TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 3.5-GHz, HIGH DYNAMIC RANGE, LOW-NOISE DOWN-CONVERTER DEVICE INFORMATION FEATURES MXRI RFATTN 17 16 GND GND 18 15 RFAGC VDDA 2 14 IFOP GND 3 13 IFON GND 4 12 VDDIF LNAI 5 11 IFB 6 7 8 9 10 VDDLO LNAO 1 GND * * 19 LON * * 20 LOP * * RGP PACKAGE (TOP VIEW) VDD2 * * Performs First Down-Conversion in 3.5-GHz Radios (3300-3800 MHz) Integrated LNA/Mixer/IF Amp/LO Buffer Provision for External Image Reject/Band-Pass Filter Low Noise-Figure/High Linearity Digital 10-dB Attenuator for High-Level Signals Frequency Range: 3.3-3.8 GHz 28 dB of Gain with 20 dB of Gain Control (10-dB Fixed) 2.5-dB Noise Figure, Typical LO Drive Level = 0 dBm, Typical GND * P0031-02 DESCRIPTION The TRF1216 is the first of two integrated circuits used in the receiver section of Texas Instruments' 3.5-GHz radio chipset. The TRF1216 down-converts the 3.5-GHz input frequency to an intermediate frequency in the range of 400 MHz to 500 MHz. The device provides a differential output that passes through a SAW filter before connecting to a second down converter. For the best performance, Texas Instruments TRF1212 should be used to perform both the second down conversion and also provide the local oscillator for the TRF1216. The TRF1216 includes a LNA with switchable attenuation, a balanced mixer, a variable gain IF amplifier and a differential LO Buffer for improved performance. In order to provide exceptional image rejection and extra jammer immunity, the TRF1216 offers a signal path to an off-chip filter. Specifications are provided assuming an in-band 2-dB insertion loss filter. To maximize input dynamic range, a 10-dB switchable attenuator is provided in the RF path as well as 10 dB of analog IF gain control. After the image reject filter, an on-chip Balun converts the signal from single ended to differential in order to provide better noise immunity at the mixer. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2005, Texas Instruments Incorporated TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. BLOCK DIAGRAM The detailed block diagram and the pin-out of the ASIC are shown in Figure 1 and Table 1. VDD2 VDD1 VDDIF LNAO MXRI Dual Stage-LNA VGA Mixer IFOP IFON BALUN LNAI IFB RFAGC LOP LON LO Buffer GND RFATTN VDDLO B0084-01 Figure 1. Detailed Block Diagram of TRF1216 TERMINAL FUNCTIONS TERMINAL NO. NAME I/O TYPE DESCRIPTION 1 LNAO O Analog LNA Output, 50 , ac-coupled 2 VDD1 I Power LNA1 DC Bias (+5 V nominal) 3, 4, 6, 9, 16, 19 GND - - 5 LNAI I Analog RF input - Needs dc block and input matching for optimum noise figure 7 LOP I Analog LO input positive, ac coupled 8 LON I Analog LO input negative, ac coupled 10 VDDLO I Power LO DC Bias (+5 V nominal) 11 IFB - - 12 VDDIF I Power IF Bias Network dc Bias (+5 V nominal) 13 IFON O Analog IF output and bias (see the application schematic for connections). 14 IFOP O Analog IF output and bias (see the application schematic for connections). 15 RFAGC I Analog Input voltage for analog gain control VRFAGC = 0 V to 1.5 V Max gain at VRFAGC = 0 V Min gain at VRFAGC = 1.5 V 17 RFATTN I Digital TTL control for switched attenuator TTL low - Attenuator switched in TTL high - Attenuator switched out Ground Not connected for normal operation. IF Bias Adjustment. Do not ground this pin or connect to any other pin. 18 MXRI I Analog Mixer Input 50 20 VDD2 - Power LNA2 dc bias (+5 V nominal) Back GND - - 2 Back of package has metal base that must be grounded for thermal and RF performance. TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 ABSOLUTE MAXIMUM