.2 (.511 .008) 3.5 0.05 (.138 .002) 1.0 MAX. (.040) 2.3 0.2 (.090 .008) 1.3 0.2 (.051 .008) 60 (2.362) 8.0 0.2 (.315 .008) 2.0 0.05 (.079 .002) 180 (7.087) DIMENSIONS: 21.0 0.8 (.827 .031) 9.0 0.3 (.354 .012) 11.4 1.0 (.449 .040) MM (INCHES) REV. 01/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.