TLP716F(D4) - Toshiba America Electronic Components, Inc.

2007-10-01 1

Weight：0.26 g (typ.)

TOSHIBA 11-5J101

Unit in mm

0.25± −0.05

+0.10

4.58±0.25

0.4±0.1

1 2 3

6.8±0.25

1.27±0.2

3.65

+0.15

−0.25

6 5 4

11.7±0.3

3.9

+0.25

−0.15

0.75±0.25

7.62±0.25

11-5J101

TOSHIBA Photocoupler GaAℓAs IRED & Photo−IC

TLP716F

Plasma display panel

High Speed Interface

Factory Automation

The TOSHIBA TLP716F consists of a GaAℓAs light emitting diode

and a high speed photodetector. This unit is 6-lead SDIP. TLP716F is 50%

smaller than 8PIN DIP and has suited the safety standard reinforced insulation

class. So, mounting area in safety standard required equipment can be

reduced.

Absolute maximum ratings and electrical characteristics are the same as the

TLP716 technical data sheets.

z Inverter Logic (totempole output)

z Package Type : SDIP6

z Guaranteed Performance Over Temperature : −40~100°C

z Power Supply Voltage : 4.5~5.5 V

z Input Thresholds Current : IFHL=6.5 mA(max.)

z Propagation delay Time (tpHL/ tpLH) : 75 ns(max.)

z Switching speed : 15 MBd(typ.) (NRZ)

z Common mode transient immunity : 10 kV/us(min.)

z Isolation voltage : 5000 Vrms(min.)

z UL Recognized :UL1577, File No.E67349

z Option (D4)

TÜV Approved : EN60747−5−2

Maximum Operating Insulation Voltage : 1140 VPK

Highest Permissible Over Voltage : 8000 VPK

(Note): When an EN60747−5−2 approved type is needed,

Please designate “Option(D4)”

z Construction Mechanical Rating

Truth Table

Creepage Distance

Clearance

Insulation Thickness

8.0 mm (min)

0.4 mm (min)

Input LED Tr1 Tr2 Output

H ON OFF ON L

L OFF ON OFF H

VCC

GND

SHIELD

1:ANODE

2:N.C.

3:CATHODE

4:GND

5:Vo

6:Vcc

Pin Configuration (Top View)

0.1

F bypass capacitor must be

connected between pins 6 and 4.

VCC

GND

ICC

SHIELD

3－

1＋

Tr1

Tr2

Schematic

2007-10-01 2

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must

also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,

the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA

Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are

solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the

appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any

information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other

referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO

LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.

• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or

vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.