RATINGS VALUES UNIT VDD DC supply voltage, VDD 0 to 5.5 V PIN RF input power 10 dBm TJ Junction temperature 200 C PD Power dissipation 1100 mW VD Digital input voltage -0.3 to 5.5 V VA Analog input voltage -0.3 to 5 V JC Thermal resistance 9.1 C/W Tstg Storage temperature -40 to 105 C Top Operating temperature -40 to 85 C 260 C junction-to-case (1) Lead temperature (40 Sec Max) (1) Thermal resistance is junction to ambient assuming thermal pad with nine thermal vias under package metal base. See the recommended PCB layout. ELECTRICAL CHARACTERISTICS The characteristics listed in the following tables are at VCC = 5 V, TA = 25C unless otherwise specified. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT 5 5.5 V 175 200 mA DC CHARACTERISTICS VDD Supply voltage IDD Total supply current I LNA1 LNA1 supply current Pin 2 (VDD1) 35 mA I LNA2 LNA2 supply current Pin 20 (VDD2) 35 mA IIF IF AMP supply current Pin 12 (VDDIF) plus IF drain bias on pins 13 and 14 (IFOP, IFON) 55 mA ILO LO supply current Pin 10 (VDDLO) 50 mA VAGC Gain control voltage 0 2 V IAGC Gain control current 0 100 A VIH Input high voltage 2.5 5 V VIL Input low voltage 0 0.8 V IIH Input high current 300 A IIL Input low current -50 A 3 TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 DOWNCONVERTER CHARACTERISTICS Unless otherwise stated VDD = 5 V, FRF = 3500 MHz, TA = 25C MAX UNIT FRF RF input frequency PARAMETER 3300 3800 MHz FLO LO input frequency 2800 3400 MHz FIF IF output frequency 400 480 500 MHz G Maximum gain VAGC = 0 V, RFATTN disabled, Measured into 100- differential load 27 30 33 dB AGC Analog gain control range VAGC from 0 to 1.5 V, Any RFATTN setting. Measured into 100- differential load 7 10 ATTN Switched attenuator range RFATTN from high-to-low, any VAGC setting. Measured into 100- differential load 8.5 10 GHG Gain flatness full band Any 200-MHz band GNB Gain flatness / 6 MHz Any 6-MHz band Noise figure (1) NF IP-1dB Input power at 1-dB compression TEST CONDITIONS MIN TYP 1 VAGC = 0 V, RFATTN disabled 2.5 VAGC = 0 V, RFATTN enabled 4.8 VAGC = 1.5 V, RFATTN disabled 3.2 VAGC = 1.5 V, RFATTN enabled 6.8 VAGC = 0 V, RFATTN disabled -17 VAGC = 0 V, RFATTN enabled -6 VAGC = 1.5 V, RFATTN disabled -10 VAGC = 1.5 V, RFATTN enabled -4 VAGC = 0 V, RFATTN disabled -7 VAGC = 0 V, RFATTN enabled -1 VAGC = 1.5 V, RFATTN disabled -5 VAGC = 1.5 V, RFATTN enabled 5 dB 11.5 dB 2 dB 0.4 dB dB dBm IIP3 Input 3rd order intercept point PLO LO input power Referenced to 100- differential LO to MXRI leakage LO input = 3 dBm, VAGC = 0 V -35 -45 dB LO to IF leakage LO input = 3 dBm, VAGC = 0 V -40 -50 dB LNAO to RXI isolation FRF F = 3300 to 3800 MHz, RFATTN = TTL High (1) 4 Assured by lab characterization/design and not subject to production test. 0 40 dBm dBm dB TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS Measurements resulting in the following graphs were taken on the evaluation board of the ASIC (see Figure 9). 40 VAGC = 0 V 35 Gain With Attenuator Disabled 30 Gain - dB 25 20 15 Gain With Attenuator Enabled 10 5 0 3300 -40C 25C 85C 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 f - Frequency - MHz G001 Figure 2. Gain vs Frequency for VAGC = 0 V 30 -40C 25C 85C VAGC = 1.5 V 25 Gain - dB 20 Gain With Attenuator Disabled 15 10 Gain With Attenuator Enabled 5 0 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 f - Frequency - MHz G002 Figure 3. Gain vs Frequency for VAGC = 1.5 V 5 TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS (continued) 30 TA = 25C 25 Gain - dB 20 Attenuator Enabled 15 10 5 3300 MHz 3550 MHz 3800 MHz 0 0.00 0.25 Attenuator Disabled 0.50 0.75 1.00 1.25 1.50 VAGC - Analog Gain Control Voltage - V G003 Figure 4. Gain vs VAGC for Different Frequencies, (TA = 25C) 5 TA = 25C Input P1dB - dBm 0 -5 Attenuator Enabled, VAGC = 1.5 V Attenuator Enabled, VAGC = 0 V -10 Attenuator Disabled, VAGC = 1.5 V -15 Attenuator Disabled, VAGC = 0 V -20 -25 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 f - Frequency - MHz G004 Figure 5. Input P1dB vs Frequency, (TA = 25C) 6 TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS (continued) 10 TA = 25C Attenuator Enabled, VAGC = 1.5 V 0 Attenuator Enabled, VAGC = 0 V Attenuator Disabled, VAGC = 1.5 V -5 Attenuator Disabled, VAGC = 0 V -10 -15 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 f - Frequency - MHz G005 Figure 6. Input IP3 vs Frequency, (TA = 25C) 30 7 -40C 25 6 25C 20 5 85C 15 4 85C 10 25C 5 NF [dB] Gain [dB] Input IP3 - dBm 5 3 2 -40C 0 1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Frequency [GHz] Figure 7. LNA Noise Figure vs Frequency With VAGC = 0 V 7 TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 APPLICATION INFORMATION A typical application schematic is shown in Figure 9. The PCB material recommendations are shown in Table 1 and Figure 8. Table 1. PCB Recommendations Board Material FR4 Board Material Core Thickness 10 mil Copper Thickness (starting) 1 oz Prepreg Thickness 8 mil Recommended Number of Layers 4 Via Plating Thickness 1/2 oz Final Plate White immersion tin Final Board Thickness 33-37 mil Dia. 15 Mil 1 oz. Copper + 1/2 oz. Copper Plated Upper and Lower Surfaces Layer 1 10 Mil Core FR4 35 Mil Layer 2: 1 oz. Copper 8 Mil Prepreg Layer 3: 1 oz. Copper 10 Mil Core FR4 DuPont CB 100 Conductive ViaPlug Layer 4 1/2 oz. Copper Plated M0020-02 NOTE: Top and bottom surface finish: copper flash with 50-70 in white tin immersion. Figure 8. PCB Construction and Via Cross Section 8 TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 Z = 50 W RFATTN BPF VDD VRFAGC (A) 100 pF (A) 100 pF 0.01 mF 22 nH (B) IF OUT_POS 2 100 pF 16 3 4 10 pF 270 nH GND MXRI RFATTN 17 LNAO RFAGC IFOP VDD1 (A) GND IFON GND VDDIF 15 (A) RF_IN IFB LNAI 7 LO_POS GND LON LOP GND 0W 6 8 9 0.01 mF 100 pF 270 nH 14 22 nH 13 (B) IF OUT_NEG 12 VDD (A) 5 VDD 11 100 pF 0.01 mF VDDLO 0.01 mF 18 GND Back 1 19 VDD2 20 10 (A) 100 pF 0.01 mF LO_NEG S0122-01 A. Place 100-pF capacitors close to package pins. B. Place 22-nH inductors close to package pins. Figure 9. Recommended Application Schematic 9 TRF1216 www.ti.com SLWS172A - APRIL 2005 - REVISED DECEMBER 2005 2.00 0.50 TYP 0.20 TYP 0.60 TYP PIN 1 1.00 TYP 2.80 2.00 1.00 TYP DIA 0.38 TYP 0.25 TYP 2.80 Solder Mask. No Solder Mask Under Chip, On Lead Pads or On Ground Connections. Notes: 9 Via Holes, Each 0.38 mm. Dimensions in mm M0022-02 Figure 10. Recommended Pad Layout 10 PACKAGE OPTION ADDENDUM www.ti.com 21-Jul-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TRF1216IRGPR ACTIVE QFN RGP 20 3000 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TRF1216IRGPRG3 ACTIVE QFN RGP 20 3000 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TRF1216IRGPT ACTIVE QFN RGP 20 250 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TRF1216IRGPTG3 ACTIVE QFN RGP 20 250 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TRF1216IRGPR QFN RGP 20 3000 330.0 12.4 4.3 4.3 1.5 8.0 12.0 Q2 TRF1216IRGPT QFN RGP 20 250 330.0 12.4 4.3 4.3 1.5 8.0 12.0 Q2 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TRF1216IRGPR QFN RGP 20 3000 338.1 338.1 20.6 TRF1216IRGPT QFN RGP 20 250 338.1 338.1 20.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